Comprehensive and Detailed Explanation From BIG-IP Administration Data Plane Concepts/Course Guide/topics:

BIG-IP evaluates a new connection against eligible virtual servers using increasingly specific traffic-matching criteria. F5 ' s certification material states that, for BIG-IP 11.3 and later, virtual-server precedence considers destination address first, source address second, and service port third , with the most specific applicable listener taking precedence. F5, Inc.

Option B initially appears attractive because it specifies the exact destination 10.16.2.100:445. However, its source 192.168.5.1/32 restricts that virtual server to traffic originating from that single source. The actual packet originates from 10.10.1.1 , so B is not an eligible match. F5 explicitly documents that the source address setting can restrict a virtual server to packets originating from a defined address or range.

Option C is eliminated because its destination is 10.120.6.10, not 10.16.2.100. Option D is the broad catch-all forwarding virtual (0.0.0.0:any, protocol any). Option A , however, is an applicable TCP forwarding virtual for the requested traffic and is preferred over the generic catch-all forwarding listener.

Study Guide References/Topics: Virtual Server Order of Precedence; Source Address Matching; Forwarding (IP) Virtual Servers; FastL4 Processing; Virtual Server Traffic Matching.

In BIG-IP LTM, a Wildcard virtual server is defined by using a destination IP address of 0.0.0.0. These virtual servers are designed to handle traffic that does not match any more specific Virtual Server destination address.

0.0.0.0 Destination: This address acts as a " catch-all " for IP traffic.

VLAN Specificity: While the destination address is generic, a Wildcard virtual server is typically restricted to a specific VLAN (such as the Internal VLAN) to process outbound traffic from backend servers.

Service Ports: A wildcard virtual server can be configured for a specific port (e.g., 0.0.0.0:80) or for all ports (0.0.0.0:0).

Data Plane Usage: It is commonly used for transparently intercepting outbound traffic for the purpose of Source NAT (SNAT), bandwidth shaping, or directing traffic to a gateway pool.

In a BIG-IP device service cluster , configuration objects such as virtual servers, pools, profiles, and iRules are maintained through configuration synchronization (config-sync) .

Key BIG-IP concepts involved:

Device Service Cluster (DSC) A cluster is a group of BIG-IP devices that share configuration data. One device is typically used to make changes, which are then synchronized to the rest of the group.

Config-Sync Direction Matters

Changes are made on a local device

Those changes must be pushed to the group

The correct operation is “Sync Device to Group”

Why C is correct:

The virtual server was created only on device 1

Other devices in the cluster do not yet have this object

To propagate the new virtual server to all cluster members, the administrator must synchronize device 1 to the group

Why the other options are incorrect:

A. Synchronize the settings of the group to device 1 This would overwrite device 1’s configuration with the group’s existing configuration and may remove the newly created virtual server .

B. Create a new cluster on device 1 The cluster already exists. Creating a new cluster is unnecessary and disruptive.

D. Create a new virtual server on device 2 This defeats the purpose of centralized configuration management and risks configuration drift.

Conclusion:

After creating a new virtual server on a BIG-IP device that is part of a cluster, the administrator must synchronize the configuration from that device to the group so all devices share the same ADC application objects.