Category-7A-General-and-Household-Pest-Control Sample Questions Answers

Only the adult stage of a flea feeds on blood, typically from a host like a pet or human. Flea larvae feed on organic debris and flea feces (dried blood), not directly on blood. TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 7: Fleas) details this life cycle. Option B (adult and larva) is incorrect, as larvae do not feed on blood. Option C (egg and larva) is incorrect, as eggs are non-feeding, and larvae do not consume blood.

NJDEP regulations (N.J.A.C. 7:30-9.13) require that the specific date of pesticide application at multi-family residences be provided if requested by tenants and/or the contracting party (e.g., property manager). This ensures transparency for those directly affected by the application. Option A (contracting party only) is too restrictive, as tenants have a right to know. Option C (OPRA) refers to the Open Public Records Act, which is not relevant to this specific notification requirement.

Bottle or blow flies are known for their metallic green or blue color, which distinguishes them from other flies. TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 7: Flies) describes these flies as common in structures, often attracted to decaying organic matter. Option A (cluster flies) are dull grayish-brown and often found in attics. Option B (house flies) are gray with black stripes, not metallic.

Ants are identified by their elbowed antennae, which bend at an angle, and a narrow, pinched waist. TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 7: Ants) lists this as a key characteristic. Option B (wings of equal length) applies to termites, not ants (ant wings are unequal in length). Option C (no waist) also describes termites, not ants.

Pesticide resistance occurs when pests develop tolerance to a pesticide due to overuse. IPM strategies, as outlined in theGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 4: IPM), recommend using multiple components (e.g., rotating pesticide classes, incorporating non-chemical methods like sanitation or traps) to control pests and reduce resistance risk. Option A (routine spraying) increases resistance by overexposing pests to the same chemical. Option C (increased dosage) can exacerbate resistance and is not an IPM practice.

Lyme Disease is the most frequently reported vector-borne illness in the U.S., including New Jersey, transmitted by the blacklegged tick. TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 7: Ticks) highlights its prevalence, with thousands of cases reported annually. Option A (Rocky Mountain Spotted Fever) is less common. Option B (Tick Paralysis) is rare and not a disease but a condition caused by tick bites.

Yellow jackets are aggressive social wasps and are the most likely to sting, especially when their nest is disturbed. TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 7: Wasps) notes their defensive behavior. Option A (honeybee) can sting but typically only once, as they die after stinging. Option C (mud dauber) is a solitary wasp and less likely to sting unless provoked.

Disposing of rinsate (rinse water from cleaning equipment) or unused pesticide material improperly can lead to environmental contamination. NJDEP regulations (N.J.A.C. 7:30-9.12) and theGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 3: Pesticide Safety) prohibit disposal on the soil (which can contaminate groundwater) or into a drain or sewer (which can pollute water systems). Both methods are illegal and environmentally harmful, making Option C correct. Rinsate should be applied to a labeled site or disposed of at a designated facility.

The second most common cause of pesticide poisoning for applicators is inhalation, as pesticides can be inhaled as vapors, mists, or dusts during mixing or application, especially in enclosed spaces. TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 3: Pesticide Safety) notes that inhalation exposure often follows dermal exposure (the most common cause, see Question 18) in frequency. Option A (fire) is not a common cause of poisoning, though it poses other risks. Option C (dermal exposure) is the most common cause, not the second.

Earwigs are outdoor pests that enter structures, often hiding in debris near foundations. TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 7: Earwigs) recommends exterior treatment (e.g., perimeter spraying) combined with debris removal to eliminate harborage sites. Option A (fogging) is not a standard method for earwigs. Option B (interior baseboard spray) may be used but is less effective without addressing outdoor sources.

In New Jersey, a commercial pesticide applicator is defined as anyone applying pesticides as a service, whether for hire or as part of their job (N.J.A.C. 7:30-1.2). This includes both general use and restricted use pesticides (RUPs). A Category 7A applicator must be licensed to apply any pesticide, as their work may involve both types depending on the pest and situation. Option A is incorrect because it excludes RUPs, which applicators may need to use. Option B is incorrect because it excludes general use pesticides, which are commonly used in household pest control.

