Pre-Winter Special Sale - Limited Time 60% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 575363r9

Welcome To DumpsPedia

299-01 Sample Questions Answers

Questions 4

Within Cascade Pilot, to analyze the round-trip time in a trace file, you can:

Options:

A.

Ask Riverbed Support to send you the proper View to use.

B.

Open the View folders in Cascade Pilot to look for a View named "Round-trip time".

C.

Use the View search box and enter "round".

D.

Use the Help menu and search for round.

Buy Now
Questions 5

What is the minimum number of physical appliances required when building Cascade solution that will collect and process 3.6 million unique (de-duplicated) flows/minute from NetFlow sources?

Options:

A.

11 for the Cascade Profiler, 3 Cascade Gateways

B.

10 for the Cascade Profiler, 3 Cascade Gateways

C.

11 for the Cascade Profiler, 5 Cascade Gateways

D.

10 for the Cascade Profiler, 5 Cascade Gateways

E.

12 for the Cascade Profiler, 4 Cascade Gateways

Buy Now
Questions 6

Which of the following are available integrations for Cascade Profiler? (Select 3)

Options:

A.

SNMP to send traps to trap receivers.

B.

SNMP to discover switch ports associated with IP addresses.

C.

SNMP to discover router interface capacities.

D.

SNMP to discover router CPU utilization.

Buy Now
Questions 7

When saving a new application performance analytic on Cascade Profiler, which of the following is true?

Options:

A.

You must have at least three days of history of 15 minute rollups before saving the analytic.

B.

You must have at least three days of history of 15 minute rollups before the analytic initializes.

C.

If you include all possible metrics, but there is no possibility of measuring response time due to lack of Sensor coverage, the analytic will fail to initialize.

D.

The analytic will not alert for a minimum of 1 week during baseline collection.

E.

Both B and C.

Buy Now
Questions 8

When links in a network are using WAN optimization, it is best if the Cascade Profiler or Express receives data from a _________or _________ monitoring traffic on the LAN side of the Steelhead that is located on the server side of the optimized connection. This is necessary in order to determine server delay.

(Select 2)

Options:

A.

Cascade Shark

B.

Router

C.

Layer 3 switch

D.

Steelhead appliance

E.

Cascade Sensor

Buy Now
Questions 9

The Discovery Wizard has been used to map a complex application to be monitored by Cascade's service monitoring for a company with 25 remote locations and one data center, each defined as a group within the group type used. There are two front-end segments to signify incoming end user connections, and 15 back-end connections among all of the servers. The only metric/policy activated for each segment is the 'Response Time' metric. How many policies on the Cascade Profiler will this service consume?

Options:

A.

40

B.

65

C.

17

D.

55

E.

425

Buy Now
Questions 10

Which parameters can be used to set up an Application Performance analytic on Cascade Profiler?

Options:

A.

Applications, Ports/Protocols, QOS, Servers, Clients

B.

Ports/Protocols, QOS, Servers, Clients

C.

Applications, Ports/Protocols,

D.

Applications, Ports/Protocols, QOS, Servers, Clients, Interfaces

Buy Now
Questions 11

A user wants to use the link congestion analytic policy on Cascade Profiler to monitor five key WAN links for an increase in traffic outside of the expected traffic that includes TCP/80, TCP/443, TCP25, and UDP/53. Can the link congestion policy be used for this scenario?

Options:

A.

No, because a link analytic can monitor only a single interface.

B.

Yes, one can define separate link congestion analytic policies for each WAN interface.

C.

No, because one can only define specific ports to include on a link congestion policy.

D.

Yes, because one can define a port group that includes every UDP and TCP port except for those that include the expected traffic, and that port group can be used for the link congestion analytic policy.

E.

No, and both A and C include valid reasons.

Buy Now
Questions 12

Within Cascade Pilot a Watch can: (Select 3)

Options:

A.

Send an email when the traffic reaches at least 1MB/sec.

B.

Notify all Cascade Pilot users connected to a specific Cascade Shark appliance when a specified traffic event occurs.

C.

Create a Web traffic report with a specific time window.

D.

