LEED-Green-Associate Sample Questions Answers

Potable water is water that is suitable for drinking. Potable water meets or exceeds the Environmental Protection Agency’s (EPA) drinking water quality standards and is free of contaminants that are harmful to human health. The other options are not suitable for drinking. Graywater is wastewater from sinks, showers, and laundry that can be reused for non-potable purposes such as toilet flushing and irrigation. Greenwater is rainwater that is collected and stored for non-potable uses. Stormwater is runoff from precipitation that can carry pollutants and sediments into waterways. References: LEED Green Associate Candidate Handbook, page 26; USGBC, [Water Efficiency], page 2.

An exemplary performance point is earned if the project achieves a performance level that is significantly higher than the credit requirements, as specified in the LEED Reference Guide1. The incremental performance threshold varies depending on the credit and is typically double the credit requirements or the next percentage threshold2.

 1 NC-v4.1 INc1: Innovation | LEEDuser2 What Is Exemplary Performance In LEED? | LEED Blog - Projectific, Inc.

Reused materials are materials that have been used before and are incorporated into a new building without significant alteration1. They are different from recycled materials, which are materials that have been reprocessed into new products or materials2. Reused materials reduce the demand for new resources and the amount of waste sent to landfills1. LEED v4 encourages the use of reused materials by awarding points for Building Product Disclosure and Optimization - Sourcing of Raw Materials3.

Construction Waste Management | WBDG - Whole Building Design Guide1

Why plastic waste is an ideal building material - BBC Future2

LEED v4 | HPAC Engineering3

Installing concrete sidewalks and parking areas will increase the quantity of the rainwater that is discharged from a site. Rainwater is the water that falls as precipitation on a site. Rainwater discharge is the amount of rainwater that leaves a site as surface runoff or subsurface flow. Rainwater discharge can affect the quantity and quality of water resources downstream by causing erosion, flooding, sedimentation, pollution, and habitat loss. Concrete sidewalks and parking areas are examples ofimpervious surfaces that prevent rainwater from infiltrating intothe soil and increase rainwater discharge by creating more runoff1 . References: LEED v4 Green Associate Candidate Handbook1, EPA’s Stormwater Management

LEED Thermal Comfort credit requires:

“Comfort Control – defined as the ability to adjust air / radiant temperature, air velocity or humidity… Ensure 50% of individual occupant space have thermal comfort controls.”

Ventilation control combined with adjustable temperature directly supports occupant comfort as per ASHRAE 55-2010.

According to systems thinking, climate change is an example of a positive feedback loop, which means that an initial change in one part of the system causes a chain ofevents that amplify the effects of the change. For example, as the Earth warms due to increased greenhouse gas emissions, ice sheets and glaciers melt, reducing the albedo (reflectivity) of the Earth’s surface and allowing more solar radiation to be absorbed, which further increases the temperature and accelerates the melting process. This is one of several positive feedback loops that can accelerate climate change and make it harder to reverse.

15 Climate Feedback Loops and Examples - Earth How

Systems Thinking Through Climate Change — 5 Positive Feedback Loops

What are climate change feedback loops? - The Guardian

The Full Time Equivalent (FTE) occupancy of a project is a measure of how many people occupy a building or space on a regular basis. The FTE occupancy is calculated by dividing the total number of hours worked by all occupants in a week by the standard weekly hours for one FTE occupant. Thestandard weekly hours for one FTE occupant is typically 40 hours per week1 . For this project, the FTE occupancy is calculated as follows:

16 employees x 4 hours/day x 5 days/week = 320 hours/week 20 employees x 6 hours/day x 5 days/week = 600 hours/week 10 employees x 8 hours/day x 5 days/week = 400 hours/week Total hours/week = 1320 hours/week FTE occupancy = 1320 hours/week / 40hours/week = 33 Therefore, the FTE occupancy of the project is 33. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide

The Integrative Process Credit in LEED v4 requires the project team to implement an integrative process that enables themto discover unique opportunities for enhancing project performance and environmental benefits1. The project team should identify and use opportunities to achieve synergies across disciplines and building systems2.

References := Integrative process | U.S. Green Building Council, LEED Integrative Process Credit Explained - Projectific, Inc.

According to the LEED Study Guide:

“LEED for Operations and Maintenance (LEED O+M) applies to existing buildings that are fully operational and occupied.”

This system evaluates how a building performs after it is constructed and in use, making it the correct fit for a built project.

A brownfield site is appropriate for development of LEED projects because it is a site that has been previously used for industrial or commercial purposes and may be contaminated by pollutants or hazardous substances. Developing a brownfield site can help reduce environmental impacts, such as soil erosion, habitat loss, and water consumption, by reusingexisting infrastructure and restoring degraded land. LEED projects can earn credits for developing on brownfield sites under the Sustainable Sites category. References: LEED v4 BD+C Reference Guide, Sustainable Sites, page 35; Best Management Practice #14: Alternative Water Sources1

Increasing density means building more units or floor area on a given site, which reduces the amount of land and resources needed per unit or occupant1. This also creates a smaller footprint and maximizes the floor area ratio (FAR), which is the ratio of the total building floor area to the site area2. Increasing density can help achieve creditsin the Location and Transportation category, such as Surrounding Density and Diverse Uses3.

LEED v4: Neighborhood Development Guide | U.S. Green Building Council1

Floor Area Ratio - Planning Department2

LEED v4: Building Design + Construction Guide - U.S. Green Building Council3

Submetering systems are devices that measure the water consumption of specific building components, such as cooling towers, irrigation systems, process water systems, or tenant spaces. They allow the facility operator to monitor and optimize the water use of different systems and identify any leaks or inefficiencies12. Submetering systems are also required for some LEED credits, such as Water Metering and Cooling Tower Water Use3.

