dumpspedia logo
When deploying an Expressway Core and Expressway Edge cluster for mobile and remote access, which TLS verify subject name must be configured on the Expressway-E UC traversal zone?
Which service is available in a cloud-based deployment using Cisco Webex Messenger?
What is the last step for domain management in Cisco Webex Control Hub if an engineer adds users already signed in with the company domain?
Refer to the exhibit.
In an environment SIP devices are registered to CUCM and H.323 devices to VCS. What would be required to enable these calls to setup correctly?
A company is installing Cisco Collaboration infrastructure and one of the requirements is that they must be able to communicate with many external parties that are using H.323 and SIP. Internally they want to register the endpoints only on SIP.
Which functionality would describe the feature that needs to be enabled and where to achieve this?
Refer to the exhibit.
When a Jabber user attempts to connect from outside of the organization, the user enters the login information as "user@example.com" and receives the error "Cannot find your services Automatically". The engineer tries to resolve SRV records used by Jabber.
DNS A record "expressway-e.example.com" points to the Expressway-E IP and "cucm.example.com" points to the Cisco Unified Communications Manager.
Which change resolves the DNS problem?
An engineer is configuring Cisco Expressway-E and needs to implement toll fraud prevention. Which configuration meets this requirement?
A company has a single Expressway-E that exhibits high resource utilization. An engineer checks the logs and finds numerous fraudulent attempts from sip:200@cisco.com. Where must the engineer go to configure a call policy rule and block the desired URI?
In a Webex Video Mesh deployment, where do Cloud-registered Webex Teams clients and devices send signaling traffic for call setup?
What are two reasons why port 8443 is unreachable from the Internet to the Expressway-E? (Choose two.)
An engineer must enable the communication between two separate Expressway-C servers to allow inbound and outbound calling between different endpoints registered on each server. Which configuration must happen?
Which SIP media encryption mode is applied by default for newly created zones in the Cisco Expressway?
Refer to the exhibit. A manager asks an engineer to create a CSV file for the HTTP allow list on the Expressway deployment. The engineer wrote the script shown and uploaded it to the Expressway, but it is not being accepted. Which action resolves the issue?
Refer to the exhibit. Call policy rules on an Expressway-E prevent external callers from the internet from calling a VIP whose URI is vip@cisco.com. Which additional configuration setting is required for this call policy to function as intended?
Cisco Collaboration endpoints are exchanging encrypted signaling messages.
What is one major complication in implementing NAT ALG for voice and video devices?
Refer to the exhibit.
If the Webex Teams device cannot connect to Video Mesh Cluster-1 because it is busy, which media node does the Webex Teams device connect to next?
Which protocol and port are used for signaling between on-premises Cisco Webex Video Mesh Nodes and Cloud Media Services?
Which user management method uses the Webex Directory Connector to add and synchronize users to the Control Hub organization?
Where are voice calls handled in a Cisco Jabber hybrid cloud-based deployment with Cisco Webex Platform Service?
Which zone is required between Expressway-E and Expressway-C in Mobile and Remote Access deployments?
Refer to the exhibit.
Calls to locally registered endpoints are failing. At present, there are two endpoints
registered locally to this Expressway. An H.323 endpoint with an alias of “EndpointA” is registered, and a SIP endpoint with an alias of “EndpointB@pod1.local” is also registered. How is this issue resolved?
An administrator is enabling Mobile and Remote Access login for the Cisco UCM registration domain cisco.com. Phones are registered with a Cisco UCM phone security profile name of securephone.cisco.com. Which two subject alternative names must be configured? (Choose two.)
Refer to the exhibit.
An ISDN gateway is registered to Expressway-C with a prefix of 9 and/or it has a neighbor zone specified that routes calls starting with a 9.
Which value should be entered into the "Source" field to prevent toll fraud regardless at origin of the call?
What is the default file extension for saving Cisco Expressway-C backups when using the Google Chrome browser?
An employee has recently left an organization and a manager suspects that this employee may have made changes to the system that no one is aware of. Mobile and Remote Access registration is not working. Internal communications appear to be working, but no external system is able to register or call anywhere. While investigating this problem, it is discovered that no internal systems are able to call externally either. What is the TraversalZone missing that is causing this issue?
Refer to the exhibit.
An Expressway-C and Expressway-E are configured for B2B calling and the Expressway- E zone is set to TLS Verify Currently, calls do not reach the Expressway-C. The Traversal Client zone on the Expressway-C for B2B reports the information in the exhibit for the Peer 1 address.
Which action resolves this error?
An organization wants to enable a Cisco Webex connector to synchronize all employees automatically with Cisco Webex instead of using a manual list.
Where is the Webex Hybrid Directory Service configured?
An administrator is deploying Cisco Expressways for Mobile and Remote Access. The registration domain is “example.com”, and the Expressway-E FQDN is “expe.example.com”. Cisco Jabber clients on the internet cannot discover services via DNS lookup. Which SRV records must be configured in the public DNS to allow Service Discovery?
A call is sent by Cisco UCM to Expressway with a URI of 75080001@expc1a.pod8.test.lab. If (7508…)
@expc1a\.pod8\.test\.lab.* is the pattern string, what would be the replacement string of the transform in Expressway to re-write the call so that it becomes 75080001@conf.pod8.test.lab?
An Expressway Server has both network protocols (IPv4 and IPv6) enabled. Which two behaviors are correct? (Choose two.)
An engineer attempts to upload a server certificate to an Expressway-C server but receives an error when they click the upload button that says that the file is invalid. The engineer is advised that this happens because the certificate was signed incorrectly and is missing an attribute. What must the engineer do to upload the certificate?