Start a Capture Job each time the VoIP traffic goes below 2MB/sec.

Buy Now
Questions 13

Which version of SNMP traps can the Cascade Profiler and Cascade Express send?

Options:

A.

SNMPv1 Only

B.

SNMPv2 Only

C.

SNMPv1 and SNMPv2

D.

SNMPv1 and SNMPv3

Buy Now
Questions 14

In order to analyze data captured by a Cascade Shark appliancE. (Select 3)

Options:

A.

You can connect directly to the Cascade Shark with Cascade Pilot to begin analysis.

B.

You can connect directly to the Cascade Shark with Cascade Gateway to begin analysis.

C.

You can start analysis on the Cascade Profiler based upon flow data that has been sent from Cascade Shark to Cascade Profiler.

D.

You can export data from a capture job directly to a packet capture (pcap) file and open in any tool that accepts pcap format.

E.

You can start by loading views of the data from the Cascade Shark Appliance Web GUI before export to Wireshark.

Buy Now
Questions 15

When analyzing a large (100GB, for example) trace file within Cascade Pilot, you should:

Options:

A.

Copy the file onto a Cascade Shark to ensure better performance.

B.

Create an index so that processing of the View analytics will be faster.

C.

Apply a View with a specific filter.

D.

Use Wireshark tools to split the trace file in multiple and smaller trace files.

Buy Now
Questions 16

How do all the Cascade components stay time synchronized?

Options:

A.

They all point to the same NTP server.

B.

The Profiler, ideally, points to an NTP server (although it can use local time as well), the Gateway and Sensor get their time information from the Profiler which acts as their NTP Server.

C.

For security reasons, all components use local time. The same time should be set on each component.

D.

They all synchronize their time via timestamps in Netflow sources.

Buy Now
Questions 17

How many SNMP recipients can receive a single event notification for Cascade Profiler?

Options:

A.

1

B.

2

C.

3

D.

4

E.

5

Buy Now
Questions 18

On the Cascade Profiler, which of the following is not a Scanner Choice under Vulnerability Scan Setup? (Select 2)

Options:

A.

Nessus

B.

Rapid7

C.

Qualys

D.

Retina

E.

nCircle

F.

MBSA

Buy Now
Questions 19

Once the Cascade Shark appliance has an initial configuration with an IP Address set to 10.1.1.1 you can connect to it from a web browser using the URL:

Buy Now
Questions 20

Refer to the exhibit.

Traffic that is not analyzed by a Cascade Sensor such as Unclassified, under Override Policy, applies to which of the following conditions:

Options:

A.

Unconditionally overwrite any existing layer 7 application mapping.

B.

Apply to flows that are either Unclassified, or did not match any known layer 7 signatures

C.

Apply only to flows that are not seen by a Cascade Sensor or other layer 7 signature-based device.

D.

None of the above.

Buy Now
Questions 21

When using Network Performance Monitoring solutions the following statements are truE. (select 2)

Options:

A.

HTTP Object load times can be analyzed with full packet capture

B.

SSL Decryption can be used without any special key imports provided the start of the TCP conversation is captured

C.

Software Agents are required on Servers in order to measure the Network Round trip time of applications

D.

ICMP (ping echo/response) must be used in order to measure Network Round Trip time

E.

NetFlow records can be summarized to provide utilization on a router interface

Buy Now
Questions 22

One advantage of using a trace clip for analysis within Cascade Pilot instead of its parent capture job trace is:

Options:

A.

The trace clip is likely smaller in size, so views load faster.

B.

The trace clip is moved to the local system, so views load faster.

C.

The trace clip has a base set of views pre-applied, so analysis is faster.

D.

The trace clip is guaranteed to have trend/index data, so views load faster.

Buy Now
Questions 23

What are possible explanations for no Server Delay measurement being reported for a particular flow? (Select 4)

Options:

A.

The flow includes the UDP protocol.

B.

The traffic was not reported by a Cascade Sensor or Cascade Shark appliance.

C.

The traffic was not reported by a Steelhead appliance's CascadeFlow

D.

The start time for the connection was prior to the timeframe selected for the traffic query.

