Labour Day Sale - Limited Time 60% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 575363r9

Welcome To DumpsPedia
  1. Home
  2. Huawei
  3. HCIP-Access
  4. H35-210_V2.5
  5. HCIA-Access V2.5 Exam Questions and Answers

H35-210_V2.5 Sample Questions Answers

Questions 4

When the MA5600 SCU main control board starts to load, what is the status of the RUN light?

Options:

A.

1 second on and 1 second off, periodic flashing

B.

0.25 second on, 0.25 second off, periodic flashing

C.

0.5 seconds on and 0.5 seconds off, flashing periodically

D.

2 seconds on and 2 seconds off, periodic flashing

Buy Now
Questions 5

Is the following description correct? The cells transmitted in the ATM network have two priority levels, which are distinguished by the CLP bit in the cell header. CLP=1 means high priority, and CLP=0 means low priority.

Options:

A.

True

B.

False

Buy Now
Questions 6

Which of the following statements about ONT tcont is incorrect?

Options:

A.

One ONU/ONT can contain multiple T-CONTs

B.

tcont 1 generally carries OMCI channels

C.

Uplink bandwidth is divided based on T-CONT, and different services use different T-CONTs

D.

The GEM port is used as a service channel. A GEM port can carry one or more services in the flow

Buy Now
Questions 7

Which one of the following descriptions of MA5616 is wrong?

Options:

A.

Support ADSL, VDSL, POTs access

B.

Support AC/DC input

C.

Support 4 business slots

D.

Uplink only supports GPON interface

Buy Now
Questions 8

Is the following description correct? In a GPON network, the ONU ID must be unique under a PON port.

Options:

A.

True

B.

False

Buy Now
Questions 9

What is the difference between alarm shielding and alarm suppression?

Options:

A.

When setting the alarm shielding function, the network element will still report the alarm, but the network management will not receive it; when the alarm suppression is set, the network element will no longer report the alarm

B.

When the alarm shielding function is set, the network element will no longer report the alarm; when the alarm suppression is set, the network element will still report the alarm, but the network manager will not receive it.

C.

When setting the alarm shielding function, the network element does any processing.

D.

There is no difference

Buy Now
Questions 10

Is the following description correct? There are no restrictions on the multicast program groups that MA5600T can configure.

Options:

A.

True

B.

False

Buy Now
Questions 11

Is the following description correct? In the EPON network, the gemport is used to carry the service flow.

Options:

A.

True

B.

False

Buy Now
Questions 12

IPMB is the broadband control board of UA5000. What are its main functions?

Options:

A.

Used to converge and process broadband services (ADSL, VDSL, SHDSL, LAN)

B.

Forward the VoIP service of the PVM single board, and realize the IP uplink through the FE or GE interface.

C.

Provide broadband switching resources, have dual-system hot backup function, and support active/standby switchover.

D.

Supports multicast services and can provide dedicated multicast channels.

Buy Now
Questions 13

Is the following description correct? MA5612 supports RF (Radio Frequency) over PON service access.

Options:

A.

True

B.

False

Buy Now
Questions 14

In the GPON network, which of the following is the role of DBA?

Options:

A.

It can improve the uplink bandwidth utilization of the PON port

B.

It can improve the bandwidth utilization of the downstream line of the PON port

C.

More ONUs can be added to the PON port

D.

Increased the upstream bandwidth of the PON port

Buy Now
Questions 15

Which of the following commands is used to query whether all the boards in the MA5600T/MA5680T 0 frame are operating normally?

Options:

A.

display board 0

B.

display frame info 0

C.

display board info 0

D.

display frame info 0/0

Buy Now
Questions 16

Regarding the description of UA5000, which of the following statements is wrong?

Options:

A.

UA5000 adopts the same hardware platform and supports the integration of PSTN, NGN, IMS and FTTx.

B.

UA5000 supports various traditional private line services under TDM/PSTN.

C.

UA5000 supports ADSL2+ service access.

D.

The UA5000 does not support VDSL2 service access temporarily.

Buy Now
Questions 17

Is the following description correct? The VPI/VCI of the ATM cell has only local importance, and the VPI/VCI value of each node in the transmission process can be changed.

Options:

A.

True

B.

False

Buy Now
Questions 18

Is the following description correct? ONT loading on MA5600T/MA5680T GPBC/GPBD is parallel on-board, and supports parallel loading of 256 ONTs at the same time.

Options:

A.

True

B.

False

Buy Now
Questions 19

Which of the following commands is used to close the main server of Sybase System?

Options:

A.

shutdown SYS_MAIN

B.

shutdown SYS

C.

shutdown

D.

Shutdown

Buy Now
Questions 20

What is the number of ADSL2+ subbands?

Options:

A.

256

B.

512

C.

128

D.

384

Buy Now
Questions 21

Is the following description correct? 1483B encapsulates MAC data frames on AAL5, and 1483R encapsulates IP data frames on AAL5.

Options:

A.

True

B.

False

Buy Now
Questions 22

Is the following description correct? MA5680T supports template mode and discrete configuration mode to configure FTTH services. In template mode configuration, use the ont-profile add command to configure the ONT.

Options:

A.

True

B.

False

Buy Now
Questions 23

Which command does the MA5600T use to confirm the auto-discovered board?

Options:

A.

board add

B.

board confirm

C.

board add and board confirm

D.