How LEED Guides Users to Water Efficiency - Facilitiesnet1

Optimize Process Water Use | U.S. Green Building Council2

LEED Certification Tips: Water Efficiency | Buildings4

An office without transit access can substantially reduce its transportation impact if workers are able to walk from the office to basic services. Transportation impact is the effect of transportation activities on the environment, society, and economy. Transportation impact can include greenhouse gas emissions, air pollution, noise pollution, energy consumption, land use, traffic congestion, infrastructure costs, and public health. Walking is a form of alternative transportation that can reduce transportation impact by using less energy, emitting less pollutants, occupying less space, and improving physical activity and well-being. If workers are able to walk from the office to basic services, such as retail, restaurants, banks, or post offices, they can reduce their vehicle miles traveled, fuel consumption, and parking demand1 . References: LEED v4 Green Associate Candidate Handbook1, EPA’s Transportation and Climate Change

LEED considers products to be environmentally preferable when they are locally extracted, manufactured, and purchased. This is because local sourcing reduces the environmental impact associated with transportation, supports local economies, and can often ensure that the materials are suitable for the local climate and conditions. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Gallons per minute or liters per minute refers to the amount of water used by flow fixtures in LEED. Flow fixtures are fixtures that deliver a constant stream of water, such as faucets, showerheads, or hose bibs. The flow rate of these fixtures is measured in gallons per minute (gpm) or liters per minute (L/min), which indicates how much water flows through them in a given time period. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving water efficiency is to “use low-flow faucets and showerheads (maximum 2.5 gpm at 80 psi)” [1, p. 14]. References: LEED Green Associate Candidate Handbook, [Water Efficiency | U.S. Department of Energy]

Open grid pavement, also known as permeable pavement, allows water to drain through it, reducing runoff and recharging groundwater supplies. It also tends to be lighter in color than traditional asphalt, which means it absorbs less heat from sunlight. This helps to reduce the urban heat island effect, which is a phenomenon where urban areas are significantly warmer than their rural surroundings due to human activities. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Integrative design is the term that encourages team members to collaborate throughout the process of design and construction to create synergistic solutions. Integrative design is an approach that considers the interrelationships among various building systems, environmental factors, and occupant needs, and seeks to optimize the performance, cost, and environmental benefits of the project. The LEED Green Associate Candidate Handbook states that one of the intents of the Integrative Process category is to “support high-performance, cost-effective project outcomes through an early analysis of the interrelationships among systems” [1, p. 12]. References: LEED Green Associate Candidate Handbook, [Integrative Design Process | Whole Building Design Guide]

Shielded light fixtures are designed to direct light downwards and prevent it from spilling over into areas where it’s not wanted, such as beyond the project boundary. This helps to prevent light trespass, which can be a form of pollution that disrupts ecosystems and human sleep patterns. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

LEED defines Life Cycle Assessment (LCA) as:

“Life Cycle Assessment (LCA) analyzes the environmental impacts of a service, material or product through its entire life cycle.”

This makes LCA distinct from Life Cycle Costing (LCC), which evaluates economic impact.

process water is water that is used for specific processes in industries, businesses, or buildings. Process water can include water used for cooling, heating, washing, rinsing, sterilizing, humidifying, or other purposes. Process water can also include water used for building systems, such as cooling towers, boilers, chillers, or irrigation123.

Process water is different from domestic water, which is water used for human consumption or hygiene, such as drinking, cooking, bathing, or flushing toilets. Process water is also different from wastewater, which is water that has been contaminated by human or industrial activities and requires treatment before being discharged or reused24.

Process water is an important aspect of water efficiency in LEED certification. LEED v4.1 offers credits for optimizing process water use by reducing the demand or increasing the use of alternative sources of water, such as rainwater, graywater, or reclaimed water

A 100% vegetated roof coverage best addresses both heat island effect and rainwater runoff from the roof only. A vegetated roof, also known as a green roof, is a layer of living plants thatcovers the roof surface. A vegetated roof reduces the heat island effect by providing shade, evapotranspiration, and insulation, lowering the roof temperature and the surrounding air temperature. A vegetated roof also reduces rainwater runoff by retaining and absorbing precipitation, decreasing the volume and peak flow of stormwater leaving the roof. The other options are not as effective as a 100% vegetated roof coverage in addressing both heat island effect and rainwater runoff from the roof only. A 100% high-albedo roof reflects more solar radiation than a conventional roof, reducing the heat island effect, but it does not reduce rainwater runoff. A 20% high-albedo and 80% conventional roof has a lower reflectance than a 100% high-albedo roof, resulting in a higher heat island effect, and it does not reduce rainwater runoff either. A 50% standing seam copper and 50% vegetated roof has a lower vegetated area than a 100% vegetated roof, resulting in less shade, evapotranspiration, insulation, retention, and absorption, leading to a higher heat island effect and more rainwater runoff. References: LEED Green Associate Candidate Handbook, page 27; USGBC, [Sustainable Sites], page 3.

ASHRAE 55 defines thermal comfort by outlining acceptable indoor conditions for temperature, humidity, and air movement. This standard is essential for meeting LEED Indoor Environmental Quality requirements​​.

Stormwater runoff can indeed be treated and used in a facility’s cooling towers. This is an example of using non-potable water (water that is not of drinking quality) for purposes that do not require potable water. Other uses for treated stormwater might include toilet flushing or irrigation. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Installing a solar hot water heater is a strategy that meets energy demand with renewable energy. Solar hot water heaters use the sun’s energy to heat water, reducing the need for non-renewable energy sources. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Closed systems are systems that promote the conservation of materials and resources by linking elements in order to form relationships with their function. Closed systems aim to minimize waste, energy loss, and environmental impact by reusing, recycling, or regenerating materials within the system boundaries. Closed systems can be inspired by natural ecosystems, where waste from one process becomes food for another process. An example of a closed system is a building that collects rainwater for irrigation, uses solar panels for electricity, composts organic waste forfertilizer, and recycles greywater for flushing toilets1 . References: LEED v4 Green Associate Candidate Handbook1, Biomimicry Institute’s What is Biomimicry?

Occupant surveys are tools that can be used to identify indoor environmental issues and prepare a corrective action plan to make necessary changes. Occupant surveys are questionnaires that collect feedback from the building users about their satisfaction, comfort, health, and productivity in relation to the indoor environmental quality (IEQ) factors, such as thermal comfort, indoor air quality, lighting quality, acoustic quality, and occupant control. Occupant surveys can help to identify the sources and causes of IEQ problems, as well as the potential solutions and improvements. Occupant surveys are also required for some LEED credits, such as IEQc7.2 Thermal Comfort, Verification1, which requires a corrective action plan if more than 20% of the occupants are dissatisfied with the thermal conditions in the space2. The other options are not directly related to identifying indoor environmental issues and preparing a corrective action plan, as they involve different types of tools or metrics that are not relevant for measuring occupant satisfaction and comfort.

