Pre-Winter Special Sale - Limited Time 60% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 575363r9

Welcome To DumpsPedia

201-01 Sample Questions Answers

Questions 4

Which of the following supports the largest number of Cascade analytics?

Options:

A.

Express

B.

Standard Profiler

C.

Enterprise Profiler

D.

B and C

E.

A, B, and C

Buy Now
Questions 5

What are some reports Cascade Profiler provides to benefit WAN management?

Options:

A.

WAN Optimization Benefits reports, Breakdown of business versus non-business application reports, QOS reports by interface and/or application.

B.

WAN Optimization of all TCP protocols with more specific optimization of over 50 TCP Applications.

C.

WAN reporting of TCP Protocols.

D.

QOS shaping, User-based policies that will block not compliant traffic, WAN optimization reporting.

Buy Now
Questions 6

When drilling down from a Cascade Profiler traffic report to analyze the underlying packets in Cascade Pilot, which of the following best describes the interaction between Cascade Profiler, Cascade Pilot, and the Cascade Shark appliance?

Options:

A.

A new capture job is created on the Cascade Shark appliance.

B.

A new trace clip is created on the Cascade Shark appliance, using the time frame that was specified for the Cascade Profiler traffic report, and including a filter for the IP addresses or TCP ports that the drill down was launched from.

C.

A new trace clip is created on the Cascade Shark appliance, using the timeframe that was specified for the Profiler traffic report.

D.

The underlying packets associated with the Cascade Profiler traffic report are downloaded to Wireshark.

E.

The underlying packets associated with the Cascade Profiler traffic report are saved as a PCAP file on the Cascade Shark appliance.

Buy Now
Questions 7

What syntax is used to define Host Groups within Cascade Profiler?

Options:

A.

Name followed by list of Ports

B.

Name followed by several Subnets

C.

Name followed by Subnet

D.

Subnet followed by name

E.

Name followed by Subnet followed by Port

Buy Now
Questions 8

A trace clip created with Cascade Pilot is:

Options:

A.

A packet capture (pcap) file that is open on the local file system for analysis by Cascade Pilot.

B.

A packet capture (pcap) file that is exported on to the Cascade Shark OS disk for analysis by Cascade Pilot.

C.

A capture job that is suspended or stopped.

D.

A time filter into a job trace.

Buy Now
Questions 9

Views on Cascade Pilot refer to:

Options:

A.

An optional module that is licensed separately and not available in the Cascade Pilot Personal Edition (PE) product.

B.

A module that automatically generates expert reports of traffic selection in PDF format.

C.

The source of packet traffic – either a device or a packet capture file.

D.

Network traffic analysis displays that can be applied to traffic.

Buy Now
Questions 10

In SteelCentral Portal, reports can be created in these ways:

Options:

A.

Use out of the box report templates

B.

Export any dashboard to PDF

C.

With a right-click operation

D.

All of the above

Buy Now
Questions 11

In the traffic reporting tabs on Cascade Profiler, each report-by option has a default template that controls content and formatting of the resulting report. Which of the following is controlled by the default template?

Options:

A.

Inclusion of a pie chart

B.

Inclusion of a flow list

C.

Data resolution (1 min, 15 min, 1 hr, etc.)

D.

Columns that are included in the summary table

E.

Sort order of the summary table

F.

All of the above

Buy Now
Questions 12

Which version(s) of SNMP alert can be sent from the Cascade Profiler?

Options:

A.

SNMPv1 Only

B.

SNMPv2 Only

C.

SNMPv1 and SNMPv2

D.

SNMPv1 and SNMPv3

Buy Now
Questions 13

What value does NetFlow provide? (Select 2)

Options:

A.

It is a cost effective way of collecting IP conversation details from existing routers in the network

B.

It is a packet capture technology that allows remote monitoring of packets in the network

C.

It is a logging protocol for security events

D.

It provides information about the number of bits and packets per protocol between each pair of IP Addresses across a device

E.

It provides details such as response time and application level transactions across the network

Buy Now
Questions 14

What are the types of content blocks available to view “Events” on the Cascade Profiler dashboard? (Select 2)

Options:

A.

Security Events

B.

Performance and Availability Events

C.

