C_S4CPB_2402 Sample Questions Answers

 To integrate SAP S/4HANA Cloud Public Edition with another SAP public cloud solution, you should use SAP Integration Suite and predelivered APIs. SAP Integration Suite is a cloud-based integration platform that provides a comprehensive set of capabilities to connect applications, data, and processes across different environments. Predelivered APIs are predefined interfaces that enable communication and data exchange between SAP S/4HANA Cloud Public Edition and other SAP public cloud solutions, such as SAP SuccessFactors, SAP Ariba, SAP Fieldglass, and SAP Concur. SAP Process Orchestration and SAP Cloud Connector are not the correct technologies for this scenario, as they are mainly used for integrating SAP S/4HANA Cloud Public Edition with on-premise or hybrid systems. References = SAP S/4HANA Cloud Public Edition - Integration, SAP Integration Suite, SAP S/4HANA Cloud Public Edition - API Hub

During the Fit-to-Standard workshops, an implementation consultant supports customer experts by doing the following:

• Demonstrate SAP Best Practice business processes in the starter system. The consultant shows the customer experts how the standard processes work in SAP S/4HANA Cloud Public Edition and how they fit their business needs1.
• Highlight areas that require configuration or customization decisions. The consultant identifies and documents the gaps between the standard processes and the customer requirements, and proposes solutions that are aligned with the cloud mindset1.

The other options are not the correct ways to support customer experts during the Fit-to-Standard workshops. Determining set up instructions for customer-driven integrations is done in the integration phase, after the Fit-to-Standard workshops are completed2. Conducting end-user training on active scope items is done in the deploy phase, before the go-live of the system3. References = Conducting Fit-to-Standard Workshops - SAP Learning, SAP S/4HANA Cloud Public Edition - Integration, Deploying SAP S/4HANA Cloud Public Edition.

You specify the data retention period in the SAP S/4HANA Migration Cockpit when the project status is “Finished”. The data retention period is the length of time (in days) that the project and all associated data is kept in the system after you have set the status of the project to Finished. To do this, set the option Data Retention Period to On. The data will be deleted from the SAP S/4HANA system when the data retention time expires. If you set the option Data Retention Period to Off, then the project and all associated data will be kept in the system indefinitely. You can also change the retention time for finished projects on the Technical Information tab of the project settings. References = The Migration Project Screen, Migrating Data to the SAP S/4HANA System

 Industry cloud solutions are cloud-based solutions that address specific industry needs and challenges. They are designed to complement and extend the capabilities of SAP S/4HANA Cloud Public Edition and other SAP solutions. You can find industry cloud solutions on the SAP Store, which is the online marketplace for SAP and partner offerings. On the SAP Store, you can browse, discover, try, buy, and deploy industry cloud solutions that suit your business needs. References = SAP S/4HANA Cloud Public Edition, SAP Learning, SAP Store

 The SAP S/4HANA Migration Cockpit is a tool that facilitates the transfer of business data from a source system to SAP S/4HANA. It uses migration objects to identify and transfer the relevant data for a specific business object. The SAP S/4HANA Migration Cockpit has the following characteristics1:

• It allows mapping source values to SAP S/4HANA target values, as well as converting values that are migrated from source fields to target fields. This ensures data consistency and quality in the target system.
• It provides guidance and simulation of the migration process, as well as error handling and monitoring. This helps to reduce the complexity and risk of data migration, and to ensure a smooth and successful data transfer.
• It does not support extensibility using the Legacy System Migration Workbench (LSMW), which is a tool for data migration from legacy systems to SAP systems. The SAP S/4HANA Migration Cockpit has its own extensibility framework, the SAP S/4HANA Migration Object Modeler, which allows creating and enhancing migration objects2.
• It does not combine the local and remote schema approaches into one migration project. The SAP S/4HANA Migration Cockpit offers three options for transferring data to SAP S/4HANA: using files, using staging tables, or using direct transfer from an SAP system1. Each option requires a separate migration project and has its own advantages and limitations3. References = 1: SAP S/4HANA Migration Cockpit | SAP Help Portal 2: [SAP S/4HANA Migration Object Modeler | SAP Help Portal] 3: [Options for Transferring Data | SAP Help Portal]

Indirect digital access occurs when humans, devices, or systems use the digital core indirectly through non-SAP intermediary software, such as a non-SAP front end, a custom-solution, or any other non-SAP application1. Indirect digital access is measured by the number of documents created, updated, or deleted in the SAP system as a result of the indirect use2. Examples of indirect digital access include:

