HPE0-V15 Sample Questions Answers

Refer to the exhibit.

Drag the correct protocols from the left to the appropriate area on the topology on the right.

Refer to the exhibits.

A customer is growing rapidly, and they need to add as many drives as possible to their MSA 2052 array. You created the original configuration. How many drives can be added to the customer array? (Select two)

A customer requires a management solution that will provide email notifications if hardware errors occur on their servers. Which management solution provides this functionality?

Read the question, and then refer to the exhibit.

display int Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: UP Line protocol state: UP IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK SFP_PLUS 10Gbps-speed mode, full-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10 VLAN permitted: 10 Trunk port encapsulation: IEEE 802.1q Port priority: 0

An administrator connected a hypervisor to interface Ten-Gigabit Ethernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. These VLANs are configured to be tagged on the hypervisor.

The administrator found that all the virtual machines within VLAN 20 can communicate with each other, but not to any resource on VLAN 20 outside the hypervisor.

What must you do to resolve this issue?

Exhibit:

Which HPE ProLiant Server meets the customer's requirements?

Which HPE ProLiant Server meets the customer's requirements?

A customer needs to add storage capacity to a host In a remote branch office. They have limited IT resources, so the solution requires ease of integration at a low price point

Which HPE Storage family best meets these needs?

Why is SNMPv2c considered to be insecure?

You configured a port on an HPE FiexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs

interface Ten-GigabitEthernet 1/0/11 description server ESXiOl-ethl port link-type trunk port trunk permit vlan 50 port trunk permit vlan 2 port trunk pvid vlan 50

Given the configuration above, what should happen to any untagged traffic coming from the VMware ESXI host?

A customer needs to move data residing in one class of disks to a more appropriate class of disks based on data access patterns without manual intervention.

Which HPE MSA storage technology/feature will meet the customer requirement?