Current Events

D.

Unacknowledged Events

E.

Public Events

F.

Private Events

G.

Per User Events

Buy Now
Questions 15

In a Cascade deployment with Sensor and Profiler, what information does the Application Performance Policy report show? (Select 4)

Options:

A.

Number of connections per second

B.

Average Response time

C.

TCP resets

D.

CPU and memory utilization of server

E.

TCP retransmission

F.

Number of jumbo frames

Buy Now
Questions 16

Which of the following statements is true regarding SNMP polling and NTP syncing among Cascade components?

Options:

A.

Cascade Gateway’s poll Netflow sources via SNMP, while Cascade Profiler, Cascade Gateway and Cascade Sensor sync NTP from a common source.

B.

Cascade Profiler’s poll Netflow sources via SNMP, while Cascade Profiler, Cascade Gateway and Cascade Sensor sync NTP a common source.

C.

Cascade Profiler’s poll Netflow sources via SNMP, while Cascade Profiler is the NTP source for Cascade Gateways and Cascade Sensors.

D.

Cascade Gateway’s poll Netflow sources via SNMP, while Cascade Profiler is the NTP source for Cascade Gateways, Cascade Sensors and Cascade Sharks.

E.

SNMP polling is not supported in Cascade.

Buy Now
Questions 17

Which of the following are differences between the Cascade Sensor and the Cascade Shark appliances? (Select 2)

Options:

A.

Cascade Shark appliance can monitor 10GE interface traffic but Cascade Sensor cannot.

B.

Cascade Sensor can provide flow data to Cascade Profiler but Cascade Shark appliance cannot.

C.

Cascade Shark appliance has much higher write-to-disk rates than the Cascade Sensor and is the appropriate appliance when packet capture is the primary requirement.

D.

Cascade Sensor can recognize the application type by its DPI signature database but Cascade Shark appliance cannot.

Buy Now
Questions 18

Which of the following is the most likely reason that a newly added user cannot log in to SteelCentral Portal?

Options:

A.

There is a 30-minute waiting period before newly added users become active.

B.

The user is probably using an unsupported web browser.

C.

The user is probably lacking the Access permission.

D.

None of the above.

Buy Now
Questions 19

Which of the following can Flow Gateway not do?

Options:

A.

Roll remote devices via SNMP at the request of NetProfiler.

B.

Process up to tens of millions of raw flows per minute.

C.

Provide analysis of incoming flows and identify anomalies in traffic patterns.

D.

Selectively forward flows from original sources to third party colectors.

E.

Selectively forward flows from original sources to NetProfiler(s).

Buy Now
Questions 20

In the Cascade Profiler GUI, which of the following Host Group Types are available as default examples? (Select 2)

Options:

A.

ByLocation

B.

ByHostGroup

C.

ByPortsAndApplications

D.

ByFunction

E.

ByTimeZone

Buy Now
Questions 21

Which types of automated analytics are available on Cascade?

Options:

A.

Application Performance, Interface Performance, and Security.

B.

Application Performance, Application Availability, Interface Performance, and Interface Availability.

C.

Application Performance, and Interface Performance.

D.

Application Performance, Application Availability, Interface Performance, Interface Availability, Service Monitoring and Security.

Buy Now
Questions 22

Cascade Profiler flow logs can be stored on which of the following?

Options:

A.

SAN and Local Disk Storage

B.

SAN only

C.

Local Gateway-Storage

D.

Hard Drive and Ethernet or USB-attached NAS

E.

Local only

Buy Now
Questions 23

Riverbed SteelHead sends SteelFlow-Net to what devices? (Choose two.)

Options:

A.

AppResponse

B.

HP OpenView

C.

NetProfiler

D.

NetExpress

E.

Flow Gateway

Buy Now
Questions 24

Which technology can be used to determine that a TCP Reset has been sent from a server to client?

Options:

A.

Packet Collection Only

B.

Flow Collection Only

C.

SNMP Statistics Only

D.

Flow Collection or Packet Collection

E.

SNMP Statistics or Packet Collection

Buy Now
Questions 25

Within Cascade Pilot, how are views used to analyze a trace file? (Select 2)

Options:

A.

