(single) According to the provisions of the H.248 protocol, what type of terminal does the telephone terminal occupy when it goes off-hook?
(single) How many ADSL2+&POTS access services are provided by the MA5600T ADSL2+&POTS service board H80BCAME.
(single) Is the following description correct? The administrator can maintain and manage the UA5000 through the outband network management or inband network management.
In the GPON network, what management protocols are running between the OLT and the ONT?
(single) Is the following description correct? The MA5680T supports the template mode and the discrete configuration mode to configure the FTTH service. In the template mode configuration, the ont-profile add command is used to configure the ONT.
(single) What state is the RUN light when the MA5600 SCU main control board starts loading?
(multiple) When performing maintenance on the MA5600T system, what can I view by using the display version command?
(single) Is the following description correct? Version rollback generally consists of three steps: 1. Load the original version of the package file; 2. Load the original version of the database backed up before the upgrade; 3. Reset the system.
(single) What technology does the GPON system provide for the original CATV service?
(single) Regarding the MIB statement, which of the following descriptions is incorrect?
(single) Which is the default read community word and write community word for SNMP V2?
In the access network technology, which of the following access methods can provide the highest access bandwidth?
(single) Regarding the MA5600T/MA5680T Ethernet link aggregation, which of the following statements is wrong?
(multiple) The MA5680T uses the template to configure the GPON ONT template. What are the templates to be configured?
(single) What is the statement that the GPON network is incorrectly protected against Type B?
(single) When IPTV services are deployed on the MA5600T, the IPTV service quality is betterguaranteed. Which of the following services has the highest QOS priority configured?
(single) According to the IEEE 802.1Q standard, where is the VLAN identification field inthe Ethernet frame?
(multiple) Which of the following reasons may cause a voice user to pick up the phone without a dial tone?
(single) Which isthe next generation development prospect of the access network?
(single) Which of the following descriptions is incorrect when performing an optical interface average transmit optical power test?
(single) Is the following description correct? ONT call emulation refers to the use of the ONT test module instead of the user's phone for call testing. When the ONT POTS user cannot provide voice services, the ONT call emulation test is performed remotely through the OLT command line to help the user diagnose whether the POTS user call of the ONT is normal. ONT can be offline when performing ONT call sim-ulation
(single) When conducting FTTx networking and data planning, consider user security. Which of the following measures can prevent user-to-user attacks?
(single) In the EPON network, which parameter is used to filter the downlink data on the ONU?
(single) What are the maximum split ratios supported by MA5680T H801GPBC and H802GPBD?
(single) Which of the following symbols is used to indicate all terminals in the H.248 protocol?
(single) When the MA5600T/MA5603T device needs to be maintained andmanaged locally, you can log in to the system through the local serial port. Which interface is the RS-232 serial cable RJ-45 network port connector connected to?
(multiple) IPMB is the broadband control board of the UA5000. What are itsmain functions?
(single) Which of the following H.248 protocol message types can be initiated by the MG?
(single) In the MA5600, which of the following boards does not support the "board reset" operation?
(single) Is the following description correct? The UA5000 is connected to the lanswitch through the GE. The working mode of the two ports can be auto-negotiation mode and the other mode is mandatory.
(single) Is the following description correct? Devices in the ODN network require power to operate.
(single) What kind of remoteacceptance function does the MA5600T/MA5680T still support?
(multiple) command. What are the correct meanings of the three points in ./.profile?
(multiple) What do I need toconfigure when adding the ont-lineprofile to the MA5680T?
(single) The MA5600 main control board (SCU) is restarted repeatedly. What are the reasons for the impossible?
(multiple) When the UA5000 is configured with the H.248 protocol and the softswitch, which of the following parameters must be consistent?