Norway rats leave dark, greasy smears along walls from body oils and a musty odor from their urine, as they travel along established runways. TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 8: Rodents) lists these as key signs of infestation. Option A (eggs) is incorrect, as rats are mammals and do not lay eggs. Option C (ceiling void nests) is more typical of squirrels or birds, not Norway rats, which nest in burrows or lower areas.

TEMPRID SC (a common pesticide for Category 7A) is labeled for outdoor tick control. The label specifies a rate of 0.54 fl. oz. per 1000 sq. ft. for outdoor perimeter applications, which aligns with theGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 5: Pesticide Application) for tick control. Option A is incorrect because Category 7A does cover outdoor tick treatments adjacent to structures (see Question 63). Option B (0.075% per 1000 sq. ft.) refers to a concentration rate for indoor applications, not the volume rate for outdoor use.

The first step in any pest control program, especially under IPM, is an inspection to identify the pest, assess the infestation’s extent, and determine contributing factors. TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 4: IPM) emphasizes that inspection guides the development of a targeted control strategy. Option A (pesticide application) should only occur after inspection and other methods are considered. Option C (alteration of the habitat) is a control method that follows inspection.

Category 7A (General and Household Pest Control) includes applying pesticides to control pests like ticks and fleas inside and outside structures, including turf and ornamental areas immediately adjacent to the structure (e.g., lawns or gardens). TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 1: Scope of Category 7A) confirms this scope. Option A is incorrect because bedbugs are indoor pests, and grubs require Category 3B (Turf Pest Control) certification. Option B is incorrect, as 7A applicators can treat outdoor areas for certain pests like ticks and fleas.

Power sprayers must be calibrated to ensure the correct amount of pesticide is applied, as application rates can vary due to wear, nozzle changes, or pressure adjustments. TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 5: Pesticide Application) stresses that applicators should check calibration regularly to ensure accuracy, especially for Category 7A applications. Option A is incorrect because factory calibration does not account for field conditions or equipment changes. Option C (annual calibration) is a good practice but not a strict requirement; the need for calibration depends on usage and equipment condition.

Silverfish are known to feed on starch materials like paper, books, and wallpaper, as well as starchy foods. TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 7: Silverfish) notes that they are common in damp areas and can damage household items containing starch or glue. Option A (grain) is more typical of pantry pests like weevils. Option B (wool or cotton) is associated with clothes moths, not silverfish.

Applying pesticides for roaches or flies inside a school building falls under Category 7A (General and Household Pest Control), which covers the management of pests like roaches, flies, and other household insects in structures, including schools. Additionally, because the application is in a school, Category 13 (School IPM) certification is required in New Jersey to comply with the School Integrated Pest Management Act (N.J.A.C. 7:30-13). Category 13 ensures applicators follow specific IPM protocols and notification requirements in educational settings. Option A (3B or 7B) is incorrect because 3B is for turf pest control, and 7B is for termites/wood-destroying insects, neither of which apply to roaches or flies. Option B (3A and 3B) involves ornamental and turf pest control, which is irrelevant here. Option D (7B) is also incorrect as it does not cover general pests like roaches or flies.

For single-family residences, NJDEP regulations (N.J.A.C. 7:30-9.13) require written notification to include the exact date of application to inform residents of when the treatment will occur. Option B (full pesticide label directions) is not required in the notification, though the label must be followed. Option C (name of the pesticide) is typically included in post-application notices but is not mandatory in the pre-application written notification.

For cracks and crevices, a handheld compressed air sprayer is recommended because it allows precise application of pesticide into small, hard-to-reach areas where pests like roaches orants hide. TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 5: Pesticide Application) notes that these sprayers are ideal for targeted treatments in household pest control. Option B (cold fogger) and Option C (thermal fogger) are used for larger areas or space treatments, not precise crack-and-crevice applications.

The blacklegged tick (Ixodes scapularis), also known as the deer tick, is the primary vector forLyme disease in New Jersey. TheGeneral Pest Management: Guide for Commercial Applicators - Category 7A(Chapter 7: Ticks) identifies this species as the main transmitter in the northeastern U.S. Option A (dog tick) transmits other diseases like Rocky Mountain Spotted Fever. Option B (lone star tick) is associated with other illnesses, not Lyme disease.