ISTQB-CTFL Sample Questions Answers

Statement coverage is a structural coverage metric that measures the percentage of executable statements in the source code that are executed by a test suite1. Decision coverage is another structural coverage metric that measures the percentage of decision outcomes (such as branches or conditions) in the source code that are executed by a test suite1. Decision coverage is a stronger metric than statement coverage, because it requires that every possible outcome of each decision is tested, while statement coverage only requires that every statement is executed at least once2. Therefore, if a test suite achieves 100% decision coverage, it also implies that it achieves 100% statement coverage, because every statement in every branch or condition must have been executed. However, the converse is not true: 100% statement coverage does not guarantee 100% decision coverage, because some branches or conditions may have multiple outcomes that are not tested by the test suite2. For example, consider the following pseudocode:

if (x > 0) then print(“Positive”) else print(“Non-positive”) end if

A test suite that executes this code with x = 1 and x = -1 will achieve 100% statement coverage, because both print statements are executed. However, it will not achieve 100% decision coverage, because the condition x > 0 has only been tested with two outcomes: true and false. The third possible outcome, x = 0, has not been tested by the test suite. Therefore, the test suite may miss a potential bug or error in the condition or the branch.

The other options, such as stale transition coverage, equivalence class coverage, and boundary value coverage, are not guaranteed to be 100% by achieving 100% decision coverage. Stale transition coverage is a structural coverage metric that measures the percentage of transitions between states in a state machine that are executed by a test suite3. Equivalence class coverage is a functional coverage metric that measures the percentage of equivalence classes (or partitions) of input or output values that are tested by a test suite4. Boundary value coverage is another functional coverage metric that measures the percentage of boundary values (or extreme values) of input or output ranges that are tested by a test suite4. These metrics are independent of decision coverage, because they are based on different aspects of the system under test, such as its behavior, functionality, or specification. Therefore, achieving 100% decision coverage does not imply achieving 100% of any of these metrics, and vice versa. References = ISTQB® Certified Tester Foundation Level Syllabus v4.0, Test Coverage in Software Testing - Guru99, Structural Coverage Metrics - MATLAB & Simulink - MathWorks India, Test Design Coverage in Software Testing - GeeksforGeeks.

This answer is correct because static testing and dynamic testing are both types of testing that can be used to highlight issues associated with non-functional characteristics, such as usability, performance, security, reliability, etc. Static testing is a type of testing that involves the analysis of software work products, such as requirements, design, code, or test cases, without executing them. Dynamic testing is a type of testing that involves the execution of software work products, such as code or test cases, using inputs and verifying outputs. Both static testing and dynamic testing can be applied to different test levels and test types, and can use different test techniques and tools, to evaluate the non-functional characteristics of the software product. References: ISTQB Glossary of Testing Terms v4.0, ISTQB Foundation Level Syllabus v4.0, Section 2.2.1.1, Section 2.2.1.2

Checklist-based testing involves using checklists that contain items, such as potential test conditions, that should be tested. These checklists are often based on insights into what is important to the user, potential areas where software might fail, and specific aspects that need to be tested. It provides a structured yet flexible approach to testing, ensuring key areas are covered while allowing testers to use their experience and understanding of the system. Checklist-based testing is not limited to non-functional testing but can be applied to various types of testing, including functional testing.

Equivalence partitioning and boundary value analysis are test design techniques that are most appropriate for testing the login page of a web site. The page contains fields for user name and password, which are input values that can be divided into partitions of equivalent data. Equivalence partitioning is a technique that divides the input data and output results of a software component into partitions of equivalent data. Each partition should contain data that is treated in the same way by the component. Equivalence partitioning can be used to reduce the number of test cases by selecting one representative value from each partition. Boundary value analysis is a technique that tests boundary values between partitions of equivalent data. Boundary values are values at the edge of an equivalence partition or at the smallest incremental distance on either side of an edge. Boundary value analysis can be used to detect defects caused by incorrect handling of boundary conditions. For example, for testing the user name field, we can identify two equivalence partitions: valid user name (existing and correct) and invalid user name (non-existing or incorrect). The boundary values for these partitions are the minimum and maximum length of user name allowed by the system.

Decision table testing and state transition testing are not suitable for testing the login page of a web site, as they are more applicable for testing components that have multiple inputs and outputs that depend on logical combinations of conditions or events. Decision table testing is a technique that shows combinations of inputs and/or stimuli (causes) with their associated outputs and/or actions (effects). State transition testing is a technique that models how a system transitions from one state to another depending on events or conditions.

Exploratory testing and statement coverage are not suitable for testing the login page of a web site, as they are more applicable for testing components that require learning, creativity and intuition or structural analysis. Exploratory testing is an approach to testing that emphasizes learning, test design and test execution at the same time. Exploratory testing relies on the tester’s skills, creativity and intuition to explore the software under test and discover defects. Statement coverage is a type of structural testing that measures how many statements in a program have been executed by a test suite. Statement coverage can be used to assess the adequacy or completeness of a test suite.

Decision coverage and fault attack are not suitable for testing the login page of a web site, as they are more applicable for testing components that have complex logic or potential errors. Decision coverage is a type of structural testing that measures how many decision outcomes in a program have been executed by a test suite. Decision coverage can be used to assess the adequacy or completeness of a test suite. Fault attack is a type of functional testing that deliberately introduces faults into a system in order to provoke failures or errors. Verified References: [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer], Chapter 4, page 34-46; Chapter 5, page 47-48.

Comprehensive and Detailed In-Depth Explanation:

Retrospectives provide value by fostering improvement and collaboration. The correct mapping is:

A2: Team bonding occurs when teams openly discuss issues.

B1: Test effectiveness increases when process improvements are implemented.

C4: Test basis improves by addressing requirement deficiencies.

D3: Cooperation improves through regular review of collaboration.

Data migration testing is a critical part of maintenance testing during the decommissioning of a system. When a system is decommissioned, data often needs to be transferred to another system or archived securely. This process ensures that the data remains intact, accessible, and secure in its new location. Therefore, statement B is true as it aligns with the ISTQB CTFL syllabus guidelines on handling system decommissioning and data preservation​​.

The purpose of a review is to find defects and improve the quality of the work product, not to criticize or blame the author. Reporting defects objectively means describing them factually and constructively, without using negative or emotional language that could offend the author or damage their motivation. This way, the author can take the feedback positively as an effort at improving the product and not as a personal assault. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 138.

When a manager asks when testing will be complete, the most appropriate and informative resource to provide an answer is test progress reports (Option A). Test progress reports contain detailed information on the status of testing activities, including what has been accomplished, what remains to be done, the results of the tests conducted, and any issues or risks that might impact the completion of testing. These reports allow for an informed assessment of the testing progress and estimation of when testing might be completed. Options B, C, and D do not provide the structured, detailed, and specific information required to accurately answer the manager's question about the completion of testing.

Comprehensive and Detailed In-Depth Explanation:

BDD emphasizes collaboration between developers, testers, and business stakeholders to define system behavior in a readable format (A). It typically uses the Given-When-Then syntax. Unlike unit testing (B), BDD is at a higher level of abstraction. It does not focus solely on non-functional testing (C) and encourages early testing rather than post-development validation (D).

Testware is a term that refers to all artifacts produced during the testing process, such as test plans, test cases, test scripts, test data, test results, defect reports, etc. The following statements about testware are correct:

II) All the testware should be subject to Configuration Management. Configuration management is a process that establishes and maintains consistency among work products throughout their life cycle. Configuration management applies to all testware, as it helps ensure their quality and consistency, track their changes and defects, control their versions and access rights, and link them to other artifacts.

