dumpspedia logo
An engineer must configure device aliases for a Cisco MDS 9000 Series Switches-based SAN fabric. The configuration must meet these requirements:
The engineer must be prompted before the changes are committed to the database
Pending changes must be explicitly displayed on the console.
Which command accomplishes this task?
An engineer must configure a named VSAN when the fabric interconnect is in Fibre Channel switch mode The VSAN must meet these requirements:
Named VSAN must be called " VSAN 10 " .
VSAN ID must be 10.
FCoE ID must be 20.
VSAN 10 must be attached to port 2 in slot 1.
Which command set configures a VSAN when the fabric interconnect is in Fibre Channel switch mode?
Refer to the exhibit. VLAN 10 Is experiencing delays and packet drops when the traffic is forwarded through the switch. The destination flow analyzer accepts traffic captures of not more than 30 seconds. Which configuration implements the traffic capture that meets the requirements?
Refer to the exhibit.
A network engineer must configure port E1/31- 32 to forward only storage server traffic of VLAN 200 on Cisco fabric interconnects A and B. Port E1/31- 32 is not reserved for any other traffic. Which port type must be configured to accomplish this goal?
Which Cisco Nexus Dashboard service distributes Cisco ACI network configuration policies and templates to different data centers?
An online retailer uses 200 cloud-hosted virtual machines (VMs). Currently, the configuration of each VM is performed manually. To support the growth strategy of the retailer, the retailer starts to automatically scale the VMs to meet demand and uses Ansible for configuration management. Which action must be performed in Ansible to meet the requirements before automation is performed?
Which LDAP rule must be used in Cisco UCS Manager to search for a user continuously down the tree hierarchy until the user is found?
An engineer must implement a VXLAN-based data center Interconnect. The long-distance transport provided by a service provider is IP-based, supports a maximum MTU of 1554 bytes, and does not support outbound traffic replication. Which action must be taken to build the data center Interconnect?
Service degradation is reported on a VM that is deployed on a Cisco UCS blade server. The traffic from the vNIC is required to SPAN in both directions to a packet analyzer that is connected to UCS-A slot 2 port 12. Which two commands are needed to complete the configuration? (Choose two.)
Refer to the exhibit. A network engineer must monitor the traffic from the server on VLAN 80.
All source traffic from the server must be captured on the monitoring device. Which configuration set meets these requirements?
Which two Cisco UCS components are upgraded when using Install Infrastructure Firmware? (Choose two.)
Refer to the exhibit. An engineer is configuring Cisco Data Center Network Manager to automate the provisioning of Cisco Nexus 9000 Series Switches. The engineer must configure user access for network engineers to permit device operations in Interface Manager. The solution must hide Admin and Config Menu items in Interface Manager Which two roles must be assigned to the network engineers to meet these requirements? (Choose two.)
Refer to the exhibits An engineer must implement a SPAN session that sends a copy of all VLAN 11 traffic on N5K_1 to the Traffic Capturing Device The configuration that is presented is already applied to the Cisco UCS Manager. Which additional action meets the objective?
Refer to the exhibit. Which Cisco MDS 9700 Series Switch module EPLDs are upgraded?
An engineer modifies the virtual port channel domain on a Cisco Nexus 9000 Series Switch using Session Manager Which two commands must the engineer use to confirm the configuration is valid and apply the configuration to the switch? (Choose two.)
An engineer must configure monitoring on a Cisco MDS 9000 Series Switch for a critical interface prone to sporadic data traffic surges. A Remote Network Monitoring alarm must be configured to sample the number of incoming octets on the critical interface every 300 seconds and must be triggered if the traffic exceeds a certain threshold. Which command must be run?
Which component is, by default, excluded from the host firmware package on a Cisco UCS B-Series Server?
Refer to the exhibit. SVR-A in EPG-A/BD-A fails to reach SVR-B in EPG-B/BD-B. Which two conditions should be verified to analyze the traffic between the two EPGs? (Choose two.)
