A customer is implementing an SAP HANA environment and is looking for an alternative to an entirely in-memory database.
Which storage technology should you recommend?
A customer wants to implement a new storage network, but wants to retain the ability to connect with legacy fiber channel-based components.
Drag the appropriate component to each box on the diagram to design a new storage network.
A customer want to implement a virtualized environment and want to provide independent storage access to individual virtual servers. Which feature need to enabled on the B-series FC switches to support this solution?
You are designing a solution that will have a new HPE Synergy frame and an HPE 3PAR StoreServ 8200 storage array with only the built-in ports. This new environment must keep the infrastructure within the data center to a minimum.
Which interconnect module will achieve this goal?
You need to deploy a Recovery Manager Central appliance and integrate it with a customer’s 3PAR system.
Which information must be collected from the customer in order to proceed with the installer? (Choose two.)
You are proposing a StoreOnce solution to a customer that has always used tape for a backup target.
What should you suggest to ensure that the StoreOnce deduplication is correctly sized?
You are asked to review an installation plan for a new Primera storage array. The array will go into an existing environment that has been in production for over 4 years. It includes:
What should you use to find appropriate installation and planning guides?
A customer need to server 40TB via file protocols including SMB and FTP to a board range of
client operating system in one location .security protocol dictate that data must be encrypted with FIPS 140-2 compliance. Which HPE storage solution you recommend?
Which value does an HPE Nimble solution provide in addition to other HPE storage solutions
Which protocols are currently used in the front end by HPE 3PAR StoreServ systems? (Choose two.)
In an ISCSI based storage system Proof-Of-Concept project ,the customer is not satisfied with the performance of their video streaming application .What would you recommended to the customer to optimize the excisting environment?
An HPE 3PAR StoreServ 9000 All-Flash Array customer plans to deploy a secondary array 20 km away from their primary array to enable storage replication over a dark fibre. Their existing environment consists of one HPE Synergy Frame 12000, HPE SN6000B Fibre Channel Switches, HPE FlexFabric 5700 Switch Series, and HPE StoreOnce Systems.
Which HPE license is required to meet the customer’s technical requirements?
What has to taken into account when performing capacity planning for HPE Nimble storage using deduplication?
A customer is a cloud service provider with infrastructure powered by HPE 3PAR Storeserv 9000.The customer is concern about their ability to ensure the quality of service and protect their tenants from unpredictable bursts of I/O from other tenants. What should you recommended to your customer ?
A customer is looking for a centralized file-sharing solution that can provide print services in addition to 15TB of storage.
Which solution component should you recommend?
Users are complaining about poor performance with their Data Warehouse application.
What is an effective solution to increase their performance at minimal cost?
Which HPE storage solutions offer a two-tier backup solution for hybrid cloud with optimal recovery time? (Choose two.)
What advantage does the Unified API that is part of HPE’s composable strategy provide?
You are presenting the HPE StoreEver portfolio to a media agency.
What advantage is offered when using LTFS?
Which management interface uses four basic commands (Create ,read, update ad delete )to
enable administrators to define ad radically simply management processes?
A customer needs to be manually map out preferred paths within a multi-switch fabric, based on application ,priority ,and topology, while allowing failover to a non-preferred path if the
preferred path fails, Which B-series FC switch functionality should be used to provide this?
Which storage feature is supported by both the HPE StoreVirtual and the HPE 3PAR StoreServ storage, and is a key differentiator of HPE storage solutions in the industry?
You are configuring a new HPE 3PAR solution and need to create a new disk group with a defined RAID level.
Click the appropriate option where the RAID can be selected.
Match the type of storage found in today’s market to the HPE storage solution optimized for
that capacity?
Which HPE 3PAR StoreServ feature allows a host to continue I/O uninterrupted during a firmware upgrade?
You are designing a new storage environment for a customer. They need good performance, but need to keep costs to a minimum.
They have a very limited staff, and staff is concerned about learning new technologies. You plan to recommend a Nimble HF20 solution.
Which storage connectivity components should you recommend?
A customer is planning to upgrade their HF40 controllers to support additional I/O requirements.
To which model can they upgrade to meet their new requirements?
You are presenting a Nimble solution based on CS3000 hardware to a customer. Which support advantage will be provided with this solution(select two)
Which actions can be done within InfoSight Cross-Stack Analytics for VMware and Hyper-V? (Choose two.)
A customer implemented the HPE StoreEver MSL6480 Tape Library.
Which HPE Software can the system administrator use to check the health of the library and monitor its utilization?
What performance benefit is provided by using the HPE StoreVirtual DSM for Microsoft MPIO instead of the standard MPIO?
You want to deploy Recovery Manager Central to a customer environment.
How can you accomplish this? (Choose two.)
Which value does a Nimble solution provide in addition to other HPE storage solutions?
A customer is planning to replace their existing LTO-6 tape library with a new HPE StoreEver MSL2024 tape library. They want to reuse their existing LTO-6 tape cartridges for reads and writes.
What is the latest tape drive technology that will provide backward compatibility?
A customer needs a centralized solution for storing departmental data to be accessed by Windows-based laptops and other personal devices.
Which solution should you recommend?
You need to create an N:M relationship between VMware hypervisors and virtual volumes with the least amount of administrative overhead.
Click the option where you can create a group of VMware hypervisors for volumes provisioning.
A customer is implementing a new high performance database environment.
What type of storage should you recommend?
Refer to the exhibit.
You create two snapshots of a thin provisioned base volume in an HPE Primera. One snapshot is read only and the other is read-write. A write occurs at the location shown in in the diagram.
Place the actions on the left into the order they are taken on the right.
Which StoreOnce Gen4 features are included with the system software without additional licenses? (Choose two.)
You have proposed a Primera array to a customer for primary storage. The customer currently has an older HPE 3PAR array and will continue to use it moving forward. The customer would like high availability configured.
Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)
A customer is purchasing an HPE MSA 2050 for a branch office. They will use it for critical data services. The customer is concerned that 64 snapshots will not be adequate as they grow.
What can be added to the array to address the customer’s concerns?