• A Defect document created through an industry application: This is an example of indirect digital access because the industry application is a non-SAP software that triggers the creation of a document in the SAP system.
• A Time Sheet Record from a 3rd party application: This is also an example of indirect digital access because the 3rd party application is a non-SAP software that triggers the creation of a document in the SAP system.
• An unattended bot in SAP Build Process Automation: This is not an example of indirect digital access because the bot is using SAP software to access the SAP system directly, not through a non-SAP intermediary software.
• A Production Order created through a non-SAP front-end: This is not an example of indirect digital access because the production order is not a document type that is counted for indirect digital access. The document types that are counted are: Sales Order, Invoice, Purchase Order, Service and Maintenance Document, Manufacturing Document, Quality Management Document, Time Sheet, Financial Document, and Material Document2. References = Digital Access | SAP Help Portal, SAP Digital Access / SAP Digital Access Adoption Program (DAAP) Extension through December 31, 2021

The following would prevent SAP from running a Post-Upgrade Test (PUT) on a customer’s behalf:

• An execution variant has not been maintained: An execution variant is a set of test data that is used to execute a test process. It contains the input values and expected results for each test step. If an execution variant is not maintained for a test process, the system cannot run the test automatically and will skip it1.
• The test process failed the execution pre-check: The execution pre-check is a validation that is performed before the test execution to ensure that the test process and the execution variant are consistent and complete. If the execution pre-check fails, it means that there are some issues or gaps in the test process or the execution variant that need to be resolved before the test can be run2.

The following would not prevent SAP from running a Post-Upgrade Test (PUT) on a customer’s behalf:

• Data marked for deletion is picked for execution: Data marked for deletion is data that is no longer relevant or valid for the test process. It can be marked for deletion by the customer or by SAP. However, this does not affect the test execution, as the system will ignore the data marked for deletion and use the available data for the test process3.
• The process steps have been reordered: The process steps are the individual actions that are performed as part of the test process. They can be reordered by the customer or by SAP to reflect the changes in the business process or the user interface. However, this does not affect the test execution, as the system will follow the order of the process steps as defined in the test process4.

References = [SAP S/4HANA Cloud Public Edition - Execution Variants], [SAP S/4HANA Cloud Public Edition - Execution Pre-Check], [SAP S/4HANA Cloud Public Edition - Data Marked for Deletion], [SAP S/4HANA Cloud Public Edition - Process Steps].

 Fiscal year variant and group currency are activities that are applied to the entire system and cannot be changed after confirmation in SAP Central Business Configuration. These activities are part of the system provisioning step, which is the first step in the implementation process. Once the system provisioning is completed and confirmed, the system is locked for these activities and any changes would require a new system provisioning. Scoping and configuration activities, on the other hand, are not applied to the entire system and can be changed later on in the project experience step, which is the second step in the implementation process. Scoping and configuration activities allow the user to adapt the preconfiguration content to their company’s needs and extend the configuration for areas not equipped with preconfiguration content. References = SAP Central Business Configuration – Overview, page 6; Configuring with SAP Central Business Configuration

Based on the SAP Activate methodology, the Explore phase is where consultants configure business processes based on the information gathered in the Fit-to-Standard workshops. The Fit-to-Standard analysis is conducted in a series of workshops and allows for validation of predefined scenarios agreed upon and to make room for enhancements or additional configuration required. To prepare for this workshop, it is recommended that teams get familiar with the SAP Best Practices content, including the process flows, test scripts with sample data, and other documentation available in SAP Best Practices Explorer.Consultants should also use the Test system to demonstrate SAP Best Practice processes and enable business users to run the end-to-end processes and identify any gaps. The other two activities, conducting the Digital Discovery Assessment and defining the organizational structure and chart of accounts, are part of the Prepare phase, not the Explore phase. References = SAP Activate – Explore Phase: Use Fit-to-Standard to confirm business process fit and identify gaps in your SAP S/4HANA Cloud Implementation, SAP Explore Phase Activities: Define Target BP and Architecture, SAP Activate Elements and Phases, Explaining the Explore Phase