Refer to the exhibit. A network administrator experiences these issues with the network:
• PC1 is experiencing a buffering problem for video applications.
• The servers that are connected to SW2 are experiencing packet drops when they connect to the Internet.
The engineer wants to configure the required traffic capture to investigate the issue further. Which configuration must be implemented to monitor the traffic?
An engineer is deploying a VXLAN EVPN environment for a customer. The customers environment suffers from a large amount of flooding related to hosts attempting to resolve the MAC to IP mapping on the network segment. Which feature prevents this issue from happening in the future?
The network engineer configured NetFlow to identify the issues affecting the communication between the two hosts. The network capture must meet these criteria:
•source IP 10.0.0.17
•destination IP 10.0.200.150
•Export to 10.100.1.15.
Drag and drop the code snippets from the right onto the blanks in the code to complete the NetFlow configuration.
A company plans to migrate some of its services to the cloud. The company does not want to manage or control the underlying cloud infrastructure. It also wants to maintain control over the deployment of its applications and configuration settings of the application-hosting environment. Which cloud service model meets these requirements?
An engineer is implementing VSAN 10 on multiple Cisco Nexus 5600 Series Switches and must ensure that the full zone set and active zone set are identical across the fabric. Which configuration must be implemented to meet this requirement?
An engineer is configuring a vHBA template in Cisco UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAU Traffic flows. Which two resources must be specified in the vHBA template? (Choose two)
Refer to the exhibit. A storage engineer must monitor the traffic from the file server to the FC analyzer. The file server and the database use the same storage array. Which configuration must be applied to the Cisco MDS 9000 Series Switch to accomplish this goal?
Which Cisco Nexus Dashboard feature analyzes flow telemetry data that is streamed from a Cisco Nexus 9000 Series Switch?
company is running a pair of cisco Nexus 7706 series switches as part of a data center segment. All network engineers have restricted read-Write access to the core switches. A network engineer must a new FCoE VLAN to allow traffic from services toward FCoE storage. Which set of actions must be taken to meet these requirements?
An engineer is implementing traffic monitoring for a server vNIC that is configured with fabric failover enabled. The requirement is for the traffic to be sent to an analyzer, even during a failure of one of the fabric interconnects. The analyzer is connected to unconfigured Ethernet ports on both fabric interconnects. Which configuration accomplishes this task?
Drag and drop the items from the left into the corresponding columns as a feature or capability of inter sight Managed Mode or UCS Manager Mode.
A SAN administrator receives reports about latency and response-time issues that impact various applications. The incidents have gradually increased in frequency and seventy and have reached a critical state Which DCNM configuration set identifies the source of the issues?
The network team needs permissions to access the Cisco UCS B-Series Servers via the Cisco UCS Manager GUI to configure the network and collect information about faults. The administrator wants to assign these permissions to the newly configured user called netops. Which set of tasks must the administrator perform to accomplish these goals?
Refer to the exhibit.
An engineer must enable interlace Eth1/2 when the interface Ethi/1 is shut down using EEM on a Cisco Nexus 9000 Series Switch. Which command set accomplishes this goal?
Refer to the exhibit. An engineer configures port security on a Cisco Nexus 9000 Series Switch. The requirement is to prevent any newly learned MAC addresses from forwarding traffic on the interface. Also, the already learned MAC addresses must not be affected by the changes. Which configuration meets these requirements?
Refer to the exhibit.
An engineer must connect a Cisco MDS Series Switch to a Cisco UCS domain using a port channel, but the link fails to activate. Which command activates the interface?
A customer deploys a media server to distribute streaming videos to network clients. The requirement is to allow the video feed to reach only requesting clients. The shared trees must not
propagate the video feed if no clients from that tree request it. To reduce configuration touchpoints, the solution must support the automatic discovery and announcement of RP-set
information. Each router in the network is responsible for selecting the RP. Which configuration set meets these requirements?