E.

The packets involved in the initial setup of the TCP connection were not seen by a Cascade Sensor or Cascade Shark appliance.

Buy Now
Questions 24

For an analytic policy that monitors TCP retransmission bandwidth, which of the following best describes what is minimally required before a baseline can be established?

Options:

A.

Three weeks of historical traffic between the clients and servers defined on the policy.

B.

Three days of historical traffic between the clients and servers defined on the policy.

C.

Three weeks of historical traffic between the clients and servers defined on the policy, where retransmissions were reported in more than 50% of the 15 min windows over the three week period.

D.

Three days of historical traffic between the clients and servers defined on the policy, where retransmissions were reported in more than 50% of the 15 min windows over the three day period.

E.

The timeframe required to collect the baseline is not fixed, and is based on the variance of the traffic being monitored.

Buy Now
Questions 25

The Cascade Shark de-duplication mode should be used:

Options:

A.

To de-duplicate duplicate flows sent to the Cascade Profiler appliance caused by the way different Cascade Shark ports may see the same UDP/TCP sessions.

B.

To de-duplicate duplicate flows sent to the Cascade Profiler appliance caused by use of the Aggregating Port seeing the same UDP/TCP sessions.

C.

To de-duplicate duplicate packets that may be collected by the Cascade Shark caused by the way Port Mirroring is configured on a switch.

D.

To de-duplicate duplicate packets that may be collected by the Cascade Shark caused by the way filtering is used on a capture job.

E.

All of the above

Buy Now
Questions 26

What conditions might prevent successful SNMP polling of a flow source? (Select 2)

Options:

A.

An ACL might exist on the flow source (router) and the Cascade Standard Profiler IP address is not in it.

B.

SNMP is not enabled.

C.

The correct IP address of the flow source was not entered into the GUI.

D.

The SNMP read string provided and entered might not be correct.

E.

The flow source is not using the same NTP source as the Cascade Gateway.

Buy Now
Questions 27

In a Cascade deployment with Sensor and Profiler, what information does the Application Performance Policy report show? (Select 4)

Options:

A.

Number of connections per second

B.

Average response time

C.

TCP resets

D.

TCP retransmission

E.

Number of jumbo frames

F.

CPU and memory utilization of server

Buy Now
Questions 28

When creating a custom view in Cascade Pilot, customizations may includE. (Select 3)

Options:

A.

In-chart tool controls

B.

Data Retention Time

C.

Chart Color scheme

D.

Application of a Filter

E.

Sampling Time

Buy Now
Questions 29

For Service policies that get applied to End User segments, by default separate policies are tracked by location for the client traffic. Which of the following is NOT true regarding flexibility in configuration of these End User segments?

Options:

A.

The default hostgroup type used can be changed from Configuration > General Settings.

B.

Different hostgroup types can be used for monitoring End User segments for each Service.

C.

While editing the Service one has the capability to select all sites or a subset of sites to include for monitoring.

D.

When adding a Service Health by Location widget to a dashboard, one has the capability to include all locations or a subset (maximum of 10).

E.

The default hostgroup type used for monitoring End User segments is ByLocation.

Buy Now
Questions 30

Which of the following statements are true (select 2)

Options:

A.

SNMP based technology can query a network device for statistics such as number of packets and bytes sent out an interface but typically doesn't have conversation-level details (such as which IP Addresses where talking at a given time)

B.

NetFlow based technology can query a network device for statistics such as number of packets and bytes sent out an interface but typically doesn't have conversation-level details (such as which IP Addresses where talking at a given time)

C.

NetFlow based technology does NOT typically include response time information, packet inspection is necessary to measure response times

D.

It is NOT possible to understand which conversations traversed a link without full packet capture

E.

SNMP based technology querying routers in the network can be used to view end to end conversations across a network to determine top talkers

Buy Now
Questions 31

What is the purpose of the snmp-server ifindex-persist command in regards to Riverbed Steelhead appliances and Cascade Profiler? (Select 2)

Options:

A.

Guarantees that the ifIndex values for various interfaces remain stable across Steelhead appliance reboots and reconfiguration.