III) The testware at the end of the project should be transferred to the organization responsible for maintenance. Maintenance testing is testing performed on a software product after delivery to correct defects or improve performance or other attributes. Maintenance testing requires testware from previous testing activities or phases, such as test cases, test data, test results, etc. Therefore, the testware at the end of the project should be transferred to the organization responsible for maintenance testing, such as support team or maintenance team. The following statements about testware are incorrect:

I) When closing the test activities, all the testware resources can be uninstalled and released. This statement is incorrect, as some testware resources may still be needed for future testing activities or phases, such as maintenance testing or regression testing. Therefore, when closing the test activities, some testware resources should be archived and stored for future use, while others can be uninstalled and released.

IV) The developers are responsible for the correct installation of the testware. This statement is incorrect, as the testers are responsible for the correct installation of the testware. The testers should ensure that they have access to all necessary testware resources and that they are installed and configured properly before starting the test execution. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, Chapter 6, page 58-61.

A new navigation system compared with a previous system is the most suitable application for testing by use cases, because it involves a high level of interaction between the user and the system, and the expected behavior and outcomes of the system are based on the user’s needs and goals. Use cases can help to specify the functional requirements of the new navigation system, such as the ability to enter a destination, select a route, follow the directions, receive alerts, etc. Use cases can also help to compare the accuracy and usability of the new system with the previous system, by defining the success and failure scenarios, the preconditions and postconditions, and the alternative flows of each use case. Use cases can also help to design and execute test cases that cover the main and exceptional paths of each use case, and to verify the satisfaction of the user’s expectations.

The other options are not the most suitable applications for testing by use cases, because they do not involve a high level of interaction between the user and the system, or the expected behavior and outcomes of the system are not based on the user’s needs and goals. A billing system used to calculate monthly charge based on a large number of subscriber parameters is more suitable for testing by data-driven testing, which is a technique for testing the functionality and performance of a system or component by using a large set of input and output data. The ability of an antivirus package to detect and quarantine a new threat is more suitable for testing by exploratory testing, which is a technique for testing the functionality and security of a system or component by using an informal and flexible approach, based on the tester’s experience and intuition. The suitability and performance of a multimedia (audio video based) system to a new operating system is more suitable for testing by compatibility testing, which is a technique for testing the functionality and performance of a system or component by using different hardware, software, or network environments. References = CTFL 4.0 Syllabus, Section 3.1.1, page 28-29; Section 4.1.1, page 44-45; Section 4.2.1, page 47-48.

In Agile teams using the planning poker technique for estimating user stories, it is common practice to have further discussions and rounds of estimation if there is a significant discrepancy in the initial estimates. This helps in reaching a consensus and ensures that all team members understand the complexity and requirements of the user story. According to the ISTQB CTFL syllabus, planning poker involves discussions to clarify differences in estimates, especially when there is a wide range of values selected. By having Memb6 and Memb4, who provided the most pessimistic and optimistic estimates, explain their reasoning, it fosters a deeper understanding and encourages the team to converge towards a more accurate and agreed-upon estimate.

To apply one-dimensional equivalence partitioning to the ID requirement, we need to consider each condition individually:

Length of the ID: Valid partitions (5-10 characters), Invalid partitions (less than 5, more than 10) = 3 partitions.

Type of characters: Valid partitions (alphanumeric), Invalid partitions (non-alphanumeric) = 2 partitions.

First character: Valid partitions (letter), Invalid partitions (non-letter) = 2 partitions. Adding these partitions, we get a total of 3 (length) + 2 (character type) + 2 (first character) = 7 partitions. Thus, the correct answer is A​​.

Comprehensive and Detailed In-Depth Explanation:

Testing and debugging are separate but related activities. Testing executes the software to identify failures that result from defects (A). Debugging is the developer's responsibility and involves finding the cause of a failure (defect), analyzing it, and fixing the defect. The ISTQB syllabus explicitly differentiates these activities. Testing does not modify the software, whereas debugging does.

A typical test plan includes various elements, such as resource requirements, test completion criteria, and suspension/resumption criteria. However, the list of product risks that have not been fully mitigated is generally not included in the test plan but rather in the risk management documentation.

The test plan focuses on planning and executing tests, including resource allocation and defining criteria for test suspension and resumption.

While risk management is crucial, unmitigated risks are typically documented in risk logs or separate risk management plans.

To achieve 100% statement coverage, we need to design test cases that ensure every statement in the given pseudo-code is executed at least once. Analyzing the pseudo-code, we notice that there are conditions based on two variables: Gender and Age. To cover all statements, we need to consider the paths that lead to each assignment of the Shoe Size variable.

Gender = Boy, Age <= 3 (Shoe Size assignment is not reached, but the condition is evaluated)

Gender = Boy, Age > 3 AND Age < 5 (Shoe Size = 1)

Gender = Boy, Age >= 5 AND Age < 7 (Shoe Size = 2)

Gender != Boy, Age <= 3 (Again, Shoe Size assignment is not reached, but the condition is evaluated)

Gender != Boy, Age > 3 AND Age < 5 (Shoe Size = 0)

Gender != Boy, Age >= 5 AND Age < 7 (Shoe Size = 1)

However, upon closer inspection, we see that tests 1 and 4 do not contribute to statement coverage as they do not lead to a Shoe Size assignment. Therefore, we only need 4 test cases to achieve 100% statement coverage, making option B the correct answer.

According to the decision table in the image, a Preferred Guest Card holder with a Silver room is eligible for an upgrade to Gold Luxury (YES), while a non-Preferred Guest Card holder, regardless of room type, is not eligible for any upgrade (NO). Therefore, Customer A (a Preferred Guest Card holder with a Silver room) would be offered an upgrade to Gold Luxury, and Customer B (a non-Preferred Guest Card holder with a Platinum room) would not be offered any upgrade. References = The answer is derived directly from the decision table provided in the image; specific ISTQB Certified Tester Foundation Level (CTFL) v4.0 documents are not referenced.

Confirmation testing, also known as retesting, is conducted to verify that specific defects have been fixed. Regression testing, on the other hand, is performed to ensure that recent changes have not adversely affected existing features of the software. Both types of testing are crucial for maintaining the integrity and quality of the software after modifications​​.

The activities of checking test results and logs against specified coverage criteria, assessing the level of component or system quality based on test results and logs, and determining whether more tests are needed fall under the category of test monitoring and control. This phase involves ongoing assessment and adjustment of the test activities to ensure they meet the test objectives and quality goals​​.

Equivalence classes partitioning is a technique that divides the input data and output results of a software component into partitions of equivalent data. Each partition should contain data that is treated in the same way by the component. Equivalence classes partitioning can be used to reduce the number of test cases by selecting one representative value from each partition. For the ZIP code field, there are four equivalence classes based on the given rules:

Valid ZIP code format and valid ZIP code value (e.g., 12345)

Valid ZIP code format and invalid ZIP code value (e.g., 99999)

Invalid ZIP code format and valid ZIP code value (e.g., 1234)

Invalid ZIP code format and invalid ZIP code value (e.g., ABCDE) Therefore, four test cases are required to test this field, one for each equivalence class. Verified References: [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer], Chapter 4, page 37-38.