An engineer implements an environment with multiple traffic types on a consolidated I/O link between Cisco Nexus 9000 Series Switch and MDS 9000 Series Switch The configuration must meet these requirements:
The unified I/O link must support LAN and SAN traffic.
A single, multipurpose Ethernet transport must be used.
The configuration must discard MAC addresses that are not part of the current fabric.
The QoS markings must be preserved.
Which configuration set meets the requirements?
Drag and drop the keywords onto the URL request to collect all the subnets configured under tenant Production using a REST API. Not all options are used.
Which two configuration settings are available in the in the cisco UCS firmware Auto sync server policy?
Which Cisco UCS Manager XML encoded backup type must be used to back up user names, roles, and service profiles?
A network engineer must configure a power redundancy policy on a Cisco UCS C-Series Rack Server. The power redundancy must support two power sources being used to power the server. Which configuration should be applied to meet the requirement?
Which Cisco Nexus console line interface is shown in this output?
switch# dir bootflash:
25863680 Sep 23 12:02:16 2020 m9250-sSek9-kickstart-mz.8.2.1.bin
25864704 Sep 05 12:21:26 2021 m9250-s5ek9-kickstart-mz.8.2.1.bin
29869312 Apr 01 12:29:34 2021 m9250-sSek9-kickstart-mz.8.2.2.bin
25869312 Apr 12 01:55:22 2021 m9250-s5ek9-kickstart-mz.8.2.2.bin
25947136 Nov 09 13:41:43 2021 m9250-s5ek9-kickstart-mz.8.3.1.bin
29970176 Jan 17 14:10:47 2021 m9250-sSek9-kickstart-mz.8.3.2.bin
26126848 May 07 11:51:20 2021 m9250-s5ek9-kickstart-mz.8.4.1.bin
[output omitted]
Usage for bootflash://sup-local
1050153904658 bytes used
638636406560 bytes free
A customer asks an engineer to develop an orchestration solution to automate repetitive tasks. The customer operations team must integrate the tool with its existing automation framework. The customer asks for the tool to support these requirements:
• The customer ' s security requirements mandate the use of SSH transport.
• No extra software must be installed on the managed systems.
• The support staff has limited knowledge of scripting languages, so the solution must be easy to read and use declarative language.
Which solution meets these requirements?
Refer to the exhibit An engineer analyzes a Wireshark packet flow between a PC and a DHCP server What occurs in the packet flow?
A storage engineer must configure Cisco TrustSec Fibre Channel by using manual ESP mode on a Cisco MDS 9000 Series Switch. ESP mode must use the default message authentication and encryption method. Which configuration must the engineer apply on the switch to complete the configuration?
A Cisco IMC on the Cisco UCS C-Series Server must be configured with VLAN ID 110 and a priority value of 20. Which command set meets these requirements?
A server engineer must create a backup operation that will be used for the entire restore of the Cisco UCS system using a binary that includes a snapshot of the entre system. Which Backup type must be configured to achieve the objective?
An engineer must configure the RBAC role to perform these tasks In the Cisco UCS Manager:
Configure VLANs and VLAN groups.
Configure Ethernet Link Profile and LACP policy.
Specify the allowed range for virtual MAC addresses.
Configure SPAN Ethernet monitoring sessions.
Which set of permissions must be used to create a user role that accomplishes these roles?
A QoS policy on Cisco UCS must meet mese requirements:
No-drop class must be configured
Jumbo frames must be enabled without fragmentation.
Which configuration must be implemented to meet mese conditions?
An architect must select a scripting language for automating Cisco Nexus Series Switches and Cisco UCS Manager. The language must comply with these requirements:
•Can run in interactive mode for testing
•Can be run from different operating systems without changing code •Extensible with a diverse set of libraries
Which scripting language meets these requirements?
Refer to the exhibit A network engineer must use a Cisco on-box Python CLI to configure the BGP AS 65501 on Cisco Nexus 9000 Series Switch The output from the command must be returned as raw output instead of JSON format Which command set must be used to complete the configuration?
