H13-624_V5.5 Sample Questions Answers

The question addresses the configuration process for storage pools in Huawei OceanStor Dorado 18000 series systems. The *HCIP-Storage V5.5 Training Material (Module 4: Storage Design and Implementation)* clarifies: “To create storage pools, an engineer configures the physical disks or disk domains, which serve as the foundation for storage resources. LUNs and LUN groups are created after the storage pool is established, as LUNs are logical divisions of the pool’s capacity. Mapping LUN groups to host groups is a subsequent step to enable host access.” The statement in the question incorrectly suggests that LUNs, LUN groups, and mappings must be configured before creating storage pools, which reverses the actual process. Storage pools are a prerequisite for LUN creation, not the other way around, making the statement false.

SmartDedupe and SmartCompression are data reduction technologies in Huawei all-flash storage systems, such as OceanStor Dorado. The *HCIP-Storage V5.5 Training Material (Module 2: Flash Storage Technologies)* provides details:

- Option A: True. The material states: “Post-process compression involves writing data to storage media first, then reading it back for compression during idle periods.”

- Option B: True. The material confirms: “Inline deduplication divides data into blocks and calculates fingerprints to identify duplicates before writing.”

- Option C: False. The material clarifies: “Similarity-based deduplication, whether inline or background, requires dividing data into blocks to calculate fingerprints for similarity detection. Direct calculation without block division is not supported.” This makes the statement incorrect.

- Option D: True. The material notes: “Backup storage supports deduplication and compression for file systems to optimize space usage.”

Thus, option C is false.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* addresses performance issue demarcation: “If the latency on the compute side is significantly higher than on the storage side, the issue is likely outside the storage system, such as in the host, network, or application layer. If the storage side showed high latency (e.g., due to disk performance limits), it would be reflected in the STORAGE metrics.” The statement incorrectly attributes the issue to the storage system, as higher compute-side latency points to external factors, making it false.

A is false. Huawei documentation shows that OceanProtect Backup Storage supports deduplication and compression for both LUNs and file systems , not only for LUNs. The file system creation parameters explicitly include dedup_enabled and compression_enabled, and Huawei’s remote replication command reference also distinguishes both lun and file_system objects on supported models.

B is true, so it is not selected. Huawei’s product highlights state that OceanProtect uses backup data preprocessing and variable-length deduplication to improve logical capacity utilization and reduce TCO. That matches the statement.

C is false. Huawei states that OceanProtect uses a compression algorithm to compress data blocks into smaller data blocks, and then combines and writes them into disks . So the statement is wrong because compression is not simply followed by direct disk writing “without the need to perform any operations”; there is still a combining/write process after compression.

D is false. The statement mixes up fixed-length and content-defined chunking. For fixed-length deduplication, data is divided into blocks of a fixed size , whereas Huawei’s deduplication description emphasizes variable-length deduplication for data reduction. Saying that fixed-length deduplication divides data into fixed-size blocks based on content is incorrect.

This question addresses the process of adding DPC nodes in Huawei OceanStor Pacific systems. The *HCIP-Storage V5.5 Training Material (Module 3: Scale-Out Storage Technologies)* states: “To add DPC nodes, engineers can use DeviceManager to either manually add nodes by entering the management IP address or batch import nodes using a template. For manual addition, the management IP address is required to establish communication with the node. For batch import, a template must be downloaded, filled with node details, and uploaded to complete the process. Authentication is required in both modes to ensure secure node addition.” Let’s evaluate:

- Option A: False. Authentication is required for both manual and batch methods to validate node addition.

- Option B: True. The material confirms that the management IP address is required for manual node addition.

- Option C: False. The service IP address is not used for node addition; the management IP is needed.

- Option D: True. The material describes the batch import process as requiring a filled template upload.

Thus, options B and D are true.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* addresses host-side performance issues: “Outdated HBA drivers or insufficient concurrent HBAs can cause high host latency. Upgrading the HBA driver to the latest version ensures compatibility and performance. Adjusting the multipathing software’s load balancing algorithm to min-task optimizes I/O distribution across paths, reducing latency.” Let’s evaluate:

- Option A: Incorrect. HBA vendor software may query settings, but modifying concurrent HBAs is typically a firmware or driver-level task, not a standard management software function.

- Option B: Correct. Upgrading the HBA driver resolves compatibility and performance issues.

- Option C: Correct. The min-task algorithm balances I/O to minimize queuing delays.

- Option D: Incorrect. Cache prefetch policies affect storage-side performance, not host-side latency caused by HBA issues.

Thus, options B and C are the correct measures.

Huawei states that SmartCompression is suitable for data that is stored in the same format but contains little duplicate data , because it can save storage space and reduce costs.

The statement describes the reliability mechanism of Huawei’s scale-out storage systems, such as the OceanStor Pacific series, which employ cabinet-level security to enhance data availability. According to the *HCIP-Storage V5.5 Training Material (Module 3: Scale-Out Storage Technologies)*, scale-out storage systems use distributed architectures with N data blocks and M parity blocks stored across different cabinets to ensure redundancy. This design leverages erasure coding (EC) or similar mechanisms to tolerate faults. The material explicitly states: “In a scale-out storage system, N+M redundancy ensures that if up to M nodes or M disks fail, the system can reconstruct data without interruption or loss. However, if M cabinets fail, the system may lose the ability to access sufficient parity or data blocks, potentially interrupting services.” This confirms that the system can handle M node or disk failures without issue, but M cabinet failures may disrupt services due to the loss of distributed data or parity blocks. Therefore, the statement is true.