The features of the test object to be tested and those excluded from the testing represent information that is usually included in a test plan and, in the given test plan, it is more likely to be specified within “Test Scope” rather than in the other two sections mentioned. The test scope defines the boundaries and limitations of the testing activities, such as the test items, the features to be tested, the features not to be tested, the test objectives, the test environment, the test resources, the test assumptions, the test risks, etc. The test scope helps to establish a common understanding of what is included and excluded from the testing, and to avoid ambiguity, confusion, or misunderstanding among the stakeholders. The other two sections, “Testing Communication” and “Stakeholders”, are also important parts of a test plan, but they do not directly address the features of the test object. The testing communication describes the methods, frequency, and responsibilities for the communication and reporting of the testing progress, status, issues, and results. The stakeholders identify the roles and responsibilities of the people involved in or affected by the testing activities, such as the test manager, the test team, the project manager, the developers, the customers, the users, etc. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.1, Test Planning1

ISTQB® Glossary of Testing Terms v4.0, Test Plan, Test Scope2

An incident report is a document that records the details of an incident. An incident report typically contains the following items:

Identifier: A unique identifier for the incident report

Summary: A concise summary of the incident

Description: A detailed description of the incident, including the steps to reproduce it, the expected and actual results, and any relevant screenshots or logs

Severity: The degree of impact that the incident has on the system

Priority: The level of urgency for resolving the incident

Status: The current state of the incident, such as new, open, resolved, closed, etc.

Resolution: The action taken to resolve the incident, such as fix, workaround, reject, etc. Based on the information given in the question, the tester would be able to write down all of these items except for the test case identifier. A test case identifier is a unique identifier for a test case that is used to link it to other test artifacts, such as test plans, test scripts, test results or incident reports. However, since the tester is performing exploratory testing, there is no predefined test case that can be associated with the incident. Exploratory testing is an approach to testing that emphasizes learning, test design and test execution at the same time. Exploratory testing relies on the tester’s skills, creativity and intuition to explore the software under test and discover defects. Exploratory testing does not use formal test cases or scripts, but rather uses test charters or missions that guide the tester’s actions and objectives. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, Chapter 3, page 32-33; Chapter 5, page 47-48.

The critical information missing from the defect report is a detailed description of the defect to enable reproduction. A clear and concise description of the steps taken to reproduce the defect is essential for developers to understand the context and to be able to replicate the issue in their environment. Without this information, it can be challenging to diagnose and fix the defect. The ISTQB CTFL syllabus emphasizes the importance of providing all necessary details in a defect report to facilitate effective communication and resolution.

System testing is a level of testing performed to evaluate the behavior and quality of a whole software product or system. System testing can include various types of testing, such as:

I) Usability testing: A type of testing that evaluates how easy, efficient and satisfying it is to use the software product or system from the user’s perspective.

II) Requirements based scenarios testing: A type of testing that verifies that the software product or system meets its specified requirements or user stories by executing realistic scenarios or workflows. System testing does not include the following types of testing, as they are more suitable for lower levels of testing, such as unit testing or integration testing:

III) Testing parts of the code in isolation: A type of testing that verifies the functionality and quality of individual software components or units by isolating them from other components or units.

IV) Correct order of parameters in API calls: A type of testing that verifies the functionality and quality of software components or units that communicate with each other through application programming interfaces (APIs) by checking the correct order and format of parameters in API calls. Verified References: [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer], Chapter 2, page 20-21; Chapter 4, page 34-35.

Pair reviews are informal and typically involve two people reviewing the work product together, often in an informal setting. Walkthroughs are more formal and aim to educate stakeholders and evaluate the product, serving the dual purpose of improving the product and training participants. Technical reviews have a strong focus on improving the product's quality, often involving technical stakeholders. Inspections are the most formal review type and are aimed primarily at detecting defects.

A software bug can cause harm to a company by directly affecting its operations, reputation, user satisfaction, and financials. Option D, "When calculating the final price in a shopping list, the price of the last item is not added," describes a defect that directly impacts the core functionality of a financial transaction, potentially leading to financial loss and customer dissatisfaction. This can have severe implications for the company's credibility and revenue. Options A, B, and C describe bugs that, while potentially annoying, do not have the same direct impact on the company's core operations and financial integrity as option D.

The requirement specifies that a bonus should be paid if the total amount of sales (TAS) made during the year is 300,000€ or more. The software incorrectly implements this requirement with "IF (TAS = 300,000)" instead of "IF (TAS >= 300,000)". Using boundary value analysis (BVA), which is a common technique in software testing, the three test cases provided (TC1 = 299,999, TC2 = 300,000, and TC3 = 300,001) cover the critical boundary values around the condition.

TC1 tests just below the boundary (299,999),

TC2 tests exactly at the boundary (300,000),

TC3 tests just above the boundary (300,001).

Since the software incorrectly checks for TAS equal to 300,000, only TC2 will fail because the condition is exactly met and highlights the incorrect implementation of the decision logic.

Debugging is the process of finding, analyzing and removing the causes of failures in software. Debugging is not considered part of testing, but rather a development activity that can involve testing. Debugging is not intended to find as many defects as possible, but rather to fix the specific failure that was observed. Debugging is usually performed by developers, not by test engineers. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, Chapter 1, page 6.

This answer is correct because product risks are risks that affect the quality of the software product, such as defects, failures, or non-compliance with requirements or standards. Project risks are risks that affect the project’s schedule, budget, resources, or scope, such as delays, cost overruns, skill gaps, or scope changes. In this case, [I] and [IV] are product risks, as they relate to the accessibility and security of the software product, which are quality attributes. [II] and [III] are project risks, as they relate to the delivery time and the test automation skills of the test team, which are project factors. References: ISTQB Glossary of Testing Terms v4.0, ISTQB Foundation Level Syllabus v4.0, Section 2.1.1.1

The set of test inputs that achieve the relatively highest equivalence partition coverage for grading students is option D: 69, 79, 80, 89, 90. This set effectively tests the boundaries between each grade category, ensuring that the grading system accurately transitions from one grade to another at the correct thresholds​ (ISTQB Main Web)​.

The statement that "static testing increases development costs and time" is NOT correct. Static testing actually helps to reduce development costs and time by identifying defects early in the development process before dynamic testing is performed. Early detection of defects reduces the cost and effort required to fix them and prevents the propagation of defects to later stages, thus reducing overall testing and development costs.

A technical review is a type of formal review that involves a team of technical experts who evaluate a software product against a set of predefined quality criteria. A technical review is suitable for ensuring high quality and technical correctness of complex or critical software components, such as algorithms, architectures or designs. A technical review is not a walkthrough, which is an informal review led by the author of the work product. A technical review is not an informal review, which is a review that does not follow a defined process and has no formal entry or exit criteria. A technical review is not a management review, which is a type of formal review that focuses on business aspects and project progress. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, Chapter 3, page 29-30.

Metrics can be collected during and at the end of testing activities to assess various aspects including progress against the planned schedule and budget, the current quality of the test object, the adequacy of the test approach, and the effectiveness of the test activities with respect to the objectives. Collecting these metrics helps in understanding the overall performance and quality of the testing process​​.

 Static testing is a form of testing that does not involve executing the software or system under test. It includes activities such as reviews, inspections, walkthroughs, and analysis of documents, code, and models. Static testing can find defects early in the development process, before they become more expensive and difficult to fix in later stages. Static testing can also improve the quality of the software or system by preventing defects from being introduced in the first place. Static testing can complement dynamic testing, which involves executing the software or system under test and checking the results against expected outcomes. Dynamic testing can find defects that static testing may miss, such as performance, usability, or integration issues. However, dynamic testing alone is not sufficient to ensure quality, as it may not cover all possible scenarios, inputs, or paths. Therefore, a test manager who decides to skip static testing is making a wrong decision, as he or she is ignoring the benefits of static testing and relying solely on dynamic testing, which may not be effective or efficient enough to find and prevent defects. References = ISTQB Certified Tester Foundation Level Syllabus, Version 4.0, 2018, Section 2.1.1, page 14; ISTQB Glossary of Testing Terms, Version 4.0, 2018, page 36; ISTQB CTFL 4.0 - Sample Exam - Answers, Version 1.1, 2023, Question 3, page 9.