Light-colored paving and cool roofs refer to materials with higher emissivity and higher albedo. Emissivity is the ability of a material to emit heat that it absorbs, while albedo is a measure of how much light that hits a surface is reflected without being absorbed. Materials with high emissivity can help reduce heat islands by releasing more of the heat they absorb, while those with high albedo can reflect more sunlight and thus stay cooler. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

The best way to prevent a building’s indoor pollutant(s) is to eliminate or control pollutants at the source. Indoor pollutants are substances or particles that can adversely affect the indoor air quality (IAQ) of a building and the health, comfort, and productivity of the occupants. Indoor pollutants can originate from various sources, such as building materials, furnishings, cleaning products, combustion appliances, outdoor air, or occupant activities. Eliminating or controlling pollutants at the source can prevent them from entering or spreading in the indoor environment, which can reduce the exposure and risk for the occupants. Some examples of source control strategies are: using low-emitting materials, installing local exhaust ventilation, sealingcombustion appliances, implementing green cleaning practices, and prohibiting smoking13. References: LEED v4 Green Associate Candidate Handbook1, EPA’s Indoor Air Quality3

Building commissioning is a quality assurance process that begins during the design phase and continues through construction, occupancy, and operation of the building. It ensures that the building’s systems are designed efficiently, installed correctly, and operate as intended. The commissioning process involves a series of inspections, tests, and adjustments of building systems, followed by a review of the system design and operation with the building’s operations team. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Increasing the amount of ventilation in an occupied space affects the Indoor Environmental Quality credit category. Ventilation is the process of supplying fresh outdoor air and removing stale indoor air from a building. Ventilation can improve the indoor environmental quality by diluting or removing indoor pollutants, such as carbon dioxide, volatile organic compounds, or particulate matter, and enhancing the thermal comfort and well-being of the occupants. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving indoor environmental quality is to “increase ventilation rates” [1, p. 16]. References: LEED Green Associate Candidate Handbook, [Ventilation | U.S. Department of Energy]

The use of native plant species, captured rainwater, and evapotranspiration controllers are all strategies that can contribute to reducing outdoor water use. Native plants are adapted to local conditions and typically require less water than non-native species. Captured rainwater can be used for irrigation, reducing the need for potable water. Evapotranspiration controllers adjust irrigation schedules based on weather conditions and plant needs, preventing overwatering. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

The water use reduction for a project is determined by finding the difference between the baseline conditions and the calculated installed case. The baseline conditions are the water use of the project if it were designed to meet the minimum requirements of the Energy Policy Act of 1992 or a local equivalent, whichever is more stringent. The calculated installed case is the water use of the project based on the actual fixtures and fittings installed or specified. The water use reduction is calculated as a percentage of savings from the baseline conditions. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving water efficiency is to “calculate water use reduction by comparing a building project’s water use with the water use baseline calculated for the building after meeting the Energy Policy Act of 1992 fixture performance requirements” [1, p. 14]. References: LEED Green Associate Candidate Handbook, [Water Use Reduction | U.S. Green Building Council]

The Energy and Atmosphere (EA) category addresses the energy performance, efficiency, and renewable sources of buildings. One of the credits in this category is EA Credit: Enhanced Refrigerant Management, which aims to reduce the emissions of ozone-depleting substances and greenhouse gases from refrigeration and air-conditioning equipment. Refrigerants are substances that are used to transfer heat in cooling systems. Some refrigerants have high global warming potential (GWP) and ozone depletion potential (ODP), which means they can contribute to climate change and damage the ozone layer if they leak or are improperly disposed of. Enhanced refrigerant management involves selecting refrigerants with low GWP and ODP, minimizing refrigerant charge size, and preventing or detecting leaks12. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide2

This is the correct order of the LEED certification process for most projects1. The first step is to register the project on LEED Online and pay the registration fee2. The second step is to prepare the application by collecting and uploading the required information and documents according to the chosen rating system and credits2. The third step is to submit the application and pay the certification fee2. The fourth step is to undergo the application review by a LEED accredited third party, which may request clarifications or corrections2. The final step is to receive the certification decision and the LEED plaque and certificate2.

Life-cycle cost analysts of a new construction includes consideration of

cost of purchasing window glazing

cost of adding accessible parking

cost of challenging a real estate tax assessment

cost of subsidizing the use of public transportation

Answer: A

Life-cycle cost analysis (LCCA) is a method for assessing the total cost of owning a facility or running a project. It considers all the costs associated with obtaining, owning, and disposing of an investment1. The cost of purchasing window glazing is one of the initial costs that affects the energy performance and thermal comfort of a building2. Therefore, it is included in the LCCA of a new construction.

https://www.usgbc.org/credentials/leed-green-associate

A vegetated roof, also known as a green roof, is a roof that is partially or completely covered with vegetation and a growing medium, such as soil or compost. A vegetated roof can help reduce the heat island effect and manage rainwater runoff by providing the following benefits12:

It reduces the surface temperature of the roof by reflecting solar radiation and cooling the air through evapotranspiration, which is the process of plants releasing water vapor from their leaves. This can lower the ambient temperature of the surrounding area and improve thermal comfort for occupants and pedestrians.

It reduces the amount and speed of stormwater runoff by retaining and filtering rainwater in the vegetation and growing medium. This can prevent flooding, erosion, and pollution of downstream water bodies, as well as reduce the demand for potable water for irrigation or other purposes.

It enhances the biodiversity and habitat of the urban environment by providing a space for plants, animals, insects, and microorganisms to thrive. This can improve the ecological health and resilience of the ecosystem and provide aesthetic and recreational benefits for humans.

Other strategies that can contribute to reducing the heat island effect and managing rainwater runoff are:

White cement roof pavers: These are tiles made of concrete that have a high solar reflectance index (SRI), which measures how well a surface reflects solar radiation. White cement roof pavers can help reduce the surface temperature of the roof by reflecting more solar radiation than darker or less reflective materials. However, they do not provide any benefits for stormwater management, as they are impervious surfaces that do not retain or filter rainwater34.

A rainwater collection system: This is a system that captures and stores rainwater from roofs or other surfaces for reuse. A rainwater collection system can help reduce stormwater runoff by diverting rainwater from landfills or incinerators to other destinations, such as irrigation, toilet flushing, or cooling. However, it does not provide any benefits for reducing the heat island effect, as it does not affect the surface temperature of the roof or the surrounding air5 .

