Ericsson ECP-206 Dumps

In the exhibit, the action performed by router R3 for traffic arriving from router R2 towards router R4 is PHP, which stands for penultimate hop popping. PHP is a process in which the penultimate hop router (the router before the egress router) removes the top label from an MPLS packet before forwarding it to the egress router. This reduces the label stack depth of the packet and relieves the egress router from performing a label lookup operation. In the exhibit, router R3 is the penultimate hop for traffic arriving from router R2 towards router R4. Router R3 will perform a PHP operation, removing the top label from the incoming packet before forwarding it to router R478.

References: PHP Tutorial - W3Schools, PHP: Downloads

To differentiate traffic types for the purpose of prioritization in their Ethernet LAN and IP/MPLS backbone, an operator can use the following three fields:

• Traffic Class (TC): This is a 3-bit field in the MPLS label that can be used to indicate the priority or class of service (CoS) of the packet. The TC field can be mapped to the DSCP field in the IP header or the PCP field in the Ethernet header. The TC field can be used by MPLS routers to apply different per-hop behaviors (PHBs) such as queuing, scheduling, and dropping policies to different traffic classes12.
• DSCP: This is a 6-bit field in the IP header that can be used to mark packets according to the differentiated services (DiffServ) model. The DSCP field can indicate the per-hop behavior (PHB) that the packet should receive at each router along its path. The DSCP field can be mapped to the TC field in the MPLS label or the PCP field in the Ethernet header. The DSCP field can be used by IP routers to provide QoS for different traffic types34.
• PCP: This is a 3-bit field in the Ethernet header that can be used to mark packets according to the IEEE 802.1Q standard. The PCP field can indicate the priority or class of service (CoS) of the packet on an Ethernet LAN. The PCP field can be mapped to the TC field in the MPLS label or the DSCP field in the IP header. The PCP field can be used by Ethernet switches to provide QoS for different traffic types56.

References: MPLS Traffic Engineering - DiffServ-Aware Traffic Engineering, MPLS Traffic Engineering - DiffServ-Aware Traffic Engineering Configuration Guide, Differentiated services - Wikipedia, DSCP and Precedence Values - Cisco, 802.1Q VLAN IDs and Ethernet Interface Types - Juniper Networks, Introduction to Virtual LANs (VLANs) and Tagging - Ubiquiti Support and Help Center

Two statements that are true about router node hardening are:

• Any unnecessary services should be disabled within each context. Router node hardening is a process of securing a router from unauthorized access and attacks by applying various configurations and policies. One of these configurations is to disable any services that are not needed for the router’s functionality or purpose, such as telnet, ftp, http, etc. This reduces the attack surface of the router and prevents potential exploits of these services91.
• Enabling syslog ensures system events are logged to a remote server. Syslog is a protocol that allows a router to send system messages and events to a remote server for logging and analysis. By enabling syslog on a router, network administrators can monitor the router’s activity and performance, troubleshoot problems, detect anomalies, and audit security events101.

References: Cisco Router Hardening Step-by-Step | SANS Institute, Security Hardening Checklist Guide for Cisco Routers/Switches in 10 Steps, CCNA SEC: Router Hardening - Cisco Press