Boundary value analysis is a technique that tests boundary values between partitions of equivalent data. Boundary values are values at the edge of an equivalence partition or at the smallest incremental distance on either side of an edge. Boundary value analysis can be applied to both input and output values. Based on the given requirement, we can identify two input values: age and weekend. Age should be an integer of 0 or above, and weekend means Friday to Sunday inclusive. The following statement is not correct:

A) Thursday is a valid input boundary value. This statement is not correct, as Thursday is not a boundary value for the input weekend. The boundary values for the input weekend are Friday and Sunday, as they are at the edge of the equivalence partition that represents weekend days. The following statements are correct:

B) A minimum of 6 valid test cases are derived from boundary value analysis based on input age. This statement is correct, as we can derive six valid test cases based on input age by using the minimum and maximum values for each equivalence partition defined by the requirement. The equivalence partitions for input age are: under 7 (0 to 6), 7 to 13 inclusive (7 to 13), and greater than 65 (66 and above). The minimum and maximum values for each partition are: 0 and 6, 7 and 13, and 66 and any value above it.

C) $3.01 is a valid output boundary value. This statement is correct, as $3.01 is a boundary value for the output additional fee. The additional fee can have four possible values depending on the input age: $0 (for visitors aged under 7), $2.40 (for visitors aged 7 to 13 inclusive with a 20% discount), $1.50 (for visitors aged greater than 65 with a 50% discount), and $3 (for visitors aged between 14 and 65). The boundary values for the output additional fee are $0 and $3, as they are at the edge of an equivalence partition or at the smallest incremental distance on either side of an edge. Therefore, $3.01 is a valid output boundary value, as it is at the smallest incremental distance above $3.

D) 7 and 13 are boundary values for the equivalence partition including age 10. This statement is correct, as 7 and 13 are boundary values for the equivalence partition that represents visitors aged 7 to 13 inclusive. This partition includes age 10, which is an internal value within the partition. Verified References: [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer], Chapter 4, page 37-38.

Testing can contribute to higher quality by helping to measure the quality of software. Quality is defined as the degree to which a component or system satisfies specified requirements and customer or user needs and expectations. Testing is a process of evaluating a component or system by applying inputs and observing outputs, and comparing them with expected results. Testing can help to measure the quality of software by providing information on its functionality, performance, usability, security, reliability, etc. Testing can also help to identify and report defects in software, which can lead to improvement actions and quality assurance activities. The other options are not accurate descriptions of how testing can contribute to higher quality. Testing does not ensure that remaining defects are documented, but rather that detected defects are reported. Testing does not remove errors in software, but rather finds defects in software behavior or quality. Testing does not eliminate the risk with software, but rather assesses and manages the risk with software. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 3.

The test engineer should re-run the tests, in order to ensure that new defects have not been introduced by the fix. This is also known as regression testing, which is a type of testing that verifies that previously tested software still performs correctly after a change. Regression testing helps to detect any side effects or unintended consequences of a fix or a modification. The other options are incorrect reasons for re-running the tests. The test engineer should not re-run the tests, as they have already been run, and results recorded, because this ignores the possibility of new defects caused by the fix. The test engineer should not re-run the tests, they should be part of the developer tests, because this assumes that developer tests are sufficient and reliable, which may not be true. The test engineer should not re-run the tests, because the defect shows that the test cases need to be updated, because this does not address the impact of the fix on other test cases or functionalities. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 41.

The most important report improvement for the given incident report would be to add information about which web browser was used when the defect was detected. This information is relevant for reproducing and debugging the defect, as different web browsers may have different behaviors or compatibility issues with the web application. The other options are less important or irrelevant for the incident report. The developer who should fix the bug can be assigned by the project manager or the defect tracking system, not by the tester who reports the defect. The time stamp when the incident happened is not very useful, as it does not indicate the cause or the frequency of the defect. The impact analysis is not part of the incident report, but rather of the risk assessment or prioritization process. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 140.

According to the ISTQB Glossary of Testing Terms, Version 4.0, 2018, page 18, a failure is “an event in which a component or system does not perform a required function within specified limits”. In this case, the calculator software does not perform the required function of calculating the correct result for 5+6 within the specified limits of accuracy and precision. Therefore, this is an example of a failure.

The other options are incorrect because:

A mistake is “a human action that produces an incorrect result” (page 25). A mistake is not an event, but an action, and it may or may not lead to a failure. For example, a mistake could be a typo in the code, a wrong assumption in the design, or a misunderstanding of the requirement.

A fault is “a defect in a component or system that can cause the component or system to fail to perform its required function” (page 16). A fault is not an event, but a defect, and it may or may not cause a failure. For example, a fault could be a logical error in the code, a missing specification in the design, or a contradiction in the requirement.

An error is “the difference between a computed, observed, or measured value or condition and the true, specified, or theoretically correct value or condition” (page 15). An error is not an event, but a difference, and it may or may not result in a failure. For example, an error could be a rounding error in the calculation, a measurement error in the observation, or a deviation error in the condition.

References = ISTQB Glossary of Testing Terms, Version 4.0, 2018, pages 15-18, 25; ISTQB CTFL 4.0 - Sample Exam - Answers, Version 1.1, 2023, Question 96, page 34.

A typical entry criterion for testing is the availability of testable requirements. Testable requirements provide a basis for designing and executing test cases. Without clear and testable requirements, it is challenging to determine what needs to be tested and to create effective test cases. Entry criteria ensure that the necessary preconditions are met before testing begins, which helps in conducting efficient and effective testing.

Testers are typically involved in creating detailed test execution schedules, among other tasks such as designing tests, executing tests, and logging defects. Creating a test strategy and test policy, promoting and advocating the test team, and introducing metrics are typically responsibilities of test managers or senior roles.

In the ISTQB Certified Tester Foundation Level (CTFL) v4.0 syllabus, the responsibilities of testers include creating test cases, setting up test​ (ISTQB not-for-profit association)​nts, executing tests, and reporting defects, which align with creating detailed test execution schedules【6†source】.

A key skill for testers is the ability to use various tools to automate repetitive tasks, enhancing the efficiency and effectiveness of testing processes. This includes tools for test execution, test management, and defect tracking. The ISTQB CTFL Syllabus v4.0 emphasizes the importance of using tools to improve productivity and reduce manual effort in repetitive testing tasks, making this a critical skill for testers​​.

The principle of early testing is applicable to all recognized software development models, including sequential, iterative, and incremental models. Starting test activities early in the lifecycle helps in identifying and addressing defects as soon as possible, which can save time and costs by preventing defects from propagating to later stages of development. This proactive approach enhances the overall quality and efficiency of the software development process. Reference: ISTQB CTFL Syllabus V4.0, Section 1.3

The minimum number of test cases needed to cover every unique sequence of up to 3 states/2 transitions starting in the “Start” state and ending in the “End” state is 4. This is because there are 4 unique sequences of up to 3 states/2 transitions starting in the “Start” state and ending in the “End” state:

Start -> Bet -> End

Start -> Deal -> End

Start -> 1st Deal -> End

Start -> 2nd Deal -> End References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents.

In defect reporting, the attribute that indicates the degree of impact that the defect has on the system is the severity. Severity reflects the seriousness of the defect in terms of its impact on the operation of the system, ranging from minor issues that do not significantly affect the system's functionality to critical defects that can cause system failure. Therefore, option B is the correct answer​​.