An engineer must perform an initial configuration of VXLAN Tunnel End-Point functionality on the Cisco Nexus 9000 Series platform All the necessary features are already enabled on the switch Which configuration set must be used to accomplish this goal?
A new user with access privileges in the Finance department moves to a new Admin department. The user must have access privileges to the Admin department data and applications inside the Cisco UCS Manager. Which set of changes must be implemented in Cisco UCS Central for the user to acquire the privileges?
Which feature of the Cisco Nexus Dashboard Insights uses Duo to reduce the risk of static passwords?
A network engineer deploys a cloud service for a customer The customer wants complete control over the underlying operating system data and application Which cloud service model must be used to accomplish this goal?
Refer to the exhibit.
Cisco Fabric Services is enabled in the network. Which type of IP address is used by the Cisco Fabric Services protocol?
An engineer must configure OSPFv2 connectivity between a pair of Cisco Nexus switches. The connection between the switches must meet these requirements:
Use unicast for updates.
Use decentralized communication of updates.
Full adjacency between switches.
Which configuration is needed to meet these requirements?
An engineer must back up the Cisco UCS Manager configuration to a remote server. The backup job must meet these requirements:
The backup must use the TCP protocol and be secure.
Client identification does not need to be verified before data is transmitted
The backup must contain the system configuration, including usernames, roles, and locales.
The operations team requires that the backup file is in a human-readable format.
Which set of configurations should the engineer use?
Refer to the exhibit. An engineer configures FCoE in a newly installed data center Which configuration must be applied to activate VSAN 100 on VFC 100?
Refer to the exhibit A VXLAN data center fabric has three hosts mapped to three different VLANs. Ingress and egress VTEPs perform Layer 2 and Layer 3 lookups VLAN 100 is mapped to VNI 1010 on Lead. Which set of actions allow communication between Host-1 and Host-2?
The Cisco Nexus 5600 Series Switch experiences occasional packet drops on interface ethernet 1/16. An engineer wants to implement a SPAN session to investigate the issue further. The network analyzer to which the packets must be directed is located on interface 1/3. The analyzer is limited on disk space available for traffic capture, so the Nexus switch should send only the relevant data. Which two command sets configure the SPAN session that meets these requirements? (Choose two.)
Which feature is supported with an In-Service Software Upgrade on a Cisco Nexus 9000 Series Switch?
What is the impact of a nondisruptive update on a Cisco MOS 9000 Series Modular Switch?
Drag and drop the telemetry concepts from the left onto their functions on the right.
An engineer must implement a disaster recovery policy for the Cisco UCS infrastructure. The solution must meet these criteria
The Recovery Point Objective must be 48 hours
The backup must use encrypted transmission
The Recovery Time Objective must be 4 hours
Which configuration set must be used in the scheduled backup to meet these requirements?
A Cisco Unified Computing System environment must be configured for a server that requites access to VLAN 30 for data and VLAN 40 for management The server must have failover capabilities The upstream connectivity will be provided by using a Cisco Nexus 9000 Series Switch. Which action must be taken to meet these requirements?
Refer to the exhibit.
Drag and drop the CLI commands from the bottom onto the boxes to complete the configuration needed to monitor the traffic flow that enters interface eth 3/1. Not all commands arc used.
Refer to the exhibit An engineer must create a Python script to convert
a Python dictionary called dic to a YAML format and add the output to a
file called switches.yml. Which line must be added to complete the script
to meet these requirements?
A customer data center experiences bandwidth contention that affects the servers connected to the NPV enabled switch The NPV switch is connected to the NPIV switch using two 10 Gb uplinks but the traffic originating front the connected hosts to the core switch exceeds the available bandwidth The engineers decided to add a third uplink to the NPV server to increase the available bandwidth Which set of commands must be used to provision the new uplink?