Drag the trace file on the View to apply the View.

B.

Right-click the View item and select "Apply with Filter".

C.

Drag a View on the trace file to apply the selected View.

D.

Select the View and the trace file, and double-click the trace file.

Buy Now
Questions 26

What signaling protocols are supported by AppResponse VoIP Monitoring Module? (Choose three.)

Options:

A.

MGCP

B.

SCCP

C.

H.248

D.

SIP

E.

H323

Buy Now
Questions 27

Some common protocols, which may be observed on a network with visibility tools, include:

Options:

A.

HTTP over TCP/80 and HTTPS over TCP/445

B.

HTTP over TCP/80 and HTTPS over TCP/443

C.

HTTP over TCP/443 and HTTPS over TCP/80

D.

HTTP over TCP/445 and HTTPS over TCP/80

E.

HTTP over TCP/88 and HTTP over TCP/444

Buy Now
Questions 28

The exhibit includes a portion of the Cascade Pilot interface and shows:

Options:

A.

Two trace clips, the first has two views applied, the second has one view applied.

B.

Two capture job traces, the first has two trace clips associated with it, the second has one trace clip associated with it.

C.

Two Cascade Shark appliances, the first has two capture jobs, the second has one capture job.

D.

Two packet capture (pcap) files, the first has two trace clips associated with it, the second has one trace clip associated with it.

Buy Now
Questions 29

Protocols that are typically monitored in TCP/IP networks by visibility tools include (Select 3):

Options:

A.

SAN HBA Protocol

B.

TCP Protocols such as HTTP and HTTPS

C.

UDP Protocols such as SMTP and Video streaming

D.

IPv4 Protocols including TCP, UDP, and ICMP

E.

IPv4 Protocols such as x.25, TTY and TTL

Buy Now
Questions 30

NetProfilers System à Information page shows Overall Storage Status as red when: (Choose four.)

Options:

A.

Drives are Failing/Missing

B.

RAID is Rebuilding

C.

Partitions are not mounted or mounted as read-only.

D.

Drives are OK.

E.

Drives have Low/No Space.

Buy Now
Questions 31

Two popular data center projects that network visibility tools can assist with include:

Options:

A.

Virtualization and Data Center Mobility

B.

Rationalization and Irrationalization

C.

Virtualization and Data Center Consolidation

D.

Remote Site monitoring and Packet Exportation

E.

Data Import and Data Export

Buy Now
Questions 32

Refer to the exhibit.

Besides “Host/Group”, what are other Quick report search criteria that are available in the Cascade Profiler GUI?

Options:

A.

User

B.

Port/Group

C.

Interface/Device

D.

Applications

E.

QoS

F.

All the above

Buy Now
Questions 33

What Operating System is required for installation of Cascade Pilot?

Options:

A.

Windows Server 2003 or Windows Server 2008

B.

Windows XP, Windows Vista, or Windows 7

C.

Cascade Pilot is not specific to an operating system since access is through any standard web browser.

D.

Any operating system supported by Wireshark

Buy Now
Questions 34

How does the Cascade Profiler determine the optimization levels achieved for WAN Optimization reports?

Options:

A.

Compare the amount of traffic crossing a LAN interface to the corresponding traffic crossing an optimized WAN interface.

B.

Compare updates received via SNMP from Steelhead optimization devices with router devices.

C.

The Cascade Profiler cannot determine optimization levels.

D.

Through manual entry of levels achieved.

E.

Compare updates received via flows from Steelhead optimization devices with router devices.

Buy Now
Questions 35

What is the minimum speed recommended for interfaces on Cascade Enterprise Profiler interconnections?

Options:

A.

1000Mbps

B.

any speed, it does not matter.

C.

10000Mbps

D.

10Mbps

E.

100Mbps

Buy Now
Questions 36

If the status in a SteelCentral Portal Application Map does not show colors, this is likely because:

Options:

A.

Manually created hosts are not monitored

B.

Manually created relationships are not monitored

C.

Thresholds need to be set

D.

All of the above

Buy Now
Questions 37

In order to work with live traffic on the Cascade Shark from Cascade Pilot:

Options:

A.