B.

Guarantees that the ifIndex values for various interfaces remain stable across network disruptions preventing re-polling

C.

Guarantees that the ifdescription values for various interfaces remain correctly mapped across Steelhead appliance reboots and reconfiguration.

D.

Guarantees that the ifdescription values for various interfaces are remapped across Steelhead appliance service shutdowns.

Buy Now
Questions 32

When troubleshooting a Steelhead deployment with Cascade you suspect that you may have packet ricochet. Since you are exporting CascadeFlow from the Steelheads to the Cascade how can you use Profiler to see if there actually is packet ricochet?

Options:

A.

Identify connection duration.

B.

Look for high server side packet counts.

C.

Look for high number of reset.

D.

Run a report with a Connection Graph.

E.

Run a report on the WAN Interface of the Steelhead.

F.

Run a report with Flow List and look at the topology columns.

Buy Now
Questions 33

Which of the following are true about Trend/Index data on a Cascade Shark appliancE. (Select 3)

Options:

A.

Allows Cascade Pilot to load views that take advantage of the Index more quickly.

B.

Includes the number of bytes and packets for each conversation seen by the Cascade Shark appliance.

C.

It is configured on a per-port basis.

D.

It is configured using the sa-wizard as part of the initial configuration.

E.

It is enabled by default per capture job.

Buy Now
Questions 34

Company X wants to use Cascade for monitoring the performance of their SQL application to all remote sites before considering purchasing any WAN optimization technology. They would like to add a Cascade Sensor to their network, and therefore they must:

Options:

A.

Enable SPAN or mirror port on a switch in their datacenter, which has visibility of the SQL traffic in question.

B.

Enable a SPAN or mirror port all remote sites where users of the SQL application sit.

C.

Enable NetFlow on at least all WAN routers that carry the SQL traffic.

D.

Configure the SQL servers to send their SNMP traps to the Cascade Profiler.

E.

Configure the SQL servers to send their SNMP traps to the Cascade Gateway.

Buy Now
Questions 35

How does Cascade acquire the Interface Name (ifname) and interface speed (ifspeed) for interfaces reporting to Cascade?

Options:

A.

SNMP polling from the Gateway

B.

SNMP polling from the Profiler

C.

SYSLOG

D.

All of the above

E.

None of the above

Buy Now
Questions 36

What data do I need from netflow sources for the Cascade Profiler report-by "network segments" to work correctly?

Options:

A.

Netflow V5 or V9 with TTL export configured.

B.

NetflowV9 with TTL export configured.

C.

Any version of Netflow since they all export in/out interface information.

D.

UDP port.

Buy Now
Questions 37

Which example, assuming we want the 192.168.1 subnet shown as "Tokyo", shows the correct syntax for setting up this host group under a host group type on Cascade Profiler?

Options:

A.

"192.168.1.0/24 Tokyo"

B.

"Tokyo = 192.168.1.0/24"

C.

"192.168.1.0-192.168.1.255 Tokyo"

D.

"192.168.1.0;255.255.255.0 Tokyo"

Buy Now
Questions 38

On Cascade Profiler, what is the purpose of a Service Segment when creating a new service?

Options:

A.

A service segment is the update time period when devices send Netflow to Cascade Gateways.

B.

A service segment is defined by its components and the applications and/or ports in use between them.

C.

A service segment is defined as the front-end tier that directly services end users with an application.

D.

A service segment is the update time period when Cascade Sensors send MNMP Flow to Cascade Profilers.

Buy Now
Questions 39

Common TCP Errors which may be observed within a network include:

Options:

A.

Zero Window Size, Retransmits, or FIN Flags observed

B.

Increasing Window Size, Resets, Retransmits

C.

Zero Window Size, Retransmits, Lost Packets

D.

SYN, FIN, or RST flags observed

E.

RST or FIN flag observed or Retransmits observed

Buy Now
Questions 40

What types of Layer-7 Application Signatures are available within the Cascade Profiler GUI? (Select 3)

Options:

A.

By URL

B.

By Regular Expression

C.

By Packet Start offset

D.

By ASCII String

E.

By Hex String

F.