A company must security harden its Cisco UCS C-Series servers. The security policy requires all out-of-band management to meet these requirements
It must encrypt all traffic
It must use nondefault ports
It must provide private administrative sessions
Which Cisco IMC corrflguraton meets the requirements?
Refer to the exhibit. The PowerShell script uses cmdlet to create the MAC pool resource on the Cisco UCS Manager. Which command resolves the issue?
An engineer must configure a Fibre Channel port channel on a Cisco Nexus 9000 Series Switch. The configuration must meet these requirements:
A port-channel protocol negotiation is performed with the peer ports.
The trunk mode must be explicitly configured for the interfaces.
VSANs from 10 to 20 must be allowed.
Which command set configures the devices to meet the requirements?
Which storage solution allows multiple users to access files directly on a storage array over a LAN network?
The Cisco TACACS+ on a Cisco Nexus Series Switch must authenticate any user attempting to access the device and fail over to the local account if the TACACS+ server becomes unavailable. Which command accomplishes these goals?
Refer to the exhibit. A network engineer must configure an authentication solution for Cisco UCS with these conditions:
Two-factor authentication must be enabled for all UCS user authentication.
All AAA packets must be encrypted and use TCP port 49 to establish communication.
Which set of actions needs these requirements?
Refer to the exhibit.
An engineer prepared the configuration of OSPF in a text file named OSPF.txt. The engineer decided to remove all OSPF configurations. Which Python code must be added to accomplish this goal?
An engineer must use the Embedded Event Manager to monitor events that occur on a cisco Nexus 9000 series switch. An environment variable needs to be created so that several policies use the monitored events in in their actions. The external email server is represented by IP address 10.10.10.10. which command sets the environment variable?
A network engineer must determine the cooling requirements for a Cisco UCS C-Series Rack Server. The server with PCIe cards is configured with a fan configuration policy. Which configuration should be used for the fan policy of the server?
Which feature of Cisco Nexus Dashboard permits users to switch between site controllers of Cisco ACI?
Refer to the exhibit. Which Cisco MDS 9700 Series Switch module EPLDs are upgraded?
How does a modular Cisco Nexus 9000 Series Switch handle an in-service software (ISSU) upgrade as compared to a nonmodular switch?
An engineer must back up the Cisco UCS configuration. The backup job must meet these requirements:
• It must use the TCP protocol.
• Client identification must be verified before data is transmitted.
• The backup must contain all the system and logical configuration settings.
• The operations team requires that the backup file is in a human-readable format.
Which set of configurations must the engineer use?
A network engineer repeatedly saves a configuration on Catalyst switches to NVRAM using the write memory command. What action should be taken to implement the same action on Nexus switches?
Refer to the exhibit. A traffic collector virtual machine is installed inside the Cisco UCS server. The collector must monitor traffic that is received on G1/2 with ERSPAN. Which set of
actions must be taken to send the traffic to the traffic collector?
Refer to the exhibit. An engineer must configure a QoS policy that controls only vHBA traffic. Which policy must be used to meet this requirement?
An engineer must assign a device alias of Marketing to a Fibre Channel port that has a world wide name of 21:00:00:00:11:11:22:22 on a Cisco MDS 9000 Series Switch. Which two commands accomplish this goal? (Choose two.)
A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must enable analytics for NVMe on inter- faces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN environment, the data must be collected at regular intervals of 60 seconds from ports fc 1-12 and then for ports fc13-24 for the next 60 seconds. Ports in the range fc4/13-14 were already enabled for analytics. Which set of commands must be used to meet these requirements?
A network engineer must configure a Fibre Channel interface on the Cisco MDS 9000 Series Switch. The configuration must meet these requirements:
Which command set configures a Fibre Channel interface that meets these requirements?
Refer to the exhibit During a vPC peer switch reload, there is packet loss between the server and the router Which action must be taken to prevent this behavior during future reloads?
