JN0-451 Sample Questions Answers

According to the Wi-Fi - Radio Modulation - TutorialsPoint document1, 64 QAM is a modulation method that will result in the highest theoretical data rates among the given options. 64 QAM uses both phase and amplitude modulation to encode six bits of information into each transmitted symbol. It can achieve up to 54 Mbps in the 802.11a and g systems.

References: https://www.tutorialspoint.com/wi-fi/wifi_radio_modulation.htm

If a customer wants to broadcast a WLAN at a certain time and day of the week, SSID scheduling should be configured

According to the SSID Scheduling - Mist document1, SSID scheduling is a feature that allows you to customize your WLAN by choosing the exact days and times to broadcast the SSID. This feature can be useful for scenarios where you want to limit the availability of a WLAN to a certain time and day of the week.

References: https://www.mist.com/documentation/ssid-scheduling/

If Bluetooth-only mobile client devices with an SDK-enabled app do not appear in the Mist GUI under Clients/App Clients even though they have Bluetooth enabled, it could be because the AP BLE radios do not hear the SDK-enabled client’s BLE beacons.

According to the Mist documentation1, Mist SDK is a software development kit that enables indoor location and proximity services using Mist’s virtual Bluetooth LE (vBLE) technology. The SDK allows mobile applications to communicate with Mist APs using BLE beacons that are transmitted by the client devices.

The devices with the SDK-enabled app have Bluetooth enabled, but they do not appear in the Mist GUI under Clients/App Clients because the AP BLE radios do not hear the SDK-enabled client’s BLE beacons. This could be due to various factors such as interference, distance, obstacles, or configuration issues that affect the BLE signal strength and quality.

The Wi-Fi Assurance SLE and classifier that would provide information about possible interference from a neighboring Wi-Fi network are Capacity and Wi-Fi Interference.

 According to the Cisco Catalyst 9800 Series Wireless Controller Software Configuration Guide1, RF templates are assigned to sites, which are logical groupings of devices based on physical location or other criteria. RF templates allow you to configure RF parameters such as channel width, transmit power, and data rates for multiple devices at once.

References: https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-2/config-guide/b_wl_17_2_cg/rf_templates.html

The impact of adding more SSIDs to a radio is beacon overhead.So,the correct answer is A.beacon overhead

According to the Juniper Mist Wireless Deployment Service Datasheet1, a configuration template at the organization level can be applied to a site group, not to an individual site. Therefore, there is no option to mention the site in the config template at the organization level.

References: https://www.juniper.net/us/en/products/cloud-services/juniper-mist-wireless-deployment-service-datasheet.html