A correct list of boundary values for the P input should include the minimum and maximum values of the valid range (15 and 350), as well as the values just below and above the boundaries (14 and 351). Boundary value analysis is a test design technique that involves testing the values at or near the boundaries of an input domain or output range, as these values are more likely to cause errors than values in the middle. Option B satisfies this condition, as it has all four boundary values (14, 15, 350, 351). Option A has two values from the same equivalence class (1000 and 99999), option C has two values outside the range (999 and 100000), and option D has no boundary values at all. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 34.

In the context of software testing, the ISTQB Certified Tester Foundation Level (CTFL) v4.0 differentiates between "validation" and "verification" based on their respective focuses in the software development lifecycle. Verification is the process of evaluating a system or component to determine whether the products of a given development phase satisfy the conditions imposed at the start of that phase. In simpler terms, verification is about checking the product against the specified requirements to ensure it was built correctly. Validation, on the other hand, involves evaluating a system or component during or at the end of the development process to determine whether it meets specified requirements for its intended use. This means validation is about ensuring the product fulfills its intended use and meets the needs of the user.

Exploratory testing is an approach to testing that emphasizes learning, test design and test execution at the same time. Exploratory testing relies on the tester’s skills, creativity and intuition to explore the software under test and discover defects. Exploratory testing is suitable for a new project with little documentation and high probability for bugs, as it can help uncover unknown requirements, assumptions and risks. Exploratory testing is not requirements based testing, which is an approach to testing that derives test cases from documented requirements or specifications. Requirements based testing is not feasible for a new project with little documentation, as it requires clear and complete requirements to be available. Exploratory testing is not metric based approach, which is an approach to testing that uses quantitative measures to monitor and control the testing process and evaluate the quality of the software product. Metric based approach is not effective for a new project with high probability for bugs, as it may not capture all aspects of quality and may lead to false confidence or unrealistic expectations. Exploratory testing is not regression testing, which is an approach to testing that verifies that previously tested software still performs correctly after changes. Regression testing is not relevant for a new project with no previous versions or baselines. Verified References: [A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer], Chapter 5, page 47-48.

The ISTQB CTFL syllabus identifies several causes for defects in software. One prominent reason, as highlighted in the curriculum, is the pressure and rush to meet tight deadlines, which can lead to insufficiently reviewed or tested code being moved into further stages of testing or production. This scenario describes rushing to meet a deadline as a potential cause for defects because it may compromise the thoroughness of code development and testing.

Comprehensive and Detailed In-Depth Explanation:

Statement coverage strategy prioritizes test cases with higher statement coverage first, while resolving dependencies before execution.

TC60 (7%) has the highest coverage but depends on REQ 1, so it should be executed after its dependency is covered.

TC80 (6%) depends on REQ 2, so it should be prioritized after TC40 (REQ 2).

TC40 (5%) and TC90 (5%) should be executed early.

Lower coverage test cases (TC10, TC70, TC30, TC20) should come last.

Thus, the correct order is {TC 60; TC 80; TC 40; TC 90; TC 50; TC 10; TC 70; TC 30; TC 20} (D).

The Testing Quadrants model helps Agile teams by categorizing different types of tests and their purposes. This differentiation helps test managers explain the testing strategy to all stakeholders, ensuring everyone understands the scope and objectives of each test type. This model aids in planning, executing, and tracking testing activities across different quadrants, making it easier to align with stakeholders' expectations and project goals. Reference: ISTQB CTFL Syllabus V4.0, Section 5.1.7

A product risk is a risk that affects the quality or timeliness of the software product being developed or tested1. Product risks are related to the requirements, design, implementation, verification, and maintenance of the software product2.

The risk of the sub-contractor failing to meet his commitment is a product risk, as it could cause a delay in the completion of the testing required for the current cycle, which in turn could affect the release date of the product. The release date is an important aspect of the product quality, as it reflects the customer satisfaction and the market competitiveness of the product3.

The other options are not correct because:

A. It is not true that any risk associated with development timeline is a product risk. Some risks could be project risks, which are risks that affect the management or control of the software project, such as budget, resources, schedule, or communication1. For example, a risk of losing a key project stakeholder is a project risk, not a product risk.

B. It is not true that the risk is no longer a risk for the Test Manager since an independent party is managing it. The Test Manager is still responsible for ensuring that the testing activities are completed according to the test plan and the quality objectives4. The Test Manager should monitor and control the sub-contractor’s performance and communicate with him regularly to identify and mitigate any potential issues or deviations5.

C. It is not clear what is meant by “object” in this option, but it could be interpreted as the software system under test or the test object6. In any case, the risk is not an object risk, as it does not affect the successful completion of the object, but rather the successful completion of the testing of the object. An object risk could be a risk that affects the functionality, reliability, usability, efficiency, maintainability, or portability of the software system under test2. For example, a risk of the software system having a high complexity or a low testability is an object risk, not a product risk.

References =

1 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 97

2 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 98

3 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 99

4 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 100

5 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 101

6 ISTQB® Certified Tester Foundation Level Syllabus v4.0, 2023, p. 102

Component testing (also known as unit testing or module testing) is a level of testing that focuses on verifying the functionality and quality of individual software components (such as modules, classes, functions, methods, etc.). Component testing mainly tests interfaces and interaction between components, as well as internal logic and data structures of the components. Component testing may be applied using a test-first approach (such as test-driven development or behavior-driven development), where tests are written before the code is implemented. Component testing does not identify defects in modules and classes, as this is a result of component testing, not an objective. Simulators and stubs may be required for component testing, as they can simulate or replace missing or incomplete components or external systems that are needed for testing. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 19.

Boundary value analysis is not an experience-based technique, but rather a specification-based technique (also known as black-box technique). Experience-based techniques are techniques that rely on the tester’s knowledge and intuition to derive and select test cases based on their experience with similar systems, technologies, domains, risks, etc. Some examples of experience-based techniques are error guessing, exploratory testing, fault attack, checklist-based testing, etc. Specification-based techniques are techniques that rely on the tester’s analysis and interpretation of the requirements or specifications of the system under test to derive and select test cases based on some criteria or rules. Some examples of specification-based techniques are equivalence partitioning, boundary value analysis, decision table testing, state transition testing, etc. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 31.

Statements II, III and V are true about test reports. Test reports are documents that provide information on the results and status of testing activities for a given period or phase. Test reports should give stakeholders information as basis for decisions, such as whether to release the software product, whether to continue testing, whether to change the scope or priorities of testing, etc. Test reports should summarize what happened through a period of testing, such as what test cases were executed, what defects were found, what risks were identified, what issues were encountered, what achievements were made, etc. Test reports should include information about remaining risks, such as what defects are still open, what test cases are still pending, what functionalities are still untested, what uncertainties are still unresolved, etc. Statements I and IV are not true about test reports. Test reports do not need to be approved by the test team, the development team, or the customer, unless it is specified by the test policy or the test plan. Test reports only need to be reviewed and verified by the test leader or the test manager before being distributed to the intended recipients. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 141.

 A correct list of boundary values for the age input should include the minimum and maximum values of each age group (0, 12, 13, 18), as well as the values just below and above each boundary (-1, 19). Boundary value analysis is a test design technique that involves testing the values at or near the boundaries of an input domain or output range, as these values are more likely to cause errors than values in the middle. Option A satisfies this condition, as it has all six boundary values (-1, 0, 12, 13, 18, 19). Option B has two values from the same equivalence class (12 and 13), option C has only four boundary values (0, 12, 18, 19), and option D has no boundary values at all. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 34.

