DOD is the ratio of discharge battery capacity to the rated battery capacity, expressed as a percentage.
For NetCol5000-A installation, the required time of preserving positive pressure is ( ) hours.
When load rate is low and stable, partial power modules of UPS could enter into hibernation, the remaining power modules undertake the larger loads, which improves system efficiency.
In teamwork topology diagram, a device with green frame indicates the device itself, a non-green frame indicates the other device in a group.
Before installing the indoor unit of NetCol5000-A, we should remove the sheet metals from the compressor.
The () is used to urgently start gas fire extinguishing equipment in a case of fire
In the water-side free cooling solution, cold water can be transported directly from the cooling tower to chilled water air conditioner.
Whether the water distribution unit is equipped or not is based on installation scenarios
After the hot backup function is enabled for the NetCol5000-C, all the unit is settled as running unit.
In the FusionModule1000, all surface-mounted fire control cables are rounded through metal hoses to prevent damage in case of fire.
When two UPS5000-E share battery strings, the battery capacity of each UPS should be set to the total capacity of battery strings.
The power indicator of the gas fire extinguishing controller is on and the alarm indicator is off indicating that the gas fire extinguishing controller is working properly.
After installing a top air outlet component for the UPS5000, need to set enabled for the top air outlet component on LCD
To compensate the capacity loss due to battery self-discharge, battery needs to do
The default user name of ECC800 is admin, and admin has permission to operate on the ECC800 WebUI.