You MUST connect to the Cascade Shark through its web interface, export packets to a packet capture (pcap) file, then from within Cascade Pilot you can open the pcap file.

B.

You MUST use a Cascade Gateway to view packet data on Cascade Shark.

C.

You MUST use a Cascade Profiler to view packet data on Cascade Shark.

D.

You can simply connect to the Cascade Shark appliance directly from Cascade Pilot provided that proper network communication is available between Cascade Pilot and Cascade Shark.

E.

You can simply connect to the Cascade Shark appliance directly from Cascade Pilot provided that a capture job has already been configured from the Cascade Shark Web Interface and proper network communication is available.

Buy Now
Questions 38

Which of the following devices could be the data source for Cascade Profiler? (Select 3)

Options:

A.

Cascade gateway

B.

Cascade Pilot software

C.

Wireshark software

D.

Cascade Sensor

E.

Cascade Shark

Buy Now
Questions 39

From what source does Cascade obtain Identity (user name) information?

Options:

A.

Through RADIUS server(s)

B.

From Domain Controller(s)

C.

Through standards-based LDAP queries

D.

Via SNMP queries

Buy Now
Questions 40

An interactive view within Cascade Pilot is:

Options:

A.

A downloadable customized view from the online Cascade community.

B.

Any view that is applied to live devices and dynamically updated.

C.

A view that can be created after drill-down from one view to another.

D.

Any view that was created by applying a traffic filter.

E.

All views within Cascade Pilot are considered interactive views.

Buy Now
Questions 41

There are the major characteristics of groups in SteelCentral Portal.

Options:

A.

Provide structure in the application model

B.

Manually created

C.

Can be expanded or collapsed

D.

All of the above

Buy Now
Questions 42

Time control in Cascade Pilot is useful when you: (Select 2)

Options:

A.

Know the time span analyzed by the View.

B.

Want to change the time selection covered by the View.

C.

Change the resolution of a strip chart.

D.

Analyze more than one trace file.

Buy Now
Questions 43

Cascade can report on which of the following protocols: (Select 3)

Options:

A.

ARP

B.

ICMP

C.

UDP

D.

TCP

E.

AppleTalk

F.

Ethernet

Buy Now
Questions 44

To change the page refresh rate for the Cascade Profiler UI from one minute to ten minutes for a specific user which page would you navigate to?

Options:

A.

Configuration

B.

Setup Page

C.

UI Preference

D.

Personal Dashboard

E.

Configuration/General Settings

Buy Now
Questions 45

A company would like to have the Cascade Profiler report DNS-derived host names in reports. To allow this the Cascade Profiler must be configured by:

Options:

A.

Using the Primary DNS server obtained via DHCP from the Cascade Profiler’s management interface.

B.

Using the Secondary DNS server obtained via DHCP from the Cascade Profiler’s management interface.

C.

Using the Tertiary DNS server obtained via DHCP from the Cascade Profiler’s management interface.

D.

Using the DNS server(s) as defined in the Configuration > General Settings page.

E.

Using any DNS servers the Cascade Profiler auto-discovers in the Inside Address space, found in the Configuration > DNS Settings page.

Buy Now
Questions 46

When Cascade Pilot is connected to Cascade Shark:

Options:

A.

Cascade Shark interfaces and captures job traces appear under the devices tab within the sources panel.

B.

Cascade Shark interfaces appear under the devices tab of the sources panel AND Cascade Shark capture job traces appear under the files tab of the sources panel.

C.

Cascade Shark interfaces and captures job traces appear in the views panel.

D.

Cascade Shark interfaces must be selected from the home menu to begin a capture.

Buy Now
Questions 47

Which of the following are valid data sources for Flow Gateway? (Choose four.)

Options:

A.

sFlow

B.

Netflow (v5 and v9)

C.

IPFIX

D.

SteelFlow-Net sources

E.

Syslog

Buy Now
Questions 48

If you needed to replicate flow from a router and forward it in its native format to additional flow collectors, which Cascade device would you use?

Options:

A.

Sensor

B.

Express

C.

Shark

D.

Gateway

E.

Gateway-VE

Buy Now
Questions 49

Outgoing Mail Server (SMTP) Settings enable Cascade Profiler to: (Select 2)

Options:

A.

receive mail from others.