Shading structures that include photovoltaic panels: These are structures that provide shade for roofs or other surfaces by blocking direct sunlight. Shading structures that include photovoltaic panels can help reduce the heat island effect by lowering the surface temperature of the roof or the shaded area. They can also help generate renewable energy from solar power, which can reduce greenhouse gas emissions and energy costs. However, they do not provide any benefits for stormwater management, as they do not retain or filter rainwater .

Life-cycle assessment (LCA) is the approach that refers to the identification and quantification of environmental effects throughout the life of the materials and products used in a project as well as the project itself. LCA evaluates the environmental impacts of a product, process, or service from cradle to grave, or from raw material extraction to disposal or reuse. LCA considers various impact categories, such as global warming potential, ozone depletion potential, acidification potential, eutrophication potential, smog formation potential, and human health impacts. LCA can help to compare the environmental performance of different design options, select more sustainable materials and products, and reduce the environmental footprint of a project

The Integrative Process is most effective during the early design stage of a project. This is when key decisions about the project are being made that can have a significant impact on its sustainability performance. By considering sustainability objectives from the outset, teams can identify opportunities for synergies and cost savings that may not be apparent later in the project. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

ASHRAE 62.1 is a standard that ensures adequate ventilation is supplied to building occupants. ASHRAE stands for the American Society of Heating, Refrigerating and Air-ConditioningEngineers, a professional organization that develops standards and guidelines for the design, operation, and maintenance of buildings. ASHRAE 62.1 is a standard that specifies the minimum ventilation rates and other measures for new and existing buildings that are intended to provide acceptable indoor air quality (IAQ) for the occupants. Ventilation is the process of supplying outdoor air to or removing indoor air from a building. Adequate ventilation is important for maintaining good IAQ, which can affectthe health, comfort, and productivity of the occupants13. References: LEED v4 Green Associate Candidate Handbook1, ASHRAE’s Standard 62.13

The USGBC administers the LEED credentialing programs, which include the LEED Green Associate and the LEED AP with specialty credentials. The USGBC does not administer the LEED exams, the LEED rating systems development, or the LEED project certification.

The LEED Green Associate Candidate Handbook states that “The U.S. Green Building Council (USGBC) administers the LEED credentialing programs related to green building practice” 1, page 3.

The same handbook also states that “The Green Business Certification Inc. (GBCI) administers the LEED professional credential exams” 1, page 3.

The LEED AP with Specialty Candidate Handbook states that “The U.S. Green Building Council (USGBC) is responsible for the development of the LEED rating systems” 2, page 3.

The same handbook also states that “The Green Business Certification Inc. (GBCI) administers project certification for all commercial and institutional projects pursuing LEED certification under any of the current rating systems” 2, page 3.

Conserving the Earth’s potable water supply is a green building objective that can be achieved by utilizing high efficiency water fixtures. High efficiency water fixtures reduce the amount of water used for indoor plumbing, which reduces the demand on municipal water supply and wastewater systems. This also saves energy and money for the building owners and occupants. The LEED Green Associate Candidate Handbook states that one of the intents of the Water Efficiency category is to “reduce potable water use within buildings and for landscape irrigation” [1, p. 13]. References: LEED Green Associate Candidate Handbook, [Water Efficiency | U.S. Green Building Council]

Conducting an occupant comfort survey with all building occupants is an effective way to identify occupant comfort issues in a space based on LEED best practices. An occupantcomfort survey is a tool that collects feedback from building occupants about their satisfaction with various aspects of their indoor environment, such as thermal comfort, lighting quality, acoustic quality, air quality, ergonomics, and aesthetics. An occupant comfort survey can help identify areas of improvement and potential solutions for enhancing occupant comfort and well-being. The other options are not effective ways to identify occupant comfort issues in a space based on LEED best practices. Installing energy meters in the building is a strategy that measures energy performance, but does not directly address occupant comfort. Discussing potential issues with building owner is a subjective and limited way of gathering information, as the building owner may not represent the views and experiences of all building occupants. Waiting for occupants to alert facilities management team of issues is a passive and reactive way of addressing occupant comfort, as some occupants may not voice their concerns or may have already suffered from discomfort. References: LEED Green Associate Candidate Handbook, page 25; USGBC, [Guide to LEED Certification: Commercial], page 13.

SRI is a measure of a material's ability to reflect solar heat (reflectivity) and release absorbed heat (emissivity). This index helps evaluate materials for reducing the heat island effect under the Sustainable Sites category​​.

The coordination of building and site systems should be addressed at the predesign stage to maximize the impact of integrative process. The integrative process is a method of design and construction that involves the collaboration and coordination of all project stakeholders from the beginning to achieve the project’s sustainability goals1. The predesign stage is the earliest phase of the project, where the project vision, scope, budget, schedule, and performance targets are defined2. By addressing the coordination of building and site systems at this stage, the project team can identify and analyze the interrelationships and synergies among various systems, such as energy, water, materials, indoor environmental quality, and site ecology3. This can help the team to optimize the design solutions, reduce costs and risks, enhance performance and quality, and avoid rework and conflicts later in the projec

LEED Building Design and Construction Homes and Multifamily Low-rise is a rating system that applies to single-family homes and multifamily buildings between one and three stories. This rating system covers the design and construction phases of residential projects that areintended for human occupancy12. Projects that have more than three stories are not eligible for this rating system, but may qualify for other LEED rating systems, such as LEED Building Design and Construction Multifamily Mid-rise, which applies to multifamily buildings between four and eight stories

Including subsidies for carpools is a strategy that can increase the number of points the project receives for Location and Transportation credits. This is because it reduces the demand for single-occupancy vehicle trips and parking spaces, which in turn reduces greenhouse gas emissions, traffic congestion, and land consumption12. The project can earn up to 15 points for the Transportation Demand Management credit by providing various incentives and programs to encourage alternative modes of transportation, such as carpooling, public transit, biking, or walking12.

LEED emphasizes:

“The integrative process... encourages the project team to find opportunities to achieve synergies throughout all building systems.”

The integrative approach involves energy and water analysis in early phases to drive sustainability.

