Black Friday Special: Limited Time 70% Discount Offer! Use coupon code below to save on all exam bundles! - Ends in 0d 00h 00m 00s - Coupon code: black70

Welcome To DumpsPedia

NS0-094 Sample Questions Answers

Questions 4

In preparation for an upgrade to ONTAP 9.6P8 software, you have uploaded the ONTAP image 96P8_q_nodar_image.tgz onto your local web server with address 192.168.10.10.

Which is correct command syntax to download this image to the cluster image repository?

Options:

A.

ClusterA:: > storage firmware download –node local –package-url

http://192.168.10.10/96P8_q_nodar_image.tgz

B.

SP ClusterA–01 > cluster image package get –url

http://192.168.10.10/96P8_q_nodar_image.tgz

C.

ClusterA:: > cluster image package get –url

http://192.168.10.10/96P8_q_nodar_image.tgz

D.

ClusterA:: > cluster image package get –url

http: //netapp.com/ontap9/downloads/96P8_q_nodar_image.tgz

Buy Now
Questions 5

What happens when the command diskcopy is run from nodeshell?

Options:

A.

It pre-fails a drive in an aggregate and copies it to a spare.

B.

It performs a low-level copy of the disk to another disk.

C.

It copies the disk content to a specified volume.

D.

It triggers a RAID reconstruction of that disk.

Buy Now
Questions 6

Which three commands can be used to manually generate a kernel core file? (Choose three.)

Options:

A.

SP > system power cycle

B.

:: > reboot –node < node_name > –dump true

C.

:: > halt –dump true –node < node_name >

D.

:: > system node panic –node < node_name >

E.

SP > system core

Buy Now
Questions 7

Where is a kernel core file stored on a FAS9000 system that is running ONTAP 9.12.1 software?

Options:

A.

on the partner root aggregate

B.

on the root aggregate

C.

on the mailbox disk

D.

on the boot device

Buy Now
Questions 8

You have replaced the cluster backend switches on a 4-node NetApp ONTAP cluster with new switches. After the replacement, you realize that the system shows errors for the old switches that were removed:

8

You also notice that system switch ethernet show shows four switches, the two old switches and the two new switches.

What action will resolve the issue?

Options:

A.

Perform a reboot of the affected node using the storage failover takeover command.

B.

Delete the old switches from the database using the system switch ethernet delete command.

C.

Clear the health alert using the system health alert delete command.

D.

Reconnect the old switches and download a support bundle using the system switch ethernet log collect command.

Buy Now
Questions 9

During a new SVM deployment, all of the FC LIFs are showing an admin/oper status of up/down. The LIF extended status is Waiting for Link.

What is causing this status?

Options:

A.

The FC cables are bad.

B.

The sync-destination LIF is in switchover state.

C.

NPIV is disabled on the switch.

D.

The switch fabric is not configured.

Buy Now
Questions 10

A SAS connection is reporting a single PHY down.

What are the two most likely causes? (Choose two.)

Options:

A.

improperly seated cable

B.

outdated I/O module (IOM1 firmware

C.

defective cable

D.

an offline shelf in the stack

Buy Now
Questions 11

How do you set environment variables to factory settings?

Options:

A.

set-defaults

B.

unsetenv all

C.

setenv factory

D.

wipeconfig

Buy Now
Questions 12

Which two commands from the Service Processor can provide information about installed field replaceable units (FRUs)? (Choose two.)

Options:

A.

system fru list

B.

system fru show

C.

system sensors show

D.

system power status

Buy Now
Questions 13

What should be the first step taken after detecting a NetApp WAFL inconsistency?

Options:

A.

Run wafliron.

B.

Stabilize the system.

C.

Force offline the affected aggregate.

D.

Run a dump to null.

Buy Now
Questions 14

What is the recommended value for disk and CPU use when you plan an upgrade?

Options:

A.

less than 50%

B.

less than 90%

C.

less than 85%

D.

less than 70%

Buy Now
Questions 15

You have replaced a failed boot device. You perform boot_recovery and receive no errors. However, when the node reboots, it reports that it has no disks.