Comprehensive and Detailed In-Depth Explanation:

Static analysis requires access to work products like source code, models, or documentation, making it impossible to analyze Commercial off-the-shelf (COTS) software (A) because its source code is typically unavailable. Static analysis is applicable to source code (B), BPMN models (C), and UML diagrams (D).

In a formal review process, the recorder's role is typically responsible for documenting the findings of the review team, including action items, decisions, and recommendations. This ensures that there is an accurate record of what was discussed and agreed upon, facilitating follow-up and continuous improvement. Therefore, statement C is correct as per the ISTQB CTFL syllabus​​.

Good traceability between the test basis and test work products provides several advantages: i. Analyzing the impact of changes: Traceability allows for easy identification of which parts of the test work products will be affected by changes in the requirements or design, facilitating impact analysis. iv. Making testing auditable: Traceability ensures that there is a clear connection between the requirements and the test cases, which makes the testing process auditable and provides evidence that all requirements have been tested​​.

In a formal review, the roles involved typically include the author, management, facilitator (also known as moderator), review leader, reviewers, and scribe. Each role has specific responsibilities to ensure the effectiveness and efficiency of the review process:

The author creates and refines the work product being reviewed.

Management allocates resources and supports the review process.

The facilitator manages the review meeting, ensuring it proceeds smoothly.

The review leader plans the review and ensures it meets its objectives.

Reviewers examine the work product to identify defects.

The scribe records issues raised during the review meeting​​.

Comprehensive and Detailed In-Depth Explanation:

Exhaustive testing (testing all input combinations) is practically impossible except in trivial cases (C). Instead, testers focus on risk-based, prioritized, and efficient test techniques. The seven principles of testing in the ISTQB syllabus highlight that exhaustive testing is infeasible, and therefore, techniques such as equivalence partitioning, boundary value analysis, and risk-based testing are used to optimize test coverage.

This answer is correct because a typical objective of testing is to ensure that a software has been tested using a combination of test techniques, such as black-box, white-box, or experience-based techniques, that are appropriate for the test objectives, test levels, and test types. Testing using a combination of test techniques can increase the effectiveness and efficiency of testing, as different techniques can target different aspects of the software quality, such as functionality, usability, performance, security, reliability, etc. Testing using a combination of test techniques can also reduce the risk of missing defects that could be detected by one technique but not by another. References: ISTQB Foundation Level Syllabus v4.0, Section 2.3.1.1, Section 2.3.2

Component integration tests are designed to verify the interactions and interfaces between integrated components. These tests should be carried out after component testing (where individual components are tested in isolation) but before system testing (where the entire system is tested as a whole). This ensures that any issues arising from the integration of components are identified and resolved early in the testing process, making option D the correct answer​​.

The key difference between the mindsets for test activities and development activities lies in the objectives: a tester is primarily concerned with finding defects to ensure product quality, while a developer focuses on designing and building solutions. This distinct focus helps ensure thorough quality checks and balances within the software development life cycle​ (ISTQB not-for-profit association)​.

Option D correctly explains what is represented by the lines A, B and the axes X, Y in a testing metrics chart. According to option D:

X-axis represents Time

Y-axis represents Count

Line A represents Number of open bugs

Line B represents Total number of executed tests

This information is essential in understanding and analyzing the testing metrics of a completed project.

This answer is correct because the whole-team approach is a way of working in agile projects where all team members share the responsibility for the quality of the product, and collaborate on delivering value to the customer. The whole-team approach involves testers, developers, business analysts, product owners, and other stakeholders in planning, designing, developing, testing, and delivering the product. The whole-team approach fosters communication, feedback, learning, and continuous improvement within the team. References: ISTQB Glossary of Testing Terms v4.0, ISTQB Foundation Level Syllabus v4.0, Section 3.1.1.1

This answer is correct because code-related white-box test techniques are test design techniques that use the structure of the code to derive test cases. They provide an objective measure of coverage, such as statement coverage, branch coverage, or path coverage, which indicate how much of the code has been exercised by the test cases. Code-related white-box test techniques can be used to complement black-box test techniques, which are test design techniques that use the functional or non-functional requirements of the system or component to derive test cases. By combining both types of techniques, testers can increase their confidence in the code and find more defects. References: ISTQB Glossary of Testing Terms v4.0, ISTQB Foundation Level Syllabus v4.0, Section 2.3.2.2

A test status report is a document that provides a snapshot of the testing activities and their progress during a particular period. It should include information about any impediments encountered during the test execution and the actions taken to resolve them, which helps stakeholders understand the challenges and how they were addressed​​ .

Option B describes an activity related to test completion rather than ongoing status reporting. Option C is incorrect because the structure and contents of the report may vary based on the audience's needs. Option D, while important, is not the primary purpose of a test status report, which focuses more on the current status and impediments.

In an incident report, essential details provide context and facilitate the investigation and resolution of the incident. The missing elements in the given incident report are:

I. Identification or configuration of the application: This detail is crucial as it specifies which version or configuration of the application is affected, helping in reproducing the issue. IV. The actions and/or conditions that came before pressing the button: Understanding the sequence of actions leading to the issue is vital for replicating and diagnosing the problem.

The name of the developer (II) and the recommendation of the developer (III) are not typically included in an incident report as they do not contribute to identifying or resolving the incident. The focus is on the incident's details, reproduction steps, and the system's state rather than on personnel or proposed solutions at this stage. Therefore, option B, which includes both I and IV, is the correct answer.

This answer is correct because a walkthrough is a type of review where the author of the work product leads the review process and explains the work product to the reviewers. The reviewers are not required to prepare for the review in advance, and the main objective of the walkthrough is to establish a common understanding of the work product and to identify any major defects or issues. A walkthrough is usually informal and does not follow a defined process or roles. In this case, the review for a high-level architectural document written by a software architect matches the characteristics of a walkthrough. References: ISTQB Glossary of Testing Terms v4.0, ISTQB Foundation Level Syllabus v4.0, Section 2.4.2.2

Failures can be caused by defects, but also by environmental conditions. A failure is an event in which the software system does not perform a required function or performs a function incorrectly, according to the expected behavior. A defect is a flaw in the software system or a deviation from the requirements or the specifications, that may cause a failure. However, not all failures are caused by defects, as some failures may be caused by environmental conditions, such as hardware malfunctions, network interruptions, power outages, incompatible configurations, etc. Environmental conditions are factors that affect the operation of the software system, but are not part of the software system itself. The other statements are false, because:

A defect does not always produce a failure, while a bug always produces a failure. This statement is false, because a defect may or may not produce a failure, depending on the inputs, the outputs, the states, or the scenarios of the software system, and a bug is just another term for a defect, so it has the same possibility of producing a failure as a defect. For example, a defect in a rarely used feature or a hidden branch of the code may never produce a failure, while a defect in a frequently used feature or a critical path of the code may produce a failure often. A bug is not a different concept from a defect, but rather a synonym or a colloquial term for a defect, so it has the same definition and implications as a defect.

A defect may cause a failure which, when occurring, always causes an error. This statement is false, because an error is not a consequence of a failure, but rather a cause of a defect. An error is a human action or a mistake that produces a defect in the software system, such as a typo, a logic flaw, a requirement misunderstanding, etc. An error is not observable in the software system, but rather in the human mind or the human work products, such as the code, the design, the documentation, etc. A failure is not a cause of an error, but rather a result of a defect, which is a result of an error. For example, an error in the code may cause a defect in the software system, which may cause a failure in the software behavior.