By Error Code Type

Buy Now
Questions 41

On Cascade Profiler, Active Directory user names and login information are obtained via the Active Directory Connector from:

Options:

A.

On demand queries to the AD server(s)

B.

A10 networks ID Series appliance

C.

Active Directory audit logs

D.

RADIUS

Buy Now
Questions 42

Within Cascade Pilot, reports can be createD. (select 3)

Options:

A.

From views in the main workspace in PDF, Word, HTML and other formats.

B.

From events that have occurred, also referred to as watches.

C.

With customized information such as company logo and client name.

D.

Including notes that are entered in Chart notes.

E.

Including status of all remote devices (Cascade Shark appliances).

Buy Now
Questions 43

Which of the following are default user-defined policies on Cascade Profiler? (Select 3)

Options:

A.

P2P application Activity

B.

SpamBot Activity

C.

Email traffic surge

D.

Port Scan

E.

P2P Port Activity

Buy Now
Questions 44

A router that has been recently configured to send NetFlow to a Cascade Gateway has yet to appear in the Devices/Interfaces page on the Cascade Profiler. What are the most likely thing to check?

Options:

A.

Traffic is being sent across the router's interfaces configured for flow export.

B.

There are no firewalls blocking communication between router and Cascade Gateway.

C.

There are no firewalls blocking communication between Cascade Gateway and Cascade Profiler.

D.

The port being used for export on the router matches that which has been configured on the Cascade Gateway.

E.

All of the above.

Buy Now
Questions 45

How is the Cascade Pilot license activated?

Options:

A.

The license key is entered during installation. The license is activated either through an Internet connection or by phone.

B.

The license key is entered during installation. The license must be activated through an Internet connection.

C.

The license key is entered during installation. There is no activation but Cascade Pilot will detect if the license is already in use on the network.

D.

There is no license key activation. The software image is shipped with the license key installed.

Buy Now
Questions 46

Which of the following are true about creating a capture job on Cascade Shark: (Select 3)

Options:

A.

A single capture port can be specified.

B.

Any combination of capture ports can be specified.

C.

All capture ports on the Cascade Shark can be specified.

D.

Trend/Index data has a default retention of seven days.

E.

There is no Trend/Index data by default, it is recommended to set this as appropriate.

Buy Now
Questions 47

How does Cascade Profiler track URL's?

Options:

A.

Each URL that is seen by the Sensor is shown on the dashboard or searchable via reporting.

B.

Customer defined URL's are mapped to an application name which can then be shown on the dashboard, searched via reporting, or used in Analytic definitions.

C.

URL's are tracked by either a Cascade Sensor or via NetFlow version 5 (or higher) export.

D.

Cascade does not track URL's.

Buy Now
Questions 48

Cascade accepts lease data from DHCP servers in order to: (Select 2)

Options:

A.

obtain MAC addresses.

B.

improve accuracy of the security baseline.

C.

force lease extensions longer to make tracking unique PCs easier.

D.

obtain an IP for itself.

Buy Now
Questions 49

Within Cascade Profiler the Event Policy categories for which you can receive alerts includE. (Select 4)

Options:

A.

Performance and Availability

B.

TCP Health

C.

VoIP

D.

Security

E.

Health

F.

User-defined Policy

Buy Now
Questions 50

How many signatures can a Layer-7 Fingerprint have?

Options:

A.

1

B.

2

C.

5

D.

8

E.

10

Buy Now
Questions 51

A capture job definition on Cascade Shark may includE. (select 3)

Options:

A.

A BPF packet filter

B.

A disk space allocation

C.

Time-based display resolution

D.

Trend/Indexing parameters

E.

Access credential information

Buy Now
Questions 52

Cascade provides a means for contacting other network devices for additional information about a host or user of interest. Right-clicking a host name, IP address, MAC address or port number and choosing _________________ from the shortcut menu sends a query to the other network device.

Options:

A.

View Packets

B.

Error Report

C.

Restart Service

D.

View Switch Port

E.