Side-by-side extensibility is the type of extensibility where the SAP Business Technology Platform is used to host a custom extension and integrate it with the SAP S/4HANA Cloud system. Side-by-side extensibility enables customers and partners to build extensions that are decoupled from the core SAP S/4HANA Cloud system, ensuring lifecycle stability and avoiding modification of SAP code. Side-by-side extensibility leverages the capabilities of the SAP Business Technology Platform, such as SAP Cloud Platform Workflow Services, SAP Cloud Platform Business Rules, SAP Cloud Platform Integration, and SAP Cloud Platform Extension Factory. References = Utilizing the Clean Core Strategy and Extensibility Tools; Using Side-by-Side Extensibility with SAP Business Technology Platform

The Extensibility Cockpit app within SAP S/4HANA Cloud Public Edition is a central tool formanaging and monitoring the extensibility aspects of the system. It provides an overview of the extension items created, including custom fields, custom business objects, and other extension elements. Importantly, it also shows the available business context capacity remaining for these extension items, which is crucial for ensuring that the system's extensibility is managed within the provided limits. This helps in planning and managing customizations effectively, ensuring that the system remains scalable and performant.

SAP Cloud ALM for Implementation is the component that provides access to the SAP Activate Roadmap of SAP S/4HANA Cloud Public Edition (3-system landscape). The SAP Activate Roadmap is a tool that guides the implementation project team through the phases, deliverables, tasks, and accelerators related to the SAP Activate methodology. The SAP Activate Roadmap is updated frequently to reflect the latest scope, processes, and best practices for SAP S/4HANA Cloud Public Edition. The SAP Cloud ALM for Implementation component also enables the project team to monitor the progress, status, and quality of the implementation project. References = SAP S/4HANA Cloud, Public Edition, 3-System Landscape – Upgrade & Maintenance Schedule, SAP Activate ContentUpdates for SAP S/4HANA Cloud, public edition (3-system landscape), News from SAP Activate - SAP S/4HANA Cloud, public edition 2308, SAP Activate Release Notes for SAP S/4HANA Cloud Public Edition

 SAP Business Application Studio and SAP Build are two tools that enable customers to develop their own custom applications and integrate them with SAP S/4HANA Cloud Public Edition. SAP Business Application Studio is a cloud-based development environment that offers both low-code and full-stack development capabilities. It supports various SAP technologies and frameworks, such as SAP Fiori, SAPUI5, SAP Cloud Application Programming Model, and SAP Cloud SDK. SAP Build is a cloud-based prototyping and user research tool that helps customers to design and test user interfaces for their applications. It provides a drag-and-drop interface, a library of UI components, and integration with SAP Web IDE and SAP Fiori Launchpad. Both tools are part of the SAP Extension Suite, which provides a range of services and capabilities to extend SAP applications and processes. References = Create a SAP Fiori App and Deploy it to SAP S/4HANA Cloud > Create a SAP Fiori App and Deploy it to SAP S/4HANA Cloud. Create a SAP Fiori App and Deploy it to SAP S/4HANA Cloud > Create a SAP Fiori App and Deploy it to SAP S/4HANA Cloud. Low-code/No-code | SAP Developers.

 The Manage KPIs and Reports app is a single platform for creating all analytical applications using KPIs, reports, multidimensional reports, and stories. You can create applications that can be launched directly from SAP Fiori launchpad. The app is integrated with SAP Analytics Cloud, which allows you to create and view stories. A story is a presentation-style document that uses charts, tables, and other visualizations to display data insights. A review booklet is a collection of stories that can be used to share information with stakeholders. A multidimensional report is a type of report that allows you to analyze data from multiple dimensions and measures. You can create and view multidimensional reports from the app. An object view is a type of report that displays data for a single object, such as a customer or a product. You cannot create or view object views from the app. A Lumira dashboard is a type of dashboard that uses SAP Lumira to create and display data visualizations. You cannot create or view Lumira dashboards from the app. References = Manage KPIs and Reports, Stories, Review Booklets, [Multidimensional Reports]

Manual test cases for customer User Acceptance Testing are created in SAP Cloud ALM, a cloud-based application lifecycle management solution that supports SAP S/4HANA Cloud Public Edition implementations. SAP Cloud ALM provides test management apps that allow consultants to document and track all testing activities for both manual and automated test cases in one location. Manual test cases are created in the Test Preparation app based on the finalized solution scope (business processes) and assigned to test plans in the Test Plans app. SAP Cloud ALM also integrates with the SAP S/4HANA Cloud test system and third-party test providers to execute and monitor automated test cases. References = Preparing Test Cases for User Acceptance Testing, Explaining the Test Strategy, User acceptance testing templates