Bugs are defects found during component testing, while failures are defects found at higher test levels. This statement is false, because bugs and failures are not different types of defects, but rather different terms for defects and their manifestations. As mentioned before, bugs are just another word for defects, and failures are the events in which the software system does not perform as expected due to defects. Bugs and failures can be found at any test level, not only at component testing or higher test levels. Test levels are the stages of testing that correspond to the levels of integration of the software system, such as component testing, integration testing, system testing, and acceptance testing. Defects and failures can occur and be detected at any test level, depending on the test objectives, the test basis, the test techniques, and the test environment. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.1.2, Testing and Quality1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.1, Testing Principles1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.3.1, Testing in Software Development Lifecycles1

ISTQB® Glossary of Testing Terms v4.0, Failure, Defect, Bug, Environmental Condition, Error, Test Level2

Achieving full code coverage does not guarantee that the component or system is fully tested or free of defects. Code coverage metrics indicate the extent to which the source code has been tested, but they do not account for the quality of the tests or whether all possible scenarios have been considered. Other types of testing, including functional, performance, and security testing, are necessary to ensure comprehensive testing. The ISTQB CTFL Syllabus v4.0 highlights that while high code coverage is beneficial, it does not equate to complete testing​​.

Comprehensive and Detailed In-Depth Explanation:

The planning phase of the review process (C) includes defining the review’s purpose, scope, and exit criteria to ensure alignment. Option A is part of the defect management phase, B happens during individual preparation, and D takes place in the review meeting.

Static analysis involves analyzing the software's code, design, and structure without executing the program. It can uncover various types of defects, including security vulnerabilities (II) and non-conformance to specifications and standards (III). However, static analysis cannot replace dynamic testing (I), which involves executing the software to observe its behavior under various conditions. Dynamic testing can identify failures that static analysis cannot, such as those related to runtime issues and interaction between different parts of the software. Statement IV is false because static analysis does not detect failures; it detects defects. Failures are observed when the software is executed, which is beyond the scope of static analysis.

An inspection is a type of review that follows a defined process with formal entry and exit criteria and roles and responsibilities for participants. An inspection can be performed by peers with different roles, such as moderator, author, reviewer and scribe. The following statement about inspection is not true:

B) The main purpose of an inspection is to find solutions to the problems. This statement is not true, as the main purpose of an inspection is to find defects or issues in a work product, not to find solutions to the problems. Finding solutions to the problems is a debugging or problem-solving activity that is usually performed by the author or developer after receiving the inspection report. The following statements about inspection are true:

A) An inspection may be led by a trained moderator who shall not be the author. This statement is true, as an inspection requires a moderator role who leads the inspection process and ensures that it follows the rules and standards. The moderator should be trained in inspection techniques and should not be the author of the work product under inspection, in order to avoid bias or conflict of interest.

C) An inspection can be performed by peers. This statement is true, as an inspection involves peer review, which means that the work product under inspection is evaluated by people who have similar roles or expertise as the author, but who are not directly involved in creating or modifying the work product.

D) An inspection shall follow a formal process based on rules and checklists with entry and exit criteria. This statement is true, as an inspection follows a formal process that consists of six main steps: planning, kick-off meeting, individual preparation, review meeting, rework and follow-up. Each step has defined rules and checklists to guide the participants and ensure consistency and quality. Each step also has entry and exit criteria to ensure that the prerequisites and objectives are met before moving to the next step. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, Chapter 3, page 28-29.

As a functional tester, you should open a defect report providing detailed information on which devices and by running which tests you observed the issue. A defect report is a document that records the occurrence, nature, and status of a defect detected during testing, and provides information for further investigation and resolution. A defect report should include relevant information such as the defect summary, the defect description, the defect severity, the defect priority, the defect status, the defect origin, the defect category, the defect reproduction steps, the defect screenshots, the defect attachments, etc. Opening a defect report is a good practice for any tester who finds a defect in the software system, regardless of the type or level of testing performed. The other options are not recommended, because:

The issue is related to performance efficiency, not functionality, but that does not mean that as a functional tester, you should not open any defect report as all the functional tests passed. Performance efficiency is a quality characteristic that measures how well the software system performs its functions under stated conditions, such as the response time, the resource utilization, the throughput, etc. Performance efficiency is an important aspect of the user experience, especially for web applications that run on different devices and networks. Even if the functional tests passed, meaning that the software system met the functional requirements, the performance issue observed on some devices could still affect the user satisfaction, the usability, the reliability, and the security of the software system. Therefore, as a functional tester, you have the responsibility to report the performance issue as a defect, and provide as much information as possible to help the developers or the performance testers to investigate and resolve it.

A static analysis tool is a tool that analyzes a given program’s source code or executable code without executing it. A static analysis tool can perform various types of analysis on a program’s code, such as syntax checking, data flow analysis, control flow analysis, complexity measurement, coding standards compliance checking, etc. Control flow analysis is a type of analysis that examines how a program’s statements are executed in different paths or branches. One of the most likely outcomes of control flow analysis is identification of unreachable code, which is code that can never be executed due to logical errors or design flaws. Unreachable code can reduce readability and maintainability of the code, as well as increase complexity and size. The other options are not outcomes of control flow analysis, but rather outcomes of other types of analysis. Report on adherence to coding standards is an outcome of coding standards compliance checking. Number of comment lines and number of source code lines are outcomes of complexity measurement. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 8.

The minimum number of test cases needed to cover the full decision table associated with this scenario is 6. This is because the decision table has 4 conditions (type of customer and amount of sale) and 4 actions (bonus percentage). The conditions have 2 possible values each (Basic or Premium, and G1, G2 or G3), so the total number of combinations is 2 x 2 x 2 x 2 = 16. However, not all combinations are valid, as some of them are contradictory or impossible. For example, a sale cannot be both less than 300 euros and greater than 2000 euros at the same time. Therefore, we need to eliminate the invalid combinations and keep only the valid ones. The valid combinations are:

Type of customer

Amount of sale

Bonus percentage

Basic

G1

3%

Basic

G2

5%

Basic

G3

7%

Premium

G1

5%

Premium

G2

7%

Premium

G3

10%

These 6 combinations cover all the possible values of the conditions and actions, and they are the minimum number of test cases needed to cover the full decision table.

Configuration management of testware is a critical aspect of maintaining the integrity and traceability of test assets throughout the testing lifecycle. The main benefit of configuration management is to ensure that all testware items, such as test cases, test scripts, test data, and test results, are systematically identified, version controlled, and tracked for changes in relation to each other.

Option C accurately describes this benefit. By applying configuration management principles to testware, teams can manage changes to test assets efficiently, ensuring that the testware remains consistent, up-to-date, and aligned with the version of the software under test. This control mechanism facilitates the reproducibility of tests, enhances the reliability of testing activities, and supports traceability from requirements through to defects.

Options A, B, and D describe other aspects of test management and testing processes but do not capture the core benefit of configuration management of testware, which is centered on the systematic control and tracking of testware items.

Test implementation involves finalizing the test procedures, including the order of execution of test cases based on their dependencies, preconditions, and postconditions. This phase ensures that all necessary test scripts, test data, and test environments are ready for execution. According to the ISTQB CTFL Syllabus v4.0, test implementation is the phase where detailed test procedures are derived and documented, making it a critical step before actual test execution​​.

Confirmation testing is performed after a defect is fixed, and if such testing is successful then the regression tests that are relevant for such fix can be executed. Confirmation testing, also known as re-testing, is the process of verifying that a defect has been resolved by running the test case that originally detected the defect. Confirmation testing is usually done before regression testing, which is the process of verifying that no new defects have been introduced in the software as a result of changes or fixes. Therefore, option D is the correct answer.