The amount of landfill-destined waste generated during project construction can be reduced by requiring the general contractor to follow requirements for using dimensional construction materials, prefabrication or material efficient framing. These methods reduce the amount of material waste by minimizing cutting, fitting, and trimming on site, and by using standardized or modular components that can be easily reused or recycled. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving materials and resources efficiency is to “reduce construction waste through efficient framing techniques” [1, p. 15]. References: LEED Green Associate Candidate Handbook, [Reducing Construction Waste | U.S. Environmental Protection Agency]

Graywater refers to relatively clean wastewater from domestic activities such as washing dishes, laundry, and bathing. Water from lavatory faucets falls into this category. Graywater can be treated and reused for non-potable purposes such as toilet flushing or irrigation, which can help conserve water. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

The environmental harm associated with transportation is reduced when purchasing and installing locally sourced, environmentally preferable products. Locally sourced products are products that are extracted, harvested, recovered, or manufactured within a certain distance from the project site. Environmentally preferable products are products that have reduced environmental impacts compared to similar products in terms of energy use, water use, materials use, waste generation, emissions, toxicity, and durability. Purchasing and installing locally sourced, environmentally preferable products reduces the amount of fuel consumption, greenhouse gas emissions, air pollution, and road congestion associated with transporting products over long distances. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving materials and resources efficiency is to “use local or regional materials (extracted, processed and manufactured within 100 miles)” [1, p. 15]. References: LEED Green Associate Candidate Handbook, [Environmentally Preferable Purchasing | U.S. Environmental Protection Agency]

Sizing the building appropriately means designing the building to meet the needs and expectations of the occupants, without creating excess space that would require more energy to heat, cool, and light. This strategy reduces the energy demand of the building and also saves on construction costs and materials.

LEED v4 for Building Design and Construction, p. 36

LEED Green Associate Candidate Handbook, p. 11

According to the LEED v4 Glossary of Terms1, a site that has been graded is commonly defined as previously developed, which means "land that has been altered by paving, construction, and/or land use that would typically have required regulatory permitting to have been initiated (alterations may exist now or in the past)"1. A greenfield is "a site not previously developed or graded that could support open space, habitat, or agriculture"1. A brownfield is "a property, the expansion, redevelopment, or reuse of which may be complicated by the presence or potential presence of a hazardous substance, pollutant, or contaminant"1. A previously undeveloped site is "a site that has never been built on or graded for development"2.

A charrette is a strategy that can help build consensus for a project’s sustainability goals. A charrette is an intensive, collaborative, and creative workshop that brings together the project team and other stakeholders to define the project goals, scope, and strategies. A charrette can help to establish a common vision, identify synergies, and prioritize actions for a green building project. A charrette can also foster communication, trust, and buy-in among the participants13. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide3

LEED promotes compact, transit-rich locations:

“Locating a project in an area that supports walking, biking, and mass transit... will result in lower GHG emissions from reduced car travel.”

Urban centers offer the best access to alternative transport and reduce reliance on fossil fuels.

Building-Level Water Metering is a prerequisite in LEED v4 Water Efficiency category. Building-Level Water Metering means that the project must install permanent water meters that measure the total potable water use for the building and associated grounds. The project must also commit to sharing the water usage data with USGBC for at least five years after occupancy or certification. The LEEDGreen Associate Candidate Handbook states that this is one of the two prerequisites in the Water Efficiency category [1, p. 14]. References: [LEED Green Associate Candidate Handbook], [Building-Level Water Metering | U.S. Green Building Council]

Energy use intensity (EUI) is a measure of energy use per unit of floor space. It is calculated by dividing the total energy consumed by the building in one year (measured in kilowatt-hours or kilo-British Thermal Units) by the total gross floor area of the building (measured in square feet or square meters). EUI is a useful metric for comparing the energy performance of different buildings or benchmarking against national averages. EUI can vary depending on building type, climate, occupancy, and other factors. Generally, a lower EUI indicates better energy efficiency and lower environmental impact. References: What is Energy Use Intensity (EUI)?2; Energy Use Intensity (EUI)3

An occupant survey is the most efficient way for building users to rate the heating and air-conditioning and other aspects of work spaces. An occupant survey is a tool that collects feedback from building occupants about their satisfaction with various aspects of their indoor environment, such as thermal comfort, lighting quality, acoustic quality, air quality, and spatial layout. An occupant survey can help identify areas for improvement, monitor performance, evaluate design strategies, and inform future decisions. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving indoor environmental quality is to “conduct occupant surveys on thermal comfort” [1, p. 16]. References: LEED Green Associate Candidate Handbook, [Occupant Surveys | Center for the Built Environment]

ASHRAE stands for the American Society of Heating, Refrigerating and Air-Conditioning Engineers, a professional organization that develops standards and guidelines for the design, operation, and maintenance of buildings. ASHRAE standards are applicable to two LEED categories: Energy and Atmosphere (EA) and Indoor Environmental Quality (IEQ). The EA category addresses the energy performance, efficiency, and renewable sources of buildings. The IEQ category addresses the indoor air quality, thermal comfort, lighting quality, and acoustic performance of buildings. Some of the ASHRAE standards that are relevant for these categories are: ASHRAE Standard 90.1 for energy efficiency;ASHRAE Standard 62.1 for ventilation; ASHRAE Standard 55 for thermal comfort; ASHRAE Standard 189.1 for high-performance green buildings1 . References: LEED v4 Green Associate Candidate Handbook1, ASHRAE’s Standards & Guidelines

The project team’s strategy of using low-flow toilet fixtures and integrating non-potable water strategies for the building interior falls under the Water Efficiency category. The Water Efficiency category addresses the conservation and management of water resources in buildings and landscapes. Using low-flow toilet fixtures reduces the amount of potable waterused for flushing toilets, saving water and energy. Integrating non-potable water strategies for the building interior involves using alternative sources of water, such as rainwater, graywater, or reclaimed water, for non-potable purposes such as toilet flushing or irrigation, reducing the demand for potable water and wastewater generation. The other options are not categories that this strategy falls under. Innovation is a category that recognizes exemplary performance, innovative strategies, or pilot credits that are not covered by existing LEED credits. Sustainable Sites is a category that addresses the selection, development, and maintenance of project sites in ways that minimize environmental impacts and enhance human health and well-being. Optimized Process Water Use is not a LEED category or credit. References: LEED Green Associate Candidate Handbook, page 31; USGBC [Water Efficiency], page 1-2.