B.

send reports.

C.

send disk failure notifications.

D.

send alerts.

Buy Now
Questions 50

A Watch in Cascade Pilot: (Select 3)

Options:

A.

Is a graphic object used to show selected and global time windows for the applied View.

B.

Can be applied to both live captures and saved pcap files.

C.

Is a feature that allows a user to be notified when a specified event occurs on the network.

D.

Can send a syslog message when an event is triggered.

Buy Now
Questions 51

In a mixed Windows 2003 and Windows 2008 domain environment, what are the options for setting up Active Directory (AD) integration with Cascade? (Select 2)

Options:

A.

You must run only a single version of the AD connector program.

B.

Install the AD Connector 1.5 on all domain controllers.

C.

Install the appropriate version of the AD Connector on each domain controller.

D.

Install the AD Connector v2.0 on all domain controllers.

E.

Install the AD Connector v2.0 on an Event Collector host.

Buy Now
Questions 52

What are the primary differences between NetExpress, Standard NetProfiler, and Enterprise Cluster solutions? (Choose two.)

Options:

A.

Maximum flow capacity.

B.

Maximum number of operational analytics.

C.

Maximum number of users supported.

D.

Maximum number of available reports.

Buy Now
Questions 53

For Cascade Profiler, Where can a user customize which recipients (SMTP and/or SNMP) are alerted when different severity events from different policies are triggered?

Options:

A.

In UI preferences

B.

In behavior analysis - policies

C.

In behavior analysis - notifications

D.

In behaviors analysis - events

E.

In configuration - general settings

Buy Now
Questions 54

Deployment of Virtual NetProfiler, Virtual NetExpress, and Virtual Gateway is supported on which version of ESXi? (Choose three.)

Options:

A.

5.5

B.

5.0

C.

5.1

D.

4.0

Buy Now
Questions 55

Which program needs to be installed on the Windows Active Directory Server to retrieve and forward identity logs to a NetProfiler?

Options:

A.

Wireshark

B.

AD Connector

C.

SNMP Connector

D.

Syslog Collector

Buy Now
Questions 56

In a Cascade deployment, which flow types does a Gateway accept?

Options:

A.

NetFlow v9

B.

sFlow

C.

Federated Data Records (FDR)

D.

IPFix

E.

CascadeFlow from Steelhead

F.

All of the above

Buy Now
Questions 57

What is a benefit of Cascade’s Deep-Packet Inspection? (Select 4)

Options:

A.

Cascade can determine every URL that a client goes to out on the internet.

B.

Cascade can identify applications at Layer7 which will aid in determining business versus non-business use-age of resources.

C.

Cascade can identify applications that use multiple common ports based upon Layer7 to more readily track application dependencies.

D.

Cascade can be configured with URLs, match those URL’s to application names and, in order to understand which applications are utilized on web servers that host multiple web applications over the same TCP port.

E.

Cascade can identify unencrypted applications such as FTP and TELNET regardless of port number, and other applications (such as Peer to Peer) that may violate a company’s security policies.

Buy Now
Questions 58

From Cascade Pilot, reports may include:

Options:

A.

One or all views from the main workspace.

B.

Notes entered associated with a view.

C.

Analyst and Client information entered.

D.

A and B.

E.

A, B and C.

Buy Now
Questions 59

Where in the Cascade Profiler GUI do you change the hosts considered internal to the Profiler?

Options:

A.

System->Devices & Interfaces

B.

Configuration->Accounts

C.

Definitions->Host Groups

D.

Configuration->General Settings

E.

Dashboard

Buy Now
Questions 60

A filter can be created in Cascade Pilot:

Options:

A.

By importing a display or capture filter from Wireshark.

B.

By saving the filter applied in a View.

C.

Only when you are connected to a Cascade Shark.

D.

Only before applying a View.

Buy Now
Questions 61

Network Round-Trip-Time is measured by Cascade sensors as:

Options:

A.

Time from 1st ACK to 1st DATA.

B.

Time from (SYNACK to 1st DATA) – client delay.

C.

Time from SYN to 1st DATA.

D.

Time from SYN to 1st ACK.

