Oracle 1z0-580 Dumps

The Solaris 11 release in November 2011 only contains GNOME as a full desktop.

Incorrect:

Not A: The Common Desktop Environment (CDE) is a desktop environment for Unix and OpenVMS, based on the Motif widget toolkit. For a long period, it was the "classic" Unix desktop associated with commercial Unix workstations. After a long history as proprietary software, it was released as free software on 6 August 2012, under the GNU Lesser General Public License.

B:Example:Creating a Policy Around a Mission-Critical Port

The command below creates a policy around inbound HTTPS traffic on an HTTPS server so that HTTPS obtains dedicated NIC hardware and kernel TCP/IP resources. The name specified, https-1, can be used later to modify or delete the policy.

# flowadm add-flow -l bge0 -a transport=TCP,local_port=443 https-1

# flowadm show-flow -l bge0

FLOW LINK IP ADDR PROTO PORT RPORT DSFLD

https1 bge0 -- tcp 443 -- --

C:

Note:

*Flow Restrictions Per Zone

Within a zone, no two flows can have the same name. After adding a flow with the link specified, the link will not be required for display, modification, or deletion of the flow.

Incorrect:

Not A:Flow Properties

The following flow properties are supported. Note that the ability to set a given property to a given value depends on the driver and hardware.

maxbw

Sets the full duplex bandwidth for the flow. The bandwidth is specified as an integer with one of the scale suffixes(K, M, or G for Kbps, Mbps, and Gbps). If no units are specified, the input value will be read as Mbps. The default is no bandwidth limit.

priority

Sets the relative priority for the flow. The value can be given as one of the tokens high, medium, or low. The default is medium.

Not D:The following types of combinations of attributes are supported:

local_ip[/prefixlen]=address

remote_ip[/prefixlen]=address

transport={tcp|udp|sctp|icmp|icmpv6}

transport={tcp|udp|sctp},local_port=port

transport={tcp|udp|sctp},remote_port=port

dsfield=val[:dsfield_mask]

On a given link, the combinations above are mutually exclusive. An attempt to create flows of different combinations will fail.

Note:Flow Attributes

The flow operand that identify a flow in a flowadm command is a comma-separated list of one or more keyword, value pairs from the list below.

local_ip[/prefix_len]

remote_ip[/prefix_len]

transport={tcp|udp|sctp|icmp|icmpv6}

local_port

Identifies a service specified by the local port.

remote_port

Identifies a service specified by the remote port.

dsfield[:dsfield_mask]

NotE:

*flowstat

- report flow statistics

*The flowstat command reports run time statistics about user defined flows. flowadm show-flow provides the flow name information for this command.

*flowstat [-r | -t] [-i interval] [-l link] [flow]

This form of the command iteratively examines all flows and reports statistics. The output is sorted in descending order of flow utilization. If no flow is specified, the system displays statistics for all flows.

-r

Display receive-side statistics only. Includes bytes and packets received, drops, and so forth.

-t

Display transmit-side statistics only. Includes bytes and packets sent, drops, and so forth.

-i interval

Specify an interval in seconds at which statistics are refreshed. The default interval is one second.

-l link | flow]

Display statistics for all flows on the specified link or statistics for the specified flow.