The statement that is the U.S. Green Building Council (USGBC) vision is: Buildings and communities will regenerate and sustain the health and vitality of all life within a generation. USGBC is a non-profit organization that promotes sustainability in the building industry through its LEED rating system, education programs, advocacy initiatives, and research projects. USGBC’s vision reflects its commitment to transformingthe built environment into one that supports human health, environmental quality, social equity, and economic prosperity1 . References: LEED v4 Green Associate Candidate Handbook1, USGBC’s Vision

LEED Operations & Maintenance focuses on:

“Green Cleaning – the use of environmentally preferred cleaning practices and materials after occupancy…”

It’s a post-occupancy strategy to maintain indoor environmental quality.

Water closets, also known as toilets, are fixtures that use water to flush human waste into a sewer or septic system. The unit of measure for water closets is gallons (liters) per flush, which indicates the amount of water used for each flushing cycle. The water efficiency of water closets can vary depending on the design, technology, and regulation of the fixture. The LEED rating system encourages the use of water-efficient fixtures that reduce water consumption and wastewater generation12. References: LEED v4 Green Associate Candidate Handbook1, EPA’s WaterSense Toilets2

Daylighting is a strategy that uses natural light to illuminate the interior spaces of a building, reducing the need for artificial lighting and improving the visual comfort and well-being of the occupants. One of the strategies that can help improve daylighting in an office building is tolocate private offices toward the building core and organize cubicles at the perimeter, so that more people can benefit from the access to windows and views. This can also increase the daylight penetration depth and reduce glare and contrast12. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide2

According to the U.S. Energy Information Administration, space heating accounted for about 32% of energy use for all U.S. commercial buildings in 2018, followed by ventilation and lighting, each at about 10%1. Space heating is the largest single energy end use in U.S. office buildings as well2.

Use of energy in commercial buildings - U.S. Energy Information Administration (EIA)1

DataTrends: Energy Use in Office Buildings | ENERGY STAR2

Offering financial incentives is a strategy that can be used to address transportation in operation and maintenance under the Location and Transportation (LT) category. The LT category addresses the location and accessibility of a project site, as well as its impacts on transportation, land use, and community connectivity. One of the credits in this category is LTCredit: Alternative Transportation - Transportation Demand Management, which rewards projects that implement programs or policies that reduce single-occupancy vehicle trips and encourage alternative transportation modes, such as public transit, carpooling, biking, or walking. Offering financial incentives is one example of such a program or policy, which can provide benefits or rewards for the employees or tenants who use alternative transportation modes, such as subsidies, vouchers, discounts, prizes, recognition, or preferential parking1 . References: LEED v4 Green AssociateCandidate Handbook1, LEED v4 O+M Reference Guide

Scope 1 greenhouse gas emissions are direct emissions from sources that are owned or controlled by the organization. On-site landfills are an example of a source of Scope 1 emissions, as they release methane and carbon dioxide from the decomposition of organic waste12.

Business travel, purchased electricity, and employee commuting are examples of sources of Scope 2 or Scope 3 emissions, which are indirect emissions from sources that are not owned or controlled by the organization. Business travel and employee commuting are Scope 3 emissions, as they occur from the activities of the organization’s value chain, such as suppliers and customers12. Purchased electricity is a Scope 2 emission, as it occurs from the generation of electricity that the organization consumes

In addition to temperature and air movement, humidity is another factor to consider when implementing thermal comfort strategies. Humidity is the amount of water vapor in the air, which affects how warm or cool people feel. High humidity can make people feel hotter and more uncomfortable, while low humidity can cause dryness and irritation of the skin, eyes, nose, and throat. Thermal comfort strategies should aim to maintain an optimal level of humidity that balances human comfort and health with energy efficiency and moisture control. The other options are not factors to consider when implementing thermal comfort strategies. Methane off-gassing is the release of methane gas from organic matter decomposition or anaerobic digestion, which contributes to greenhouse gas emissions and climate change. Carbon dioxide concentrations are a measure of indoor air quality that indicates the level of ventilation and fresh air supply in a space. Combustion processes from vehicles are sources of outdoor air pollution that emit carbon monoxide, nitrogen oxides, particulate matter, and other harmful substances. References: LEED Green Associate Candidate Handbook, page 29; USGBC, [Indoor Environmental Quality], page 2.

Installing permanent water submeters that measure the total potable water use for a building and associated grounds allows facility staff to track water consumption and identify leaks. This can help reduce water waste, lower utility bills, and improve water efficiency1. It can also contribute to the Water Metering credit in the Water Efficiency category of LEED v42.

How LEED Guides Users to Water Efficiency - Facilitiesnet1

Submeter at least two water subsystems | LEEDuser2

To qualify for any level of LEED certification, a project must meet all the prerequisites and achieve a minimum number of points based on the ratingsystem and the certification level1. The prerequisites are mandatory requirements that must be met before a project can earn any points2. The points are awarded for achieving optional credits that demonstrate environmental performance and innovation2. The LEED rating system consists of five broad categories: Building Design and Construction (BD+C), Interior Designand Construction (ID+C), Building Operations and Maintenance (O+M), Neighborhood Development (ND), and Homes3. Each category has different adaptations for specific project types and scopes, such as Schools, Retail, Hospitality, Data Centers, Warehouses and Distribution Centers, Healthcare, etc3. Each adaptation has a different number of prerequisites and credits, and a different point scale for each certification level4. The certification levels are: Certified, Silver, Gold, and Platinum1. The minimumpoints required for each level vary depending on the rating system and the adaptation, but generally range from 40 to 80 points1.

In this question, the project has achieved 53 points and six of eight prerequisites. This means that the project has failed to meet two prerequisites, which are mandatory requirements. Therefore, the project does not qualify for any level of LEED certification, regardless of the rating system or the adaptation. The answer is A. None.

=

The 4 Levels of LEED Certification and How to Achieve Them

LEED credits, prerequisites and points: How are they different?

LEED rating system

LEED rating system selection

Acoustic Performance is a credit that aims to provide workspaces andclassrooms that promote occupants’ well-being, productivity, and communications through effective acoustic design1. This credit falls under the Indoor Environmental Quality category, which addresses the quality of the indoor environment as it relates to the health andcomfort of building occupants2. The Indoor Environmental Quality category has different credits for different LEED rating systems, such as LEED BD+C, LEED ID+C, LEED O+M, and LEED ND3. Acoustic Performance is one of the credits that is available for some of these rating systems, such as LEED BD+C: Schools, LEED ID+C: Commercial Interiors, and LEED O+M: Existing Buildings4.