External Link

Buy Now
Questions 53

Cascade Profiler is able to report traffic using two different approaches (centricities). Two approaches can result in different results when using the same report criteria due to the way data is aggregated and counted. What are these two approaches? (Select 2)

Options:

A.

Interface centric

B.

Application centric

C.

Host centric

D.

Port centric

E.

The Cascade Profiler does not have two approaches

Buy Now
Questions 54

An interactive view within Cascade Pilot is useful for:

Options:

A.

Applying a very complex filter statement.

B.

Creating a non-sequential time index.

C.

Creating a trace clip file with trend index data.

D.

Interactively connecting charts from 2 or more views.

E.

Creating a PDF report of a view that can be interactively updated.

Buy Now
Questions 55

An interactive view within Cascade Pilot:

Options:

A.

Can be created from a single applied View.

B.

Can work on local trace files only.

C.

Can include more than two charts.

D.

Is not available in the regular Cascade Pilot installation.

Buy Now
Questions 56

In order to create an interactive view on Cascade Pilot:

Options:

A.

Select two views from the views panel using control-click then right click on one and select "Create Interactive View" from the drop-down menu.

B.

After a Drill-Down from one view to another, right click on the Drill-Down view in the sources panel and select "Create Interactive View" from the drop-down menu.

C.

Select any item (such as a host IP Address, Port or Protocol name) in the main workspace and right click on the item, then select "Create Interactive View" from the drop-down menu.

D.

Select any view in the views panel, right-click it and select "Create Interactive View" from the drop-down menu.

E.

Open the filters panel, apply an existing or new filter to the view then select "save as interactive view" from the home menu.

Buy Now
Questions 57

Which of the following types of hosts are included in Cascade grouping on Cascade Profiler?

Options:

A.

Internal hosts only

B.

External hosts only

C.

All hosts

D.

Internal and External hosts only

E.

Specified internal hosts plus the non-routable subnets

Buy Now
Questions 58

When editing a previously configured service policy, what options become available if you click the 'show advanced settings' checkbox? (Select 3)

Options:

A.

Allows enabling/disabling the detection of dips in the metric.

B.

Allows tuning of the tolerance range of the metric.

C.

Allows setting of a noise floor for the metric.

D.

Allows adjusting the notifications for the metric.

E.

Allows enabling/disabling the detection of spikes in the metric.

Buy Now
Questions 59

Cascade dependency mapping (Connection Graphs) have multiple 'layouts' for showing dependencies. Which of the following is not an option?

Options:

A.

Symmetric

B.

Radial tree

C.

Vertical client/server dependency

D.

Starburst

E.

Horizontal tree

Buy Now
Questions 60

Cascade Profiler's Switch Integration feature uses SNMP and adds the capability for Cascade to report on which of the followinG. (Select 2)

Options:

A.

User name

B.

Host IP address

C.

Host MAC address

D.

The physical switch port a specific host is connected to

E.

Switch port traffic levels

F.

Switch port status

G.

SNMP traps from the switch

Buy Now
Questions 61

In the Cascade Profiler Dashboard GUI, what types of content blocks can you create? (Select 4)

Options:

A.

Watched items (where items are hosts, interface, etc.)

B.

Top items (where items are hosts, interface, etc.)

C.

Top usernames

D.

Unacknowledged Events

E.

Current Events

F.

Last Day Events

Buy Now
Questions 62

When defining a service which of the following are supported ways of aggregating the results? (Select 2)

Options:

A.

Client Ports

B.

Applications

C.

Ports

D.

Server

Buy Now
Questions 63

How many items can be displayed in a single watched list in a Profiler Dashboard Content Block?

Options:

A.

Unlimited

B.

Ten

C.

Four

D.

Twenty

Buy Now
Questions 64

In Cascade Profiler, what is the minimum amount of historical flow data required for an Application Performance analytic to initialize?

Options:

A.

Three weeks

B.

Three days

C.

One day

D.

Configurable from one minute to three weeks

Buy Now
Questions 65

To better analyze live traffic on Cascade Shark from Cascade Pilot you should:

Options:

A.

Apply a View on the live interface and then start a Capture Job on the capture port to analyze traffic later.

B.