Huawei describes CPU core grouping and intelligent scheduling as improving processing performance by using core grouping and task partitioning, which aligns with resource isolation and lower latency , not cache prefetch across all LUNs.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* confirms: “The CLI command ‘show license_active’ is used to query details of activated licenses on Huawei flash storage systems, including license status and features enabled.” This makes the statement true, as the command is a standard tool for license management.

This statement is false . Huawei’s HyperClone documentation for deleting a clone CG states that the prerequisites include:

Health Status : Normal

Running Status : Unsynchronized or Normal ( support.huawei.com )

That means a clone CG can be deleted when its running status is "Unsynchronized" . Since the question says the engineer cannot delete the clone CG if the status is "DiffCopy reverse syncing" or "Unsynchronized" , the whole statement is incorrect because Unsynchronized is actually an allowed deletion status. ( support.huawei.com )

This statement is false . Huawei’s official OceanStor Dorado networking documentation states that quorum links must be established on GE, 10GE, or 25GE networks, but not on a Fibre Channel network . Therefore, it is incorrect to say that only 10GE can be used and that 25GE cannot be used .

Huawei’s SmartIO interface module documentation also explicitly states that 10 Gbit/s and 25 Gbit/s SmartIO interface modules can be used for HyperMetro quorum links . This directly confirms that 25GE is supported for quorum networking. Fibre Channel, however, is not supported for quorum links.

So the correct judgment is:

10GE → supported

25GE → supported

Fibre Channel → not supported

Hence, the overall statement is FALSE .

This question pertains to Quality of Service (QoS) features in Huawei OceanStor Pacific series storage systems. The *HCIP-Storage V5.5 Training Material (Module 3: Scale-Out Storage Technologies)* describes: “The OceanStor Pacific series supports the traffic shaping feature, which uses the classic token bucket algorithm to control the upper limit of traffic. When tokens in the bucket are insufficient, the system generates and adds tokens based on the operations per second (OPS) and bandwidth limits defined for the QoS control object.” Traffic shaping regulates data flow to prevent network congestion and ensure fair resource allocation, making it the correct feature name for this description.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* addresses hardware maintenance: “Before removing a faulty interface module, engineers must perform pre-operations, such as disabling the module via DeviceManager or CLI, ensuring no active I/O, and verifying redundancy to avoid service disruption. Direct removal without these steps can cause data loss or system errors.” The statement that the module can be removed without pre-operations is false, as these steps are mandatory.

Fibre Channel (FC) link exceptions in Huawei OceanStor Dorado 18000 systems are addressed in the *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)*: “Common causes of FC link exceptions include mismatched port rates between the host and switch, poorly connected or faulty optical fibers, and mismatched optical module rates between host and storage front-end ports.” Let’s evaluate:

- Option A: Correct. Mismatched FC port rates between the host and switch cause link failures.

- Option B: Correct. Faulty or loose optical fibers disrupt FC connectivity.

- Option C: Correct. Mismatched optical module rates between host and storage ports lead to link exceptions.

- Option D: Incorrect. IP address settings are relevant to iSCSI, not FC, which uses physical connections.

Thus, options A, B, and C are possible causes.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* details the low-level design (LLD) mode for Huawei scale-out storage: “In LLD mode, the Storage Deployment Tool (SDT) is used to plan nodes, networks, and clusters, generating a configuration file that guides subsequent installation and deployment.” The SDT ensures precise configuration for complex deployments, making it the correct tool for this task.

This statement is true . The NVM Express organization explains that NVMe over Fabrics (NVMe-oF) extends NVMe across fabric technologies such as Fibre Channel (FC) and RDMA-based transports , including RoCE, InfiniBand, and iWARP . It also notes support for TCP transport.

So the listed transports in the question — Fibre Channel, InfiniBand, RoCE v2, iWARP, and TCP — are valid NVMe-oF transport options

This statement is true . Huawei’s official HyperReplication configuration procedure states that before adding a remote device, you must create an authentication user on the remote device , and the role of that user must be “Remote device administrator.” After that, the engineer can use that account and password when adding the remote device .

Huawei’s documentation for adding a remote device explicitly says that the Remote Device Administrator account and password must be set to the authentication user created on the remote device . This directly matches the statement in the question.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* addresses Oracle database troubleshooting: “To locate Oracle alert log files, commands like ‘show parameter background_dump_dest’ (SQL*Plus) and ‘CRS_HOME/bin/diagcollection.sh’ (Oracle Grid Infrastructure) can query or collect log paths. The ‘ioscan -funC disk’ command (HP-UX) lists disk devices, which may indirectly help identify storage paths.” However, “db2support outpath -d db_name -c” is specific to IBM DB2 databases, not Oracle, making it irrelevant for querying Oracle alert log paths. Thus, option D cannot be used.

Huawei’s troubleshooting guidance for iSCSI Link Failure states that when the running status of an iSCSI host/front-end port is “Link down” and the link indicator is steady red or off , the fault is investigated as a physical/link-layer problem . Huawei’s documented possible causes include items such as cables between the host and storage being removed or damaged , optical module faults/incompatibility , or front-end port faults .

Therefore, A can be a possible cause because Huawei has a specific fault case for an incompatible optical module type causing the port to be unavailable. C can also be a possible cause because Huawei explicitly lists cables removed or damaged/loose as a cause of the link-down condition.

B and D are not possible causes of this specific exception. Incorrect IP settings on either the storage iSCSI front-end port or the application server service network port are network-layer configuration issues , but they do not cause the physical link indicator to turn steady red or the port running status to become Link down . A physical link-down alarm points to hardware, cabling, or optical-module problems instead.