Huawei H12-893_V1.0 Dumps

VXLAN (Virtual Extensible LAN) tunnels are used to encapsulate Layer 2 traffic over a Layer 3 network, a key feature in Huawei’s data center solutions. The endpoints of a VXLAN tunnel are VXLAN Tunnel Endpoints (VTEPs), identified by their IP addresses.

Tunnel Identification:A VXLAN tunnel is uniquely identified by the pair of VTEP IPaddresses (local and remote), along with the VNI (VXLAN Network Identifier). This pair ensures the tunnel is specific to the communication path between the two VTEPs.

Tunnel Establishment:During setup, VTEPs exchange information to learn each other’s IP addresses. This can occur manually (static configuration) or dynamically (e.g., via BGP EVPN). The underlay network must provide Layer 3 reachability between the VTEP IP addresses, typically using routing protocols (e.g., OSPF, BGP) to ensure IP connectivity.

Reachability Condition:If the local and remote VTEP IP addresses are reachable at Layer 3, the tunnel can be established, allowing encapsulation and decapsulation of VXLAN traffic. This is a fundamental requirement in Huawei’s VXLAN implementation.

The statement isTRUE (A)because a VXLAN tunnel’s identification and establishment depend on reachable VTEP IP address pairs at Layer 3.References:Huawei HCIP-Data Center Network Training – VXLAN Tunneling; CloudFabric VXLAN Deployment Guide.

Microsegmentation in Huawei’s data center networks (e.g., CloudFabric with SDN) divides Endpoint Groups (EPGs) to enforce fine-grained security policies. EPGs group endpoints (e.g., VMs) based on attributes. Let’s evaluate each option:

A. Operating system:This is true. The OS type (e.g., Linux, Windows) can be used to segment EPGs, enabling policy enforcement based on OS-specific security needs.TRUE.

B. VM name:This is true. VM names can be used as identifiers for microsegmentation, allowing policies to target specific VMs.TRUE.

C. IP address:This is true. IP addresses are commonly used to define EPG boundaries, especially for network-based segmentation.TRUE.

D. MAC address:This is true. MAC addresses can segment EPGs, particularly for Layer 2-based policies or device-specific isolation.TRUE.

All optionsA, B, C, and Dare valid conditions for microsegmentation to divide EPGs in Huawei’s implementation.References:Huawei CloudFabric Data Center Network Solution – Microsegmentation; HCIP-Data Center Network Training – EPG Configuration.

IP address planning is critical in Huawei’s CloudFabric data center networks to ensure scalability and efficiency. Let’s evaluate each statement:

A. Service addresses refer to the IP addresses of servers, hosts, and gateways:This is true. Service addresses are assigned to endpoints (servers, hosts) and gateways, distinguishing them from management or interconnection IPs in DC planning.TRUE.

B. IP addresses with a 24-bit mask are recommended for use as interconnection IP addresses:This is false. A 24-bit mask (/24) is typically used for service subnets, while interconnection IPs (e.g., between spine and leaf) often use smaller masks (e.g., /31 or /30) to conserve addresses and align with point-to-point links.FALSE.

C. IP addresses must be contiguous. The routes with contiguous IP addresses can be summarized easily on a hierarchical network:This is false. Contiguity is desirable for summarization but not mandatory; non-contiguous blocks can still be managed with proper routing design (e.g., using BGP).FALSE.

D. IP address allocation should be simple and easy to manage, reflect network layers, and simplify network management and network expansion:This is true. Huawei recommends structured allocation (e.g., by layer or function) to streamline management and support future growth.TRUE.

Thus,A and Dare true statements about IP address planning.References:Huawei CloudFabric Data Center Network Solution – IP Planning; HCIP-Data Center Network Training – Address Management.