Start a Capture Job on the capture port with a BPF filter and apply a View on the live interface for the same capture job.

C.

Start a Capture Job on the capture port, apply a View on the live interface and create a trace clip for the time window of interest.

D.

Never create a Capture Job to prevent packet drops.

Buy Now
Questions 66

Why should all flow exporting devices use the same NTP (Network Time Protocol ) source?

Options:

A.

Ensures Cascade is able to recreate the packets.

B.

Essential for the flow de-duplication process.

C.

Ensures the flow is delivered to the correct Gateway.

D.

All of the above.

E.

None of the above.

Buy Now
Questions 67

On the Cascade Profiler, when importing a switch mitigation device list, it needs to be in the following format:

Options:

A.

host_name, device_type, read_only_community_string, write_community_string

B.

host_name, IP_address, read_only_community_string, write_community_string

C.

host_name, IP_address, device_type, read_only_community_string, write_community_string

D.

host_name, IP_address, device_type, read_only_community_string, write_community_string, pass phrase

Buy Now
Questions 68

How many Host Group Types can be tracked on the Dashboard within the Cascade Profiler GUI?

Options:

A.

Unlimited

B.

Ten

C.

Four

D.

Twenty

Buy Now
Questions 69

What are the two types of dashboards available within the Cascade Profiler GUI? (select 2)

Options:

A.

Top Hosts

B.

Top Applications

C.

Public

D.

Private

E.

Devices and Interfaces Utilization

Buy Now
Questions 70

Which fields are generally available for export using NetFlow technology?

Options:

A.

IP Addresses, Port Numbers, Protocol, TCP Flags, DSCP Marking, number of bits, number of packets, retransmitted bits

B.

IP Addresses, Port Numbers, Protocol, TCP Flags, DSCP Marking, number of bits, number of packets, inbound/outbound interface ID

C.

IP Addresses, MAC Addresses, Port Numbers, Protocol, DSCP Marking, number of bits, number of packets

D.

IP Addresses, Port Numbers, Protocol, Round Trip Time, DSCP Marking, number of bits, number of packets

E.

IP Addresses, Port Numbers, Protocol, Packet Latency, DSCP Marking, number of bits, number of packets

Buy Now
Questions 71

Which of the following statements is true regarding SNMP polling and NTP syncing among Cascade components?

Options:

A.

Cascade Gateway's poll via SNMP sources of Netflow, while Cascade Profiler, Cascade Gateway and Cascade Sensor sync NTP from a common source.

B.

Cascade Profiler's poll via SNMP sources of Netflow, while Cascade Profiler, Cascade Gateway and Cascade Sensor sync NTP from a common source.

C.

Cascade Profiler, Cascade Gateway and Cascade Sensor sync NTP from different sources, while Cascade Profiler's poll via SNMP sources of Netflow.

D.

Cascade Profiler, Cascade Gateway and Cascade Sensor sync NTP from different sources, while Cascade Gateway's poll via SNMP sources of Netflow.

E.

Cascade Profiler does all SNMP polling and is also the source of all NTP.

Buy Now
Questions 72

What is the maximum limit of configurable flows that can be exported from the Cascade Shark appliance? (Select 2)

Options:

A.

200,000 flows per minute per port

B.

300,000 flows per minute per port

C.

500,000 flows per minute per port

D.

500,000 flows per minute total

E.

600,000 flows per minute total

Buy Now
Questions 73

What is a good way to know whether all internal IP addresses seen by the Cascade Profiler have been grouped in a particular group type?

Options:

A.

Run Automatic grouping for all group types.

B.

Configure an Undefined group type with definition 0.0.0.0/0; confirm there are no entries when you 'view members' of this 'Undefined' group'.

C.

There is no way to do this and successfully capture all the IP addresses.

D.

Configure an Undefined group type with definition 0.0.0.0/32.

E.

Run a report by hosts and look for undefined groups.

Buy Now
Exam Code: 299-01
Exam Name: Riverbed Certified Solutions Professional - Network Performance Management
Last Update: Oct 7, 2024
Questions: 245
$64  $159.99
$48  $119.99
$40  $99.99
buy now 299-01