An organization with a domain name of example.com.
Which two SRV records are valid for a SIP and H.323 communication? (Choose two.)
An engineer must review a new traversal zone that is not establishing a successful connection between Expressway-C and Expressway-E. When the event log page on the Expressway-E is reviewed, an authentication failure is found with the detail “user not found”. Which two actions must the engineer take to resolve the issue? (Choose two.)
An engineer must configure the zone to connect to an Expressway-E using Single NIC with NAT. The internal IP address is 192.168.10.63, and the NAT address is 203.0.113.5. What must the engineer configure on the Expressway-C to meet this requirement?
An administrator has been asked to configure Video Mesh signaling traffic to route through a proxy.
Which is an available proxy type in the Video Mesh node configuration to support this deployment model?
Refer to the exhibit. After hardening the Cisco Expressway, an engineer noticed this error in the logs HTTP error 429 "Too Many Requests,” and users report that authentication is not possible on more than two devices. What must the engineer increase to correct the issue?
An engineer is deploying an Expressway solution for the SIP domain Cisco.com. Which SRV record should be configured in the public DNS to support inbound B2B calls?
Refer to the exhibit.
Mobile Cisco Jabber cannot register with on-premises Cisco Unified Communications Manager using Mobile and Remote Access. Some logs were captured on Expressway Edge.
Which action corrects this problem?
Users in the Cisco Webex collaboration environment want to be able to use @webex when scheduling a Webex meeting from their Outlook client connected to Office365. Which configuration meets this requirement?
Refer to the exhibit.
When configuring a search rule that routes calls to a zone, what occurs when 13358 is dialed?
Refer to the exhibit. An engineer must configure a B2B traversal zone. Trusted certification authority and server certificates are uploaded to Cisco Expressway-C and Expressway-E servers. After the traversal zone configuration is completed in Expressway-C, the error message in the exhibit appears. What are the two reasons for the error? (Choose two.)
What is the benefit of configuring ICE, TURN and STUN in a Cisco Unified Collaboration environment?
Refer to the exhibit. A Cisco UCM cluster in mixed mode is integrated with Cisco Expressway-C for Mobile and Remote Access endpoint registration. TLS verify mode is enabled and self-signed certificates with the same common name for Cisco Tomcat and Cisco Call Manager are uploaded to Expressway-C. A Cisco Jabber client fails to register using secure SIP. Which two configurations are the cause of the issue? (Choose two.)
An engineer is deploying Mobile and Remote Access to allow external Cisco Jabber users to sign into a Cisco UCM cluster via Cisco Expressways. The users will sign-in in the format username@cisco.com. Contact photos for Jabber are hosted on a webserver with the FQDN of phonebook cisco.com. Which configuration must be completed to allow external Jabber users to see contact photos?
Refer to the exhibit. An administrator set up a B2B interop with a business partner running a Microsoft Lync environment and can successfully make outbound video calls to Jane.doe@ciscovideo.com. Inbound calls to paul.smith@ciscovoice.com, however, are failing. A quick SRV search returns the records in the exhibit. Which record must be modified to resolve this challenge?
Refer to the exhibit. A Cisco Webex device on an enterprise network has identified the given STUN round-trip delays in milliseconds to the enterprise Video Mesh clusters and two Webex Cloud Media clusters during the call setup. Which correct sequence of clusters is the client connecting to?
Refer to the exhibit.
Cisco Unified Communications Manager routes the call via the Webex Meetings route list and route group to the Video Mesh cluster Node#1 in the Video Mesh cluster is hosting the meeting and has reached full capacity, but other nodes in the cluster still have spare capacity.
What happens to the participant's call?
Which type of interface is required when the Cisco Expressway-E is located in a DMZ between two separate firewalls on separate network segments?
An engineer must fix broken SSH tunnels between Expressway-C (192.168.10.5) and Expressway-E (192.168.20.5). The engineer is advised that the packet capture shows the required packets for the SSH tunnels leaving the Expressway-C but not reaching the Expressway-E. Which firewall configuration must the engineer allow to resolve this issue?
What is a requirement when configuring the Cisco Webex Hybrid Message account for accessing the API of the Cisco UCM IM and Presence Service?
An Expressway-E is configured using a single NIC with NAT.
How must the Expressway-C traversal client zone be configured to connect to the Expressway-E?
A Cisco Webex Hybrid Video Mesh Node can be installed in the DMZ and on the internal network.
Which statement is true?
Refer to the exhibit.
Mobile and remote access is being added to an existing B2B deployment and is failing.
When the administrator looks at the alarms on the Expressway-C, the snippets are shown. Which configuration action should the administrator take to fix this issue?
Which zone is required on a B2B deployment between Expressway-C and Expressway-E?
A company has an on-premises Cisco collaboration cluster that contains Cisco UCM, IM and Presence, and Cisco Webex in the cloud. The company wants to integrate the on-premises infrastructure with Webex to enable interoperability with the Webex App. An engineer already configured the cluster in Cisco UCM, IM and Presence, and the organization in the Webex Control Hub. Which action must the engineer take to complete the configuration?
Cisco Expressways are being deployed for Mobile and Remote Access. The Expressway-E internal interface (LAN1) IP is 192.168.100.10/24, and the external interface (LAN2) IP is 172.16.100.10/24.
The Expressway-C IP is 192.168.20.10/24. The default gateway for each subnet is the first useable address. How must the Expressway-E be configured to allow proper routing to the internal and external networks?
TESTED 15 Oct 2025