=

Acoustic performance | U.S. Green Building Council

Indoor Environmental Quality |U.S. Green Building Council

LEED Rating Systems Overview

LEED rating system

Setting project goals is the action that the design team should conduct first in order to incorporate green building strategies in a six-story commercial building renovation project. Setting project goals is an important step in the integrative process that defines the vision and expectations for the project’s sustainability performance and guides the decision-making throughout the design and construction phases. Setting project goals involves engaging key stakeholders, such as owners, users, designers, contractors, and operators, and identifying measurable objectives, targets, and metrics for various aspects of green building, such as energy efficiency, water conservation, material selection, indoor environmental quality, site selection, and transportation access. The LEED Green Associate Candidate Handbook states that one of the steps in the integrative process is to “establish sustainability goals early in project development” [1, p. 12]. References: LEED Green Associate Candidate Handbook, [Integrative Process | U.S. Green Building Council]

Strategies for improving building occupants’ comfort and control may consist of installing operable windows, giving occupants lighting control and providing ergonomic furniture. These strategies can enhance the indoor environmental quality (IEQ) of a building, which is the physical and psychological conditions of the indoor spaces that affect the health, comfort, and productivity of the occupants. Installing operable windows can allow occupants to adjust the natural ventilation, temperature, and fresh air intake of their spaces. Giving occupants lighting control can allow them to adjust the artificial lighting levels, color, and direction of their spaces. Providing ergonomic furniture can support the physical comfort, posture, and well-being of the occupants12. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide2

Utilizing recycled materials achieves the green building objective of minimizing the need for landfills. Recycled materials are materials that have been recovered or diverted from the waste stream and processed into new products or materials. Utilizing recycled materials can reducethe amount of waste that is sent to landfills or incinerators, which can have negative impacts on the environment, such as occupying valuable land, contaminating soil and water, and emitting harmful gases. Utilizing recycled materials can also save natural resources, reduce greenhouse gas emissions, create jobs, and lower disposal costs12. References: LEED v4 Green Associate Candidate Handbook1, EPA’s Recycling Basics2

LEED prerequisites are the minimum requirements that a project must meet in order to be eligible for LEED certification. Prerequisites are mandatory for all projects and cannot be substituted or waived. If a project does not meet a prerequisite in one credit category, it does not qualify for certification, regardless of how many points it earns in other categories123.

A project that does not meet a prerequisite in one credit category does not forfeit all points in the same credit category, as points are awarded for meeting optional credits, not prerequisites. A project cannot file a CIR (Credit Interpretation Request) to seek clarification or exception for a prerequisite, as CIRs are only applicable for credits. A projectcannot substitute a prerequisite from an alternative rating system, as prerequisites are specific to each rating system and reflect the minimum standards for that system

Biomass is a renewable energy source that can be used to produce electricity from organic plant and waste material. It is considered green power by the U.S. EPA because it provides environmental benefits and reduces greenhouse gas emissions12.

A site with minimal hardscape (such as concrete, asphalt, or other impervious surfaces) that has a large permeable surface (such as soil, grass, or other vegetation) results in reduced rainwater runoff. This is because permeable surfaces allow rainwater to infiltrate into the ground, replenishing the groundwater and reducing the amount of water that flows over the surface and carries pollutants into storm drains and waterways. Reducing rainwater runoff is one of the goals of the LEED v4 Location and Transportation category, which offers credits for using strategies such as green roofs, permeable paving, rain gardens, and vegetated swales

The increase in air temperature in a developed area resulting from the dark surfaces of roadways, parking lots, and tarred rooftops is known as heat island effect. Heat island effect is a phenomenon whereby urban areas experience higher temperatures than rural areas due to the absorption and re-emission of solar heat by man-made surfaces. Heat island effect can have negative impacts on human health, energy consumption, air quality, and climate change. Some strategies to reduce heat island effect include increasing vegetation cover, using reflective or green roofs, using cool or permeable pavements, and enhancing natural ventilation.

A project can earn up to four maximum points under the Regional Priority credit. The Regional Priority credit is a bonus credit that rewards projects for addressing environmental issues that are of regional importance. The USGBC regional councils and chapters have identified six environmental issues for each zip code in the United States, and projects can earn one point for each issue they address, up to a maximum of four points. The other options are not correct. One, two, or three points are possible, but not the maximum number of points under the Regional Priority credit. References: LEED Green Associate Candidate Handbook, page 30; USGBC, [Regional Priority], page 1.

An integrative process is a collaborative approach that involves all project stakeholders in the design and decision-making process from the beginning to the end of a project. It aims to optimize the performance, environmental, social, and economic outcomes of a project by considering the interrelationships and synergies between various building and site systems. By identifying overlapping relationships, services and redundancies among systems, an integrative process can result in increased performance and reduced costs, as it can create more efficient, effective, and innovative solutions that meet the project goals and requirements. For example, an integrative process can help to reduce the energy demand of a building by integrating passive design strategies, such as building orientation, envelope design, daylighting, natural ventilation, and shading, which can also improve the indoor environmental quality and occupant comfort. An integrative process can also help to reduce the material and water consumption of a project by reusing existing resources, selecting durable and low-impact materials, and implementing water-efficient fixtures and systems, which can also reduce the waste generation and environmental impact of the project

Renovating an existing building using recycled and salvaged building materials is an example of a life-cycle approach to development or design. A life-cycle approach is an approach that considers the environmental impacts of a product or a project from cradle to grave, or from extraction of raw materials to disposal or reuse. Renovating an existing building using recycled and salvaged building materials reduces the environmental impacts associated with new construction, such as land use change, resource depletion, energy consumption, waste generation, and greenhouse gas emissions.The LEED Green Associate Candidate Handbook states that one of the intents of the Materials and Resources category is to “promote life-cycle assessment as a means of evaluating environmental impacts” [1, p. 15]. References: LEED Green Associate Candidate Handbook, [Life Cycle Assessment | U.S. Department of Energy]

receptacle load is the electrical load that is connected to the building’s electrical system through receptacles (also known as outlets or sockets). Receptacle load includes both regulated and non-regulated loads, such as computers, printers, monitors, lamps, refrigerators, microwaves, coffee makers, etc. Receptacle load does not include hard-wiredequipment, such as lighting fixtures, HVAC systems, or elevators12.