What are two possible causes? (Choose two.)

Options:

A.

The SAS cables were incorrectly reconnected after reinstalling the motherboard.

B.

The disks that are owned by this node have been marked as failed.

C.

The node is booting a lower version of ONTAP software than was last used.

D.

The interconnect is down.

Buy Now
Questions 16

Which two tools can be used to recover an inconsistent aggregate? (Choose two.)

Options:

A.

file check

B.

wafl_check

C.

wafl snapiron

D.

wafliron

Buy Now
Questions 17

A node has panicked with a PCI/NMI error. Giveback has not been performed.

Which two commands should you run to collect the logs to determine the cause? (Choose two.)

Options:

A.

pelog –a –g=2

B.

show pci –v

C.

rdfile /mroot/etc/log/SSRAM

D.

event log show

Buy Now
Questions 18

You have upgraded your cluster from ONTAP 9.5 software to ONTAP 9.7 software. After the upgrade, you notice that the upgrade causes issues. You decide to revert to ONTAP 9.5 software.

Which revert step is allowed?

Options:

A.

Revert to ONTAP 9.5 software with the netboot procedure.

B.

Revert from ONTAP 9.7 software to ONTAP 9.5 software by using the boot backup procedure.

C.

Revert directly from ONTAP 9.7 software to ONTAP 9.5 software.

D.

Revert from ONTAP 9.7 software to ONTAP 8.6 software and then to ONTAP 9.5 software.

Buy Now
Questions 19

Users are reporting slowness when accessing certain volumes with extremely high-performance requirements via NFSv3 on a four-node switched NetApp ONTAP cluster. Other volumes on the same cluster are behaving normally. Investigation reveals that there is a high amount of throughput recorded for the cluster LIFs.

What action enables you to determine which volumes are affected?

Options:

A.

View the active CIFS sessions on the cluster to determine the affected workloads.

B.

Check the NFS file locking lease period for the affected volumes.

C.

Review NFS export policies to ensure that client subnets are listed for the affected volumes.

D.

View the NFS connected client information and review the “Remote-Reqs” counter.

Buy Now
Questions 20

Which two ONTAP systems support both SSD and SAS disks? (Choose two.)

Options:

A.

AFF C190

B.

FAS2750

C.

AFF A220

D.

FAS8200

Buy Now
Questions 21

During an ONTAP upgrade, nodeA1 fails to boot. You notice that it is loading the previous version of ONTAP software. What step can be taken to boot the node successfully?

Options:

A.

From the loader prompt of nodeA1, use setenv GX_PRIMARY_KERNEL_URL to point to the correct version of ONTAP software.

B.

From the loader prompt of nodeA1, run boot_backup to run the correct version of ONTAP software.

C.

From the clustershell of the partner, run system node image modify to point to the correct version of ONTAP software.

D.

From the clustershell of nodeA1, run system node image modify to point to the correct version of ONTAP software.

Buy Now
Questions 22

When you plan an ONTAP upgrade, which NetApp tool generates a detailed upgrade plan?

Options:

A.

ONTAP System Manager

B.

Active IQ Unified Manager

C.

Upgrade Advisor

D.

Active IQ Config Avisor

Buy Now
Questions 23

Which two statements are correct when describing L1 and L2 Watch Dog Resets (WDR)? (Choose two.)

Options:

A.

L2 WDR requests creation of a core dump before reset.

B.

L1 WDR is initiated after 0.5 seconds from the event.

C.

L1 WDR performs a soft reset.

D.

L2 WDR is initiated after 2 seconds from the event.

Buy Now
Questions 24

What are two options to remove Failure Byte on disks that are marked as failed? (Choose two.)

Options:

A.

Power cycle the disk shelf.

B.

Reseat the disk.

C.

Update the disk firmware.

D.

Unfail the disk

Buy Now
Exam Code: NS0-094
Exam Name: NetApp Hardware Support Engineer Professional Exam
Last Update: Nov 18, 2026
Questions: 81

PDF + Testing Engine

$51.42 $171.4

Testing Engine

$38.57 $128.55

PDF (Q&A)

$42.85 $142.82