Selecting the right test technique is crucial because different techniques are suited to different types of testing and can significantly increase the effectiveness of the testing process by creating tests that are more likely to find defects. While reducing the number of tests (A) and defining the number of regression cycles (D) are considerations in the testing process, they are not the primary reasons for selecting a test technique. The assertion that the only way to test a software application is by using well-proven test techniques (B) is too restrictive and does not acknowledge the adaptability required in testing to suit different contexts and objectives. Therefore, option C is the most comprehensive reason, as it focuses on the effectiveness and efficiency of testing, leading to the creation of high-quality tests that have a higher chance of finding bugs.

The key principles of software testing include: i. Testing shows the presence of defects, not their absence. iv. Defects cluster together. v. Testing is context dependent. vi. Beware of the pesticide paradox. vii. Absence of errors is a fallacy. These principles highlight the importance of recognizing the limitations and context of testing, as well as the potential for repeated tests to become less effective​​.

The test levels and their objectives can be matched as follows:

Verifying whether the functional and non-functional behaviors of the system are as designed and specified (A3: System testing).

Verifying whether the functional and non-functional behaviors of the interfaces are as designed (B2: Integration testing).

Verifying whether the functional and non-functional behaviors of the components are as designed and specified (C1: Component testing).

Establishing confidence in the quality of the system as a whole (D4: Acceptance testing)​​.

Regression testing is the re-running of functional and non-functional tests to ensure that previously developed and tested software still performs as expected after a change1 It does not involve retesting of a fixed defect, testing of new functionality, or applying only to functional testing. Tests that are used for regression testing should be repeatable, because they are used to verify the stability of the software after each change2 References = ISTQB Certified Tester Foundation Level (CTFL) v4.0 Syllabus, Chapter 4, Section 4.2.2, Page 291; ISTQB Glossary of Testing Terms v4.0, Page 292

The test leader is the person who is responsible for planning, monitoring, and controlling the test activities and resources in a test project. The test leader should have the best knowledge of the test objectives, scope, risks, resources, schedule, and quality criteria. The test leader should also be aware of the test automation criteria, such as the execution frequency, the test support, the team education, the roles and responsibilities, and the devs and testers collaboration1. Based on these factors, the test leader can decide which tests are suitable for automation and which are not, and prioritize them accordingly. The test leader can also coordinate with the test automation engineers, the developers, and the stakeholders to ensure the alignment of the test automation strategy with the test project goals and expectations. References = ISTQB Certified Tester Foundation Level (CTFL) v4.0 Syllabus, Chapter 2, Section 2.3.1, Page 152; ISTQB Glossary of Testing Terms v4.0, Page 403; ISTQB Certified Tester Foundation Level (CTFL) v4.0 Syllabus, Chapter 6, Section 6.1.1, Page 514; Top 8 Test Automation Criteria You Need To Fulfill - QAMIND1

Technical reviews are structured meetings that aim to examine various aspects of a product or project to identify any defects or improvements. Options A (Pre-meeting preparation by reviewers), B (Using checklists during the meeting), and D (Preparation of a review report) are typical activities in a technical review process. Inviting end-users to the meeting (C), however, is generally not part of a typical technical review, as these reviews are usually more focused on the technical aspects and are conducted by peers or experts within the development or testing teams rather than end-users​​.

Comprehensive and Detailed In-Depth Explanation:

Independent testers provide a fresh perspective and are more likely to identify failures that developers might overlook due to their familiarity with the software (C). Independent testing helps avoid cognitive biases, improves defect detection, and enhances the overall quality assurance process. While A and D touch on related concepts, they do not directly define the benefit as well as C does. Option B highlights a potential challenge rather than a benefit.

Comprehensive and Detailed In-Depth Explanation:

Different test levels (unit, integration, system, acceptance) have specific objectives while sometimes overlapping to ensure comprehensive testing (D). Option A contradicts shift-left principles, B encourages late testing (which is ineffective), and C incorrectly assumes that all development activities require direct test actions.

The unscripted tests produced by the tester’s experience during the two-hour test session belong to the testing quadrant Q3. The testing quadrants are a classification of testing types based on two dimensions: the test objectives (whether the testing is focused on supporting the team or critiquing the product) and the test basis (whether the testing is based on the technology or the business). The testing quadrants are labeled as Q1, Q2, Q3, and Q4, and each quadrant represents a different testing perspective, such as unit testing, acceptance testing, usability testing, or performance testing. The testing quadrant Q3 corresponds to the testing types that have the objective of critiquing the product from the business perspective, such as exploratory testing, usability testing, user acceptance testing, alpha testing, beta testing, etc. The unscripted tests performed by the tester in the given scenario are examples of exploratory testing and usability testing, as they are based on the tester’s experience, intuition, and learning of the web application, and they focus on some specific usability issues, such as the user interface, the user satisfaction, the user feedback, etc. The other options are incorrect, because:

The testing quadrant Q1 corresponds to the testing types that have the objective of supporting the team from the technology perspective, such as unit testing, component testing, integration testing, system testing, etc. These testing types are usually performed by developers or testers who have access to the source code, the design, the architecture, or the configuration of the software system, and they aim to verify the functionality, the quality, and the reliability of the software system at different levels of integration.

The testing quadrant Q2 corresponds to the testing types that have the objective of supporting the team from the business perspective, such as functional testing, acceptance testing, story testing, scenario testing, etc. These testing types are usually performed by testers or customers who have access to the requirements, the specifications, the user stories, or the business processes of the software system, and they aim to validate that the software system meets the expectations and the needs of the users and the stakeholders.

The testing quadrant Q4 corresponds to the testing types that have the objective of critiquing the product from the technology perspective, such as performance testing, security testing, reliability testing, compatibility testing, etc. These testing types are usually performed by testers or specialists who have access to the tools, the metrics, the standards, or the benchmarks of the software system, and they aim to evaluate the non-functional aspects of the software system, such as the efficiency, the security, the reliability, or the compatibility of the software system under different conditions or environments. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.3.1, Testing in Software Development Lifecycles

ISTQB® Glossary of Testing Terms v4.0, Testing Quadrant, Exploratory Testing, Usability Testing, Unit Testing, Component Testing, Integration Testing, System Testing, Functional Testing, Acceptance Testing, Story Testing, Scenario Testing, Performance Testing, Security Testing, Reliability Testing, Compatibility Testing

The whole team approach, often advocated in Agile methodologies, emphasizes collaboration and collective responsibility among all team members. This approach enhances the relationships within the team and improves overall collaboration, which in turn benefits the project's success. According to the ISTQB CTFL Syllabus v4.0, the whole team approach fosters better communication and cooperation, leading to more effective problem-solving and higher-quality outcomes​​.

Static testing involves reviewing and inspecting the code, requirements, or design documents without executing the code. It can prevent defects, is effective early in the software development life cycle, and can help eliminate defects in user stories.

Option 1: "It can prevent defects by manual examination of the functional specification" - This is a value of static testing.

Option 2: "It is effective since it can be performed very early in the software development life cycle" - This is a value of static testing.

Option 3: "It can detect the failures in the running application" - This is a v​ (ISTQB not-for-profit association)​namic testing, not static testing.

Option 4: "It can help eliminate defects in user stories" - This is a value of static testing.

Option 5: "It can verify externally visible behaviors" - This is a value of dynamic testing, not static testing.

Therefore, the correct set of statements representing values only for static testing is 1, 2, 4, which corresponds to answer C【6†source】.