Receptacle load is one of the major components of plug and process loads (PPLs), which consume about 47% of primary energy in U.S. commercial buildings2. Reducing receptacle load can help improve building energy efficiency and achieve LEED certification. One of the strategies to reduce receptacle load is to use automatic receptacle controls, which are devices that turn off or reduce power to receptacles when they are not in use. Automatic receptacle controls are required by ANSI/ASHRAE/IES Standard 90.1-2019: Energy Standard for Buildings Except Low-Rise Residential Buildings, as well as NIH DRM 10.5.313.

An owner who wants to update the interior materials of the office while promoting a healthier indoor work environment using LEED strategies can specify low-emitting materials as one of the strategies to achieve this goal. Low-emitting materials are materials that have low or no emissions of volatile organic compounds (VOCs) or other pollutants into the indoor air. VOCsare organic chemicals that can evaporate or vaporize at room temperature and can adversely affect the indoor air quality (IAQ) of a building and the health, comfort, and productivity of the occupants. Some sources of VOCs in buildings are paints, coatings, adhesives, sealants, flooring, furniture, and cleaning products. Specifying low-emitting materials can reduce the exposure and risk of VOCs for the occupants and improve IAQ12. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide2

Regenerative design is a type of design that goes beyond sustainability and aims to restore or enhance the natural systems that support life. Regenerative design projects not only minimize their environmental impact, but also contribute positively to the environment and society. An example of regenerative design is a building that generates electricity from renewable sources, such as solar panels or wind turbines, and sends the excess electricity to the grid, thereby reducing greenhouse gas emissions and supporting the transition to a clean energy economy.

To maintain the LEED Green Associate credential, you must earn 30 continuing education hours every two years, with at least six of those hours being LEED specific. This requirement ensures that LEED Green Associates stay up-to-date with the latest developments in green building practices and LEED rating systems. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

A strategy for preventing light pollution is to install shielded fixtures. Light pollution is the excessive or inappropriate use of artificial lighting that can have adverse effects on human health, wildlife, ecosystems, and astronomy. Shielded fixtures are lighting devices that direct light downward and prevent light from escaping upward or sideways. Shielded fixtures can reduce light pollution by minimizing glare, sky glow, light trespass, and energy waste13. References: LEED v4 Green Associate Candidate Handbook1, International Dark-Sky Association’s Lighting Basics3

Integrative process is a collaborative approach that involves all project stakeholders in the design and decision-making process from the beginning to the end of a project. It aims to optimize the performance, environmental, social, and economic outcomes of a project by considering the interrelationships and synergies between various building and site systems. One of the key aspects of integrative process is to establish feedback loops that allow for continuous monitoring, evaluation, and improvement of the project performance during its operation. Therefore, option C is an example of integrative process, while the other options are not directly related to it. References: Integrative process | U.S. Green Building Council, section “Integrative Process”; Understanding Integrative Design in LEED v4, page 1; LEED Integrative Process Credit Explained, section “INTEGRATIVE PROCESS V4 CREDIT OVERVIEW”

 Life-cycle costing is an economic analysis method that considers all costs associated with an asset over its entire life cycle, from acquisition and installation to operation, maintenance, and disposal. In this case, the building manager is comparing the total costs of owning and operating two different boilers over their respective lifetimes. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Chlorofluorocarbons (CFCs) are a type of compound that was widely used in the 20th century in various applications, including as a refrigerant in air conditioning systems such as centrifugal chillers. CFCs are known to deplete the ozone layer when released into the atmosphere, and their use has been phased out in many countries under the Montreal Protocol. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Greenwashing is a term that describes misinformation presented to consumers to portray a product or policy as being more environmentally friendly than it is. Greenwashing can be done by using vague or misleading claims, false labels or certifications, irrelevant or exaggerated benefits, or hidden trade-offs. Greenwashing can deceive consumers into buying products or supporting policies that are not trulygreen, and undermine the credibility and effectiveness of genuine green initiatives1 . References: LEED v4 Green Associate Candidate Handbook1, EPA’s Greenwashing

The Materials and Resources Credit category calculation addresses the permanently installed building products that are part of the building’s structure, enclosure, and interior elements. These include framing, flooring, insulation, windows, doors, interior walls, ceilings, and finishes. Process equipment, elevators, furniture, and formwork for concrete are not included in the calculation . References: LEED v4 Green Associate Candidate Handbook, LEED v4 BD+C Reference Guide

A drip irrigation system provides maximum water efficiency for a building irrigation system. A drip irrigation system delivers water directly to the root zone of plants, minimizing evaporation, runoff, and overspray. This reduces water consumption and prevents water pollution from fertilizers and pesticides. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving water efficiency in landscaping is to “use efficient irrigation systems, such as drip irrigation” [1, p. 14]. References: LEED Green Associate Candidate Handbook, [Drip Irrigation | U.S. Department of Agriculture]

Designing buildings to shade each other can help reduce energy demand by decreasing cooling loads. By strategically positioning buildings on a site, it’s possible to use the buildings themselves to block solar heat gain, reducing the need for air conditioning. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

ASHRAE 189.1 is a standard that provides guidance for the design, construction, and operation of high-performance green buildings that comply with building codes and voluntary rating systems. The standard covers topics such as site sustainability, water efficiency, energy efficiency, indoor environmental quality, and the impact of materials and resources12. References: LEED v4 Green Associate Candidate Handbook1, ASHRAE’s Standard 189.12

Life-cycle costing (LCC) is a method of estimating the total cost of owning and operating an asset over its entire life span. LCC considers all costs associated with the acquisition, installation, operation, maintenance, and disposal of the asset12. LCC can help businesses make better decisions about purchasing, budgeting, pricing, and investing in assets2.

LCC does not quantify environmental impacts such as acidification, eutrophication, or global warming. These impacts are measured by life-cycle assessment (LCA), which is a method of evaluating the environmental effects of a product or service throughout its life cycle. LCA considers the inputs and outputs of materials, energy, and emissions at each stage of the product or service life cycle34. LCA can help businesses identify opportunities to reduce their environmental footprint, improve their sustainability performance, and comply with environmental regulations4.

However, LCC and LCA are often used together to compare different alternatives based on both economic and environmental criteria. For example, a business may use LCC to estimate the energy costs of different lighting options, and LCA to estimate the greenhouse gas emissions of each option. By combining LCC and LCA results, the business can select the option that minimizes both costs and emissions.