None of the above

Buy Now
Questions 24

Is the following description correct? It is impossible for a route in the routing table to have a mask of0.0.0.0Routing items.

Options:

A.

True

B.

False

Buy Now
Questions 25

Is the following description correct? ICMPIs a link layer protocol,ICMPThe message is triggered by the physical layer, and then byIPLayer or higher layer protocol to respond.

Options:

A.

True

B.

False

Buy Now
Questions 26

When locating ADSL faults, what reasons may cause ADSL Modem to fail to activate?

Options:

A.

Board failure or port failure

B.

Line problem, or MODEM failure

C.

Line activation template configuration error

D.

All of the above are possible

Buy Now
Questions 27

Which of the following is not an ONT product?

Options:

A.

HG510V

B.

HG8010

C.

HG8245

D.

HG8247

Buy Now
Questions 28

According to the ITU-T G.984.x series of standards, what are the upstream and downstream bandwidths of GPON?

Options:

A.

2.5Gbps/2.5Gbps

B.

1.25Gbps/2.5Gbps

C.

1.25Gbps/1.25Gbps

D.

2.5Gbps/1.25Gbps

Buy Now
Questions 29

Is the following description correct? The link layer defines electrical and mechanical processes and functions to activate, maintain, and remove lines when the systems at both ends are connected.

Options:

A.

True

B.

False

Buy Now
Questions 30

When other SNMP parameters are configured correctly, how to configure the trap source address of the device to ensure that the network manager can receive device alarms normally?

Options:

A.

The trap source address is set to 127.0.0.1

B.

The trap source address is set to the loopback address

C.

The trap source address is set to the address used by the network manager to add the device

D.

All of the above.

Buy Now
Questions 31

How to confirm the ip address of the Sybase database server during the installation of the network management system?

Options:

A.

# ifconfig -a

B.

# cat /opt/sybase/interfaces

C.

# cat /etc/hosts

D.

# less /etc/hosts

Buy Now
Questions 32

What is the maximum transmission distance of SHDSL?

Options:

A.

1.5KM

B.

6KM

C.

10KM

D.

20KM

Buy Now
Questions 33

command... What is the correct description of the three points in ./.profile?

Options:

A.

The first point. Means execution, same as sh

B.

The second point. Connected to the back /, ./ indicates the current directory

C.

The third point. Connected to the previous /, which means the root directory

D.

The third point. Before profile, the entire .profile is a file name, which means a hidden file

Buy Now
Questions 34

HG8245 product can be used in which of the following scenarios?

Options:

A.

Outdoor type

B.

Home user type

C.

SBU business user type

D.

MINI-DSLAM

Buy Now
Questions 35

What services does TCONT 0 generally run in ONT?

Options:

A.

IPTV

B.

VoIP

C.

Internet

D.

OMCI

Buy Now
Questions 36

What is the attenuation of the 1:2 splitter?

Options:

A.

5db

B.

8db

C.

3db

D.

13db

Buy Now
Questions 37

Regarding MA5600 Super Vlan and Sub Vlan, which of the following descriptions are correct?

Options:

A.

Super VLAN is different from VLAN in the usual sense. It is just a Layer 3 interface and does not contain physical ports.

B.

Super VLAN is mainly used to save IP addresses

C.

Sub VLAN only contains physical ports, and a three-layer VLAN virtual interface can be established.

D.

Sub VLAN types can be: Smart VLAN, MUX VLAN, Standard VLAN.

Buy Now
Questions 38

Is the following description correct? When MA5680T sets PQ+WRR, priority 0-7 corresponds to the following 10 20 30 0 20 20 0.

Options:

A.

True

B.

False

Buy Now
Questions 39

Which of the following statements about ATM network VP and VC is correct?

Options:

A.

A VP can include multiple VCs;

B.

A VC can include multiple VPs;

C.

VPI occupies the same number of bits in all cells, and the same is true for VCI;

D.

There is no logical connection between VP and VC.

Buy Now
Questions 40

Regarding the ADSL rate limit in the UA5000, which of the following statements is incorrect?

Options:

A.

ADSL rate limit can use port rate limit or PVC rate limit.

B.

Set the PVC UPC switch to ON when using port speed limit.

C.

Set the PVC UPC switch to ON when using PVC speed limit.

D.

Port speed limit is to limit the flow through the maximum uplink and downlink speed set when the line template is configured.

Buy Now
Questions 41

Is the following description correct? When the MA5600T MG interface communicates with the MGC through the H.248 protocol, the H.248 protocol version configuration that the MG interface starts to negotiate may be inconsistent with the MGC side.

Options:

A.

True

B.

False

Buy Now
Questions 42

What is the maximum number of ADSL2+ users provided by the MA5600 single frame?

Options:

A.

216

B.

448

C.

512

D.

896

Buy Now
Questions 43

10BASE-TRefers to which medium is defined?

Options:

A.

Thick coaxial cable

B.

Thin coaxial cable

C.

Twisted pair

D.

optical fiber

Buy Now
Questions 44

Is the following description correct? PVM manages and controls the business single board in the UA5000 chassis, and can also send tones and collect numbers to realize the V5 protocol and H．248/MGCP protocol processing.

Options:

A.

True

B.

False

Buy Now
Exam Code: H35-210_V2.5
Exam Name: HCIA-Access V2.5 Exam
Last Update: Apr 18, 2024
Questions: 299
$64  $159.99
$48  $119.99
$40  $99.99
buy now H35-210_V2.5