Buy Now
Questions 62

What is a benefit that Cascade provides that is not supported by most other network performance management solutions?

Options:

A.

Identity integration to identify which users are logged into which client machines.

B.

Integration with synthetic transaction tools to obtain response time information.

C.

A fully functional CLI that is easier to use than a Web based GUI.

D.

A Web based GUI that does not require a password or HTTPS connection allowing for easier connection.

Buy Now
Questions 63

In configuring a router to send NetFlow to Cascade, an important point to consider is:

Options:

A.

Ensuring the interface of the Cascade Profiler is on the same subnet as the router, as NetFlow is not routable.

B.

Using the “tcp/(n) + 1” port numbering scheme to ensure this router’s NetFlow is unique from all other routers.

C.

Ensuring the router has IP connectivity to the Cascade Gateway.

D.

Ensuring the interface of the Cascade Gateway is on the same subnet as the router, as NetFlow is not routable.

E.

Using the “udp/(n) + 1” port numbering scheme to ensure this router’s NetFlow is unique from all other routers.

Buy Now
Questions 64

Which product category is Cascade likely to be included within? (Select 3)

Options:

A.

Fault Management

B.

Application Performance Management (APM)

C.

Network Behavior Analysis (NBA)

D.

Flow based Network Monitoring and Analysis

Buy Now
Questions 65

A NetFlow type that the Cascade system can process include:

Options:

A.

NetFlow v5

B.

CascadeFlow

C.

IPFix

D.

cflowd

E.

NetFlow v9

F.

All of the above

Buy Now
Questions 66

To receive external notification for Cascade Profiler Alerts:

Options:

A.

SMTP or SNMP must be configured.

B.

I have to have an account on Cascade.

C.

Lotus Notes has to be installed.

D.

I need a Riverbed e-mail account.

Buy Now
Questions 67

After installing a new Cascade Express how long must you wait before the data collected is available for use?

Options:

A.

Seven days

B.

Three days

C.

It depends on the flow rate.

D.

Twenty-four hours

E.

None of the above

Buy Now
Questions 68

Fill in the blanks. Using _____ based technology you can query a networking device for statistics such as number of packets and bytes sent out an interface. Using _____ you can export conversation details (including number of bytes and packet per conversation) providing greater granularity into each conversation through a device.

Options:

A.

SNMP; Snap-Length

B.

TAP; SNMP

C.

TAP; Syslog

D.

SNMP; NetFlow

E.

Syslog; NetFlow

Buy Now
Questions 69

Where are Application Names used within the Cascade Profiler GUI?

Options:

A.

On Dashboards

B.

In Reports

C.

In User Defined Policies

D.

In Application Performance Policies

E.

All of the above

Buy Now
Questions 70

Within NetProfile, how do User-Defined Policies differ from policies such as the Application Performance Policy, Link Congestion Policy, and Link Outage Policy?

Options:

A.

User-Defined Policies are used only to compare current traffic against fixed values while other policies may allow you to compare traffic against both fixed values and a baseline, depending on the type of policy.

B.

User-Defined Policies can be used to compare current traffic against a baseline of traffic built over the past several days, weeks, and months, while other policies compare current traffic against fixed values only.

C.

User-Defined Policies allow you to set a minimum amount that a policy must change by before an alert will be created, whereas other policies do not.

D.

There are no specific differences between User-Defined Policies and other policies, except the names of the policies.

Buy Now
Questions 71

What is an initiative with which Cascade can help? (Select 3)

Options:

A.

WAN Optimization

B.

Data Center Consolidation

C.

Router Configuration Management

D.

Firewall Audit

Buy Now
Questions 72

How many simultaneous users can access Cascade Profiler?

Options:

A.

Ten

B.

Four

C.

Unlimited

D.

Twenty

Buy Now
Questions 73

What is the maximum number of 1GB capture ports that can be provisioned on the Cascade Shark appliance model CSK-03200?

Options:

A.

2

B.

4

C.

6

D.

8

E.

12

Buy Now
Exam Code: 201-01
Exam Name: Riverbed Certified Solutions Associate - Network Performance Management
Last Update: Oct 7, 2024
Questions: 245
$64  $159.99
$48  $119.99
$40  $99.99
buy now 201-01