Summer Special Sale - Limited Time 60% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 575363r9

Welcome To DumpsPedia

DES-6322 Sample Questions Answers

Questions 4

In addition to hardware monitoring, what is the purpose of the Dell PTAgent service on a VxRail node?

Options:

A.

Hardware discovery and firmware installation

B.

VxRail node discovery and software upgrades

C.

BOSS upgrade and firmware installation

D.

Hardware discovery and VxRail VIB installation

Buy Now
Questions 5

An implementation engineer is deploying a new VxRail cluster. What should they confirm before installing the hardware?

Options:

A.

Service laptop must be on the same IP network as the iDRACs

B.

At least 36 in (92 cm) clearance exists in front of and behind the cabinet

C.

Power distribution must support the power rating of a single node

D.

Single power zone must be used with adequate power cables

Buy Now
Questions 6

According to Dell best practices, which VxRail series can be deployed in either datacenters or remote locations?

Options:

A.

D Series

B.

V Series

C.

G Series

D.

E Series

Buy Now
Questions 7

What guideline should be followed when planning bandwidth between sites hosting VM objects and the witness nodes?

Options:

A.

1500 MTU on the VSAN vmkernel interface

B.

5 ms with a recommended minimum bandwidth of 10Gbps

C.

2 Mbps for every 1000 objects on the vSAN

D.

500 ms roundtrip (< 250 ms one way)

Buy Now
Questions 8

An implementation engineer logs in to the vSphere Client of a recently deployed VxRail cluster. They want to review the firmware versions on the VxRail nodes.

Which view should they use to gather this information?

Options:

A.

Hosts and Clusters > VxRail Host > Configure > VxRail > iDRAC Configuration

B.

Host and Clusters > VxRail Host > Monitor > VxRail > Physical View

C.

Hosts and Clusters > VxRail Cluster > Monitor > VxRail > Appliances

D.

Hosts and Clusters > VxRail Cluster > Configure > VxRail > System

Buy Now
Questions 9

What is a consideration when expanding a VxRail cluster? (Choose two.)

Options:

A.

Mixing of All-Flash and all-NVMe nodes in a cluster is not allowed

B.

Expanding a cluster to 64 nodes requires a 25 GbE network

C.

G Series clusters can be expanded only with G Series nodes

D.

1 GbE must be hybrid and single processor node type

Buy Now
Questions 10

From what environment must a network administrator run VxRail network validation?

Options:

A.

Windows PowerShell command prompt

B.

Same subnet as VxRail Management Network

C.

Top of Rack switches

D.

VxRail Deployment Wizard

Buy Now
Questions 11

What data protection option is included with VxRail?

Options:

A.

vSphere Replication NetWorker

B.

PowerProtect Software Data Domain Cloud Tier

C.

RecoverPoint for VM vSphere Replication

D.

RecoverPoint for VM Avamar

Buy Now
Questions 12

An implementation engineer is configuring External SRS. Where can they find the installation files for SRS VE?

Options:

A.

VxRail Support Matrix

B.

VxRail Manager

C.

SolVe Online

D.

Dell Support Page

Buy Now
Questions 13

Which VxRail Series is designed to support a VDI environment and requires a GPU card in each host?

Options:

A.

S Series

B.

V Series

C.

G Series

D.

P Series

Buy Now
Questions 14

A systems engineer needs to check the health of the nodes and the system VMs to prevent complications or failures during VxRail upgrades. Which tool must be used to perform the task?

Options:

A.

VxVerify

B.

CloudlQ

C.

SolVe Online

D.

VxRail ACE

Buy Now
Questions 15

Match each VxRail API request with the information to be retrieved.

Options:

Buy Now
Questions 16

Where can an administrator find steps to perform a manual verification of the customer network?

Options:

A.

Customer Simplified Form

B.

Dell EMC VxRail Network Planning Guide

C.

Pre-Engagement Questionnaire (PEQ)

D.

Dell Technologies SolVe Online

Buy Now
Questions 17

What is validated by running the Proactive Network Performance test in vCenter on a VxRail cluster?

Options:

A.

Latency and bandwidth measurement to the witness host

B.

Network configuration and performance for vSAN

C.

Network performance for virtual machines

D.

Latency measurement between DCs for Stretched Clusters

Buy Now
Questions 18

What Is a supported method for racking nodes for a new VxRail deployment?

Options:

A.

In the rack hosting the network equipment used to manage the iDRAC

B.

With PDUs connected to 120v single phase 5-amp electrical circuits

C.

Starting with node 1 at the top of the rack

D.

With server exhaust facing the cold aisle

Buy Now
Questions 19

In a VxRail Stretched Cluster deployment of 8 nodes on between sites?

Options:

A.

Primary to Witness site RTT: < 250 ms Secondary to Witness site RTT; < 250 ms Primary to Secondary site RTT: < 5 ms

B.

Primary to Witness site RTT: < 150 ms Secondary to Witness site RTT: < 150 ms Primary to Secondary site RTT: < 10 ms

C.

Primary to Witness site RTT: < 200 ms Secondary to Witness site RTT: < 200 ms Primary to Secondary site RTT: <: 5 ms

D.