An engineer must configure remote authentication on a Cisco UCS system. The user password must be encrypted before it is sent to the authentication server. The company security policy requires the server to be based on an open standard. Drag and drop the UCS CLI AAA configuration commands from the left into the order in which they must be implemented on the right. Not all commands are used.
Refer to the exhibit. An engineer must configure NX-I to accept only packets that exist in the routing table with the 9.9.9.2/32 source IP address and that are reachable via interface Eth 1/1. Which attribute
to the ip verify unicast source command is needed to meet these requirements?
Refer to the exhibit. An engineer must Implement an Application Performance Monitoring (APM) for the production servers on the Cisco Nexus 93180 Series Switch-based Infrastructure in data center 1. The APM solution must meet these requirements:
It must copy all inbound and outbound production traffic.
It must support real-time telemetry.
Which configuration must be used on data center 1 switches to meet these objectives?
An engineer upgrades the bash on the Cisco Nexus 9000 Series Switch.
Which command must be used to complete the task?
Which two actions are needed to configure a single Cisco APIC controller for a Cisco ACI fabric for the first time? (Choose two.)
What is the impact of an electronic programmable logic device upgrade on a Cisco MDS 9000 Series Director Switch with dual supervisors?
An engineer must integrate Cisco ACI with VMware vCenter The visualization team configured the necessary port groups and assigned them to virtual machines through VMware vCenter The final port group configuration must be protected from being changed by Cisco APIC Which action accomplishes these goals ' ?
Which cloud deployment model uses two or more private or public clouds for a single organization using a technology to connect the two clouds together?
An engineer must monitor the traffic from the uplink Ethernet port. The traffic must be sent to an analyzer connected to interface Eth1/5 of the fabric interconnect. Which configuration must be set on the destination interface to meet this requirement?
An engineer must apply AAA configuration on a Cisco MDS 9000 Series Switch The solution must meet these conditions :
It must use a challenge-response authenticator protocol that uses MD5 hashing with an incrementally changing identifier
The RADIUS configuration must be automatically shared with other MDS switches in the environment
The RADIUS server is already defined. Which command set completes the configuration?
A)user naed
B)
C)
D)
Refer to the exhibit. An engineer is troubleshooting a connection issue from the virtual machine that is located on the Webserver 1 blade. The application team requested a packet capture for all traffic that is transferred to and from Webserver 1. The engineer confirmed that the host server vNIC1 has VLAN 300 assigned to It. Which action must be taken to capture the traffic?
A DevOps engineer must design a solution for a Cisco Unified Fabric solution to provision, monitor, and troubleshoot the network infrastructure for a data center based on Cisco Nexus
Series Switches. The solution must provide visibility and control of the unified data center. Which solution meets these requirements?
Refer to the exhibit. A Cisco Nexus Dashboard Fabric Controller (NDFC) manages the LAN network using the interface mgmt0. The management interface of the Nexus Dashboard is Layer 2 adjacent to the mgmt0 interface of the Nexus 9000 Series Switch. Which IP address must be allocated to the mgmt0 interface of the NDFC to manage the LAN network?
Refer to the exhibit An engineer must configure fabric binding on a Cisco MDS 9000 Series Switch to match the output Which fabric database configuration accomplishes this goal?
Drag and drop the network assurance concepts from the left onto the corresponding benefits on the right.
Refer to the exhibit. The gateway of Server 1 is in the VLAN 100 SVI on N5K-1 and the gateway of Server 2 is in the VLAN 200 SVI on N5K-2. Server 1 must connect to Server 2 using unidirectional traffic. Which action accomplishes this requirement?
A Cisco UCS C-Series server needs to be installed in a data center. The server must be managed by using Cisco UCS Manager with a single cable for management and data traffic. Which set of commands must be run on the server after a physical connection is established?
A)
B)
C)
D)
Which component is upgraded by using an EPLD upgrade on a Cisco Nexus 9000 Series Switch?
TESTED 25 Apr 2026