Primary to Witness site RTT: < 200 ms Secondary to Witness site RTT < 200 ms Primary to Secondary site RTT: < 10 ms

Buy Now
Questions 20

What is the basis used for VMware vSAN licensing?

Options:

A.

TB capacity per node

B.

TB capacity per cluster

C.

Per disk group

D.

Per CPU socket

Buy Now
Questions 21

An implementation engineer is deploying a VxRail cluster with the VxRail Deployment Wizard Which user accounts must be defined for VxRail Manager?

Options:

A.

VxRail Manager root account

vCenter service account

B.

VxRail Manager root account

VxRail Manager service account

C.

VxRail Manager service account

vCenter service account

D.

vCenter root account

VxRail Manager service account

Buy Now
Questions 22

According to the VxRail PEQ Engagement Details worksheet, links to what resources should the SE send to the customer?

Options:

A.

VxRail vCenter Server Planning Guide

Network Validation Tool

B.

VxRail vCenter Server Planning Guide

VxRail Network Planning Guide

C.

VxRail QuickStart Guide

VxRail Network Planning Guide

D.

VxRail QuickStart Guide

Network Validation Tool

Buy Now
Questions 23

When preparing to generate an As-Built Configuration Report, it is determined that the VxRail Configuration JSON file was not saved from the Deployment Wizard. What actions must be taken to retrieve the JSON file?

Options:

A.

SSH to the VxRail Manager VM with the mystic user

SU to root

Go to the /opt/VxRail/config directory

SCP the initial-config json file to a local location

B.

Log in to vCenter with the vSphere Client with the vCenter Server Management user

Go to Monitor > VxRail > Last Configuration Data Sent

Use the Download option

C.

Open an FTP connection to the VxRail Manager VM with the mystic user

Go to the /var/lib/vmware-marvin directory

GET the config-initial json file

D.

Log in to vCenter with the vSphere Client with the vCenter Administration user

Go to Configure > VxRail > System

Use the Product Documentation option

Buy Now
Questions 24

An implementation engineer is in the validation phase of a VxRail deployment with two Dell EMC ToR switches. Which command should they run on each of the ToR switches to validate that Link Aggregation has been configured according to Dell best practices for VxRail node interfaces?

Options:

A.

show network-policy profile

B.

show interface status

C.

show port-channel summary

D.

show interface

Buy Now
Questions 25

How should an administrator manually validate the DNS readiness of a customer network?

Options:

A.

Run a traceroute to the DNS server

B.

Generate a Network PEQ

C.

Ping the default gateway of the management VLAN

D.

Run nslookup on server FQDN and IP

Buy Now
Questions 26

A VxRail E560F model was delivered six months ago and is now scheduled to be installed with the target code. What is the correct order of steps to complete this task?

Options:

Buy Now
Questions 27

What is validated by running the Proactive VM Creation test in vCenter on a VxRail cluster?

Options:

A.

vSAN operates successfully

B.

Network firewalls are configured correctly

C.

vSAN has sufficient storage capacity

D.

Network performance is sufficient

Buy Now
Questions 28

An implementation engineer is deploying a new VxRail cluster What should they confirm before installing the hardware?

Options:

A.

At least 24 in (61 cm) of clearance exists in front of and behind the cabinet

B.

Redundant power zones exist with adequate power cables

C.

Power distribution supports only the power rating of a single node

D.

Service laptop is on the same IP network as the iDRACs

Buy Now
Questions 29

An implementation engineer is expanding an existing VxRail S Series cluster with an additional node. The version of the node is not at the current cluster level but is compatible.

What procedure would result in the quickest node addition?

Options:

A.

RASR Factory Image Upgrade

B.

Factory Reset

C.

VxRail Node Imaging Management

D.

Compute node expansion

Buy Now
Questions 30

A systems engineer needs to ensure that the VxRail system is healthy and any issues found are addressed prior to starting an upgrade process. Where in the vSphere Client can they review alarms and overall vSAN health?

Options:

A.

Triggered Alarms > Issues and Alarms > All issues

Triggered Alarams > vSAN > Skyline Health

B.

Monitor > All Issues > Issues and Alarms

Monitor > vSAN > Health

C.

Triggered Alarms > All Issues > Issues and Alarms

Triggered Alarms > vSAN > Health

D.

Monitor > Issues and Alarms > All issues

Monitor > vSAN > Skyline Health

Buy Now
Questions 31

A systems engineer is deploying a VxRail cluster. They want to ensure that configuration issues can be avoided when expanding this cluster.

Which actions need to be performed?

Options:

A.

Verify VxRail nodes are racked and connected to the ToR switches

Validate the network environment

B.

Validate that no pending and unfinished jobs are running on the servers

Verify that the server and storage components are working properly

C.

Validate that the latest updates and patches are installed in the system

Validate that no pending and unfinished jobs are running on the servers

D.

Verify the configuration settings initially captured in PEQ

Validate the storage environment

Buy Now
Exam Code: DES-6322
Exam Name: Specialist - Implementation Engineer-VxRail Exam
Last Update: Jun 19, 2024
Questions: 105
$64  $159.99
$48  $119.99
$40